AU Tool SDT106 User manual

深圳市偶然科技有限公司
Shenhua Innovation Park, Baoan, Shenzhen, China
www.autooltech.com
[email protected]
[phone] / [phone]
深圳市偶然科技有限公司
深圳市光明新区长春南路中鹏程工业园
www.autooltech.com
User Manual
AUTOOL SDT106
Smoke Leak Detector

1
Caution
Non- technical person shall not change, disassemble or repair
the product, otherwise all losses caused by this shall be bared
by the user himself.
This product is powered by electricity and should not be used
as a toy for children.
To avoid short circuit, do not immerse the product in water or
other liquid.
Please try to use the power supply and power cord supplied by
manufacturer as standard.
Please do not expose this product to strong light or high
temperature when it’s not at use.
Keep away from smoke-sensitive parts for leak detection, for
example- the headlight.
•
•
•
•
•
•

3
Main Unit Structure
Operation
Open the engine cover, and hang the detector in the cover.
Disconnect the pipe that needs to be connected with detector.
If the pipe needs to be disconnected in the middle, please
secure the other side with a rubber stopple.
Secure this side with proper taper stopple/pipe, and connect it
with smoke output tube.
•
SDT106 is designed for detecting the leakage of pipe systems on
cars, motorcycles, such as fuel pipe, air intake system and cooling
tank.
SDT106 is for all pipe system and EVAP.
① Oil Filler: To fill in oil.
② Working indicator: It is light when the detector works.
③ Power switch: Switch it on, and the detector works.
④ Power socket port.
⑤ Smoke output: The smoke outlet which connecting with
detection port.
•
•
Getting Started
2
When you use this detector the first time, please fill 20-30ml
oil, not beyond this range.
Fresh oil can be filled only when the smoke is light, do not add
test oil excessive to the volume of the measuring bottle at one
time, 15ml each time will be good enough. Otherwise the
smoke outlet equipment will be affected.
Replace the detector oil regularly. Before filling fresh oil,
please pour out the old remaining oil in the detector.
Detector oil selection : Liquid paraffin and baby oil are all OK.
But please make sure there is no water inside, and sticky
liquid is forbidden.
The test equipment has a temperature protector. If the
machine is operated continuously for a long time, it will
automatically stop and protect after overheating. Meanwhile,
the air pump works normally, the heating system stops
working, and when the temperature drops to a reasonable
temperature, the equipment resumes normal operation. If you
need to work continuously, after 15 minutes of work, the
equipment shall be shut down for 3-5 minutes.
User can use strong airflow for the outside of the device to
cool it down, but do not directly use liquid to dissipate heat.
•
•
•
AUTOOL SDT106 is a professional auto pipe leak detect tool. It
will help user to position leakage on any pipe system quickly and
exactly,such as EVAP system, intake system, exhaust system and
so on. It helps technician and car user to solve problem quickly at
one time, greatly eliminating repeated repairing work, significantly
reducing diagnostic time and improving customer service.
•
•
•

3
Main Unit Structure
Operation
Open the engine cover, and hang the detector in the cover.
Disconnect the pipe that needs to be connected with detector.
If the pipe needs to be disconnected in the middle, please
secure the other side with a rubber stopple.
Secure this side with proper taper stopple/pipe, and connect it
with smoke output tube.
•
SDT106 is designed for detecting the leakage of pipe systems on
cars, motorcycles, such as fuel pipe, air intake system and cooling
tank.
SDT106 is for all pipe system and EVAP.
① Oil Filler: To fill in oil.
② Working indicator: It is light when the detector works.
③ Power switch: Switch it on, and the detector works.
④ Power socket port.
⑤ Smoke output: The smoke outlet which connecting with
detection port.
•
•
Getting Started
2
When you use this detector the first time, please fill 20-30ml
oil, not beyond this range.
Fresh oil can be filled only when the smoke is light, do not add
test oil excessive to the volume of the measuring bottle at one
time, 15ml each time will be good enough. Otherwise the
smoke outlet equipment will be affected.
Replace the detector oil regularly. Before filling fresh oil,
please pour out the old remaining oil in the detector.
Detector oil selection : Liquid paraffin and baby oil are all OK.
But please make sure there is no water inside, and sticky
liquid is forbidden.
The test equipment has a temperature protector. If the
machine is operated continuously for a long time, it will
automatically stop and protect after overheating. Meanwhile,
the air pump works normally, the heating system stops
working, and when the temperature drops to a reasonable
temperature, the equipment resumes normal operation. If you
need to work continuously, after 15 minutes of work, the
equipment shall be shut down for 3-5 minutes.
User can use strong airflow for the outside of the device to
cool it down, but do not directly use liquid to dissipate heat.
•
•
•
AUTOOL SDT106 is a professional auto pipe leak detect tool. It
will help user to position leakage on any pipe system quickly and
exactly,such as EVAP system, intake system, exhaust system and
so on. It helps technician and car user to solve problem quickly at
one time, greatly eliminating repeated repairing work, significantly
reducing diagnostic time and improving customer service.
•
•
•

5
Packing List
Warranty Access
Repair or replace the equipment will be done according to the
specific fault conditions;
We guarantee that all replacement parts, accessories or
equipment are brand new;
When there is a product breakdown that can not be solved
within 90 days, customer should provide video and pictures as
proof, we will bear the freight cost and provide customer the
accessories in need to replace. After receiving the product for
more than 90 days, the customer shall bear the freight cost,
we will provide the accessory for free to replace.
•
Specifications
Brand
Type
Output Pressure
Package Size
Certification
AUTOOL
SDT106
≤15psi（≈1kg）
275*220*255 mm
FC, CE, ROHS
Name
Input Voltage
Smoke Output
Main Unit Weight
Smoke Leak Detector
DC 12V
1~6 L/min
3.8 kg
Main Unit
Hook
Rubber Stoppers (with serial specification)
Taper Stopper
Taper Pipe
30ml Oil Bottle
User Manual
EVAP Tool Set
1
1
1
1
1
1
1
1
Warranty
There are 3 years' warranty for AUTOOL product main unit and
1 year warranty for the accessories since the day the customers
have received the product parcel.
•
•
4
Connect detector with DC12V battery: red with positive, black
with negative. Do not connect in a contrary way.
Turn on the power switch, and the detector starts to work.
In about 3 minutes, the pipe will be filled with smoke. Check
the leak parts. Please use head lamp if necessary.
After leak detection, please connect the wires and pipe well
back together.
•
•
•
Maintenance
Turn on device then block smoke exhaust port on SDT106,
record pressure gauge value.
Connect smoke exhaust port to the pipe system you want to
test.
Wait for a while. Pressure gauge value decrease means the
pipe system have leakage, pressure gauge value show "0"
means diameter of leakage point is more than 0.3mm.
•
•
•
•
With long time high temperature, the smoke and oil will oxidize
and deteriorate. It will infect the service life of smoke
generated part, so please change smoke and oil regularly.
When the smoke output has water drops, please replace with
fresh oil.
Please fill fresh oil with equipped oil bottle
•
•
•
How to Do Leakage Test

5
Packing List
Warranty Access
Repair or replace the equipment will be done according to the
specific fault conditions;
We guarantee that all replacement parts, accessories or
equipment are brand new;
When there is a product breakdown that can not be solved
within 90 days, customer should provide video and pictures as
proof, we will bear the freight cost and provide customer the
accessories in need to replace. After receiving the product for
more than 90 days, the customer shall bear the freight cost,
we will provide the accessory for free to replace.
•
Specifications
Brand
Type
Output Pressure
Package Size
Certification
AUTOOL
SDT106
≤15psi（≈1kg）
275*220*255 mm
FC, CE, ROHS
Name
Input Voltage
Smoke Output
Main Unit Weight
Smoke Leak Detector
DC 12V
1~6 L/min
3.8 kg
Main Unit
Hook
Rubber Stoppers (with serial specification)
Taper Stopper
Taper Pipe
30ml Oil Bottle
User Manual
EVAP Tool Set
1
1
1
1
1
1
1
1
Warranty
There are 3 years' warranty for AUTOOL product main unit and
1 year warranty for the accessories since the day the customers
have received the product parcel.
•
•
4
Connect detector with DC12V battery: red with positive, black
with negative. Do not connect in a contrary way.
Turn on the power switch, and the detector starts to work.
In about 3 minutes, the pipe will be filled with smoke. Check
the leak parts. Please use head lamp if necessary.
After leak detection, please connect the wires and pipe well
back together.
•
•
•
Maintenance
Turn on device then block smoke exhaust port on SDT106,
record pressure gauge value.
Connect smoke exhaust port to the pipe system you want to
test.
Wait for a while. Pressure gauge value decrease means the
pipe system have leakage, pressure gauge value show "0"
means diameter of leakage point is more than 0.3mm.
•
•
•
•
With long time high temperature, the smoke and oil will oxidize
and deteriorate. It will infect the service life of smoke
generated part, so please change smoke and oil regularly.
When the smoke output has water drops, please replace with
fresh oil.
Please fill fresh oil with equipped oil bottle
•
•
•
How to Do Leakage Test
