
AHarmanInternationalCompany
▲Simple, intuitive operation
▲Easy installation
▲Separate-component-quality audio
performance
▲Adjustable input levels for each source
▲Independent bass and treble levels for each
PX-700 room
▲Convenient, expanded programming via
PC or laptop
▲Create and maintain extensive IR library
▲Import/export utilities for merging/updating
master library
▲Rack-mountable chassis
▲Eight audio inputs plus a paging input for
each zone
▲Front-panel IR receiver, rear-panel IR
In/Out jacks
▲Built-in RS-232 interface accessible from either
front or rear panel
▲Built-in IR learning device
▲Zone-linking capabilities
▲Any five of eight sources available from
KPS101 Keypad in each zone
▲Eight sources available from touchscreens and
handheld remotes
▲Selectable turn-on source in each zone
▲Each zone assignable to one of three ALL ON
groups (or none)
▲Expandable to 36 zones with additional
PX-700 controllers
▲Compatible with PX-603 Multiroom Expander
(add up to three rooms per zone)
▲Compatible with Audioaccess multiroom,
12-channel amplifiers
Features
ConnectorComplement/Specifications
Inputs
▲Eight stereo audio inputs with buffered
loopthru capability
▲One mono page input
▲Trigger input allows sharing of audio sources
with other systems
▲Four-conductor keypad input
▲PC Link jack RS-232 interface on front panel
▲Nine-pin D-sub RS-232 interface on back panel
Outputs
▲Six-room preamp outputs (one per zone)
▲Six independent fixed outputs
▲One record output from the main zone
▲Six programmable 12VDC trigger outputs
(one per zone)
▲Eight dedicated IR source outputs
▲One all-IR source output
Audio
▲Connector: gold-plated RCA jack
▲Input Impedance: 20kΩ
▲Maximum Input Level
(for 0.1% THD+N at any output): 2.0VRMS
▲Output Impedance: 330Ω
▲Maximum Output Level
Source-Buffered Outputs: 2.0VRMS
Primary Outputs: 2.75VRMS
Expansion Outputs: 2.0VRMS
▲Gain
Source-Buffered Outputs: 0dB (unity gain)
Primary Outputs: 18.5dB
(volume set at 100)
Expansion Outputs: –1dB
▲S/N (Input: 2.2VRMS, 1kHz, primary
room volume at unity gain;
Measurement Bandwidth: 22kHz)
Source-Buffered Outputs: >113dB
Primary Outputs: >95 dB
Expansion Outputs: >100dB
▲Frequency Response
Source-Buffered Outputs: 10Hz to 110kHz,
±1dB
Primary Outputs: 10Hz to 70kHz,
±1dB
Expansion Outputs: 10Hz to 75kHz,
±1dB
▲THD + Noise (Input: 1VRMS, 1kHz,
primary room volume at unity gain;
Measurement Bandwidth: 30kHz)
Source Buffered Outputs: <0.003%
Primary Outputs: <0.006%
Expansion Outputs: <0.005%
▲L/R Crosstalk (at 1kHz)
Source-Buffered Outputs: <–110dB
Primary Outputs: <–92dB
Expansion Outputs: <–104dB
▲Source-to-Source Crosstalk
(at 1kHz, any two sources)
Source-Buffered Outputs: <–110dB
Primary Outputs: <–100dB
Expansion Outputs: <–105dB
▲Volume Control: 0 to 100dB in 0.5dB steps
▲Bass: shelving type, ±12dB in 2dB steps
at 100Hz
▲Treble: shelving type, ±12dB in 2dB steps
at 10kHz
Trigger Inputs and Outputs
▲Connector: 3.5mm Mini Phone Jack
▲Trigger Out and Zone Trigger Output Voltage:
8to16VDC (depending onlinevoltage and load),
tip positive
▲Page Trigger In: dry contact
▲Trigger In: 4 to 30VDC, tip positive;
3 to 24VRMS AC
Power Inlet
▲Connector: male IEC320
▲Power Requirement: 115V AC, 50/60Hz,
50 watts (not including switched outlet)*
Switched Outlet
▲Connector: NEMA 5-15R*
▲Maximum Load: 300 watts
Dimensions
▲17-5/16" W x 4" H x 15-1/2" D
(440mm x 102mm x 394mm)
(includes connectors and feet)
Weight
▲11.5 lb (5kg)
*120V version. 230V version power require-
ment is 230V AC, 50/60Hz, 50 watts;
switched outlet connector is female IEC320.
Audioaccess
250Crossways ParkDrive
Woodbury,NY 11797
www.audioaccess.com
888.691.4171
Fax:516.682.3510
©2003Harman InternationalIndustries, Incorporated
PartNo. AAPX-700PI
PX-700sellsheet 10/29/03 5:23 PM Page 2