AUDAC ASP20 User manual

INSTALLATION MANUAL
ASP20 SPHERICAL HANGING SPEAKER
STEP 1
STEP 2
The ASP20 comes with a xed connection cable with a length of 3.5
meters. The connection cable consists of 5 copper cores whereby the
desired power tapping can be selected and a steel core for safe & secure
mounting and suspension of the speaker.
Slide the ceiling cover cap over the connection wire and put the
connection cable through the bottom hole of the included plastic wire
holder as shown in the drawing. Feed the cable through until the
required cable length for suspending is reached. Then pull the cable
through the second hole (middle one) until it is tight.
STEP 3
Cut the excess length of the cable to the desired length for reaching the
connection box, and remove the outer jacket for about 10 centimeters.
Once the outer jacket is removed, terminate the steel safety wire with
a loop whereby it can be hung to the included snap hook. Termination
of the steel core is done by inserting into the screw cable clamp, pulling
it through and insert it on the other end so a loop is made. Tighten the
screw afterwards.
STEP 4
Hang the speaker to the provided point on the ceiling and x it by
suspending the plastic wire holder to it using the included snap hook.
Make sure the suspension point can structurally support the weight
of the speaker and choose the fasteners depending on the mounting
surface (concrete, wooden, steel, ...).
STEP 5
Connect the speaker. The correct power tapping is chosen by connecting
the appropriate conductors to the wires coming from the amplier. A
description of the power tap selection is shown on the sticker on top
of the loudspeaker or as follows:
• Red: 250 Ω - 70V/20W
• Yellow: 500 Ω - 100V/20W - 70V/10W
• Blue: 1k Ω - 100V/10W - 70V/5W
• Green: 2k Ω - 100V/5W - 70V/2.5W
• Black: COM
Slide the ceiling cover over the connection and xation parts to nish it.

The WEEE marking indicates that this product
should not be disposed with regular household
waste at the end of its product life. This regulation
is created to protect both the environment and
human health.
This product is developed and manufactured with
high quality materials and components which can
be recycled and/or reused. Please dispose of this
product at your local collection point or recycling
center for electrical and electronic waste. Do this
to make sure that the product is recycled in an
environmental friendly way, and help to protect
the environment in which we all live.
INSTALLATION MANUAL
ASP20 SPHERICAL HANGING SPEAKER
• IF THERE IS ANY DAMAGE TO THE CARTON BOX
OR THE UNIT ITSELF, INFORM YOUR VENDOR
IMMEDIATELY.
• ALWAYS FOLLOW THE LOCAL REGULATIONS AND
REQUIREMENTS REGARDING INSTALLATION,
SUSPENSION AND CONNECTION OF THIS
LOUDSPEAKER. EVEN WHEN OTHERWISE SPECIFIED
IN THIS DOCUMENT.
• THE INSTALLATION OF THIS LOUDSPEAKER SHALL
BE DONE BY QUALIFIED PERSONNEL ONLY.
• USE CABLES OF THE RIGHT GAUGE TO CONNECT
THE LOUDSPEAKER
• USE CABLES WITH CLEAR COLOR CODING
INDICATING THE POLARITY AND MAINTAIN THE
SAME POLARITY THROUGHOUT THE WHOLE
SYSTEM.
• ONLY USE THE CORRECT AMPLIFIER OUTPUT
VOLTAGE AND IMPEDANCE. EXCEEDING THESE
LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
• AVOID EXPLOSIONS: DO NOT USE THE SPEAKER
AROUND GASOLINE, THINNER OR OTHER
COMBUSTIBLES
• AVOID ELECTRIC SHOCKS: SWITCH OFF THE
AMPLIFIER WHEN CONNECTING THE LOUDSPEAKER
• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED
PERIOD OF TIME AT DISTORTED SOUND. THIS
COULD CAUSE PERMANENT DAMAGE.
• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE. NEVER THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE
• CLEAN ONLY WITH DRY CLOTH
• HEED ALL WARNINGS AND FOLLOW ALL
INSTRUCTIONS
• NEVER EXPOSE THIS EQUIPMENT TO RAIN,
MOISTURE, ANY DRIPPING OR SPLASHING LIQUID.
• DO NOT INSTALL THIS UNIT NEAR ANY HEAT
SOURCES SUCH AS RADIATORS OR OTHER
APPARATUS THAT PRODUCE HEAT
• DO NOT PLACE THIS UNIT IN ENVIRONMENTS
WITH A HIGH LEVEL OF DUST, HEAT, MOISTURE OR
VIBRATION
• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY.
DO NOT USE IT OUTDOORS
• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED
BY THE MANUFACTURER.
• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT
CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE
SPEAKER. IGNORING THIS CAN BRING THE SPEAKER
DOWN.
• DO NOT USE ANY OTHER METHOD THAN SPECIFIED
TO MOUNT THE SPEAKER. IF EXTREME FORCE IS
APPLIED TO THE SPEAKER, IT COULD FALL DOWN
• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN
IT IS MOUNTED HIGH UP. ONLY USE INDUSTRY-
ACCEPTED RIGGING TOOLS AND METHODS
• CAREFULLY CHECK THE UNIT’S CONDITION AFTER
UNPACKING.
PRECAUTIONS
This product contains no user serviceable parts.
Refer all servicing to qualied service personnel. Do
not perform any servicing (unless you are qualied
to do so.)
CAUTION - SERVICING
This product conforms to all the essential
requirements and further relevant specications
described in following directives: 2014/30/EU (EMC)
and 2014/35/EU (LVD)
EC DECLARATION OF CONFORMITY
WASTE OF ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE)