AudioCodes RX15 User manual

AudioCodes RX15 Speakerphone
Quick Guide
P a g e | 1
1. Before Getting Started
Congratulations on purchasing the AudioCodes RX15 Speakerphone! Before you start, make sure you
received the following items in the shipped box:
✓RX15 Speakerphone
✓USB Bluetooth dongle
✓USB Type-C cable
2. Physical Description
The figure below shows the RX15.

P a g e | 2
3. Product Usage
1. Turn on/off the speaker:
Long press and hold the power key for 2 seconds to turn on or off the speaker.
2. Check battery status:
In the power-on state, press the power key to view the current battery level. When the light bar
displays 5 squares, the battery is full. When the battery status is low, the red indicator light of the
power key flashes and the low electric quantity prompt tone will broadcast.
3. Volume adjustment:
Press volume "+" and volume "-" keys to increase or decrease the volume accordingly.
4. Two types of connection modes:
Mode 1: Connect the computer/conference plat (Windows or Mac) via USB cable.
Mode 2: Connect with Bluetooth or Bluetooth dongle.
When the Bluetooth indicator flashes, it indicates that the equipment is in Bluetooth
pairing state. Enable Bluetooth on your laptop, PC or other mobile device and select to
connect this equipment from the Bluetooth equipment list.
5. Answer/Hang up the call:
•When there is an incoming call, press the key to answer the call.
•When it is in calling state, press the key to hang up the call.
•When there is an incoming call, long press and hold the key for 3 seconds to reject the call.

P a g e | 3
4. Configuring Settings for Zoom
To configure Zoom settings:
1. Navigate to the Zoom Settings menu on your device.
2. Click Audio.
3. From the 'Speaker' drop-down list, select AudioCodes Speaker RX15.
4. Adjust the speaker volume, and then close Settings.

P a g e | 4
5. Configuring Settings for Microsoft Teams
To configure Microsoft Teams settings:
1. Navigate to the Teams Settings menu on your device.
2. Click Devices.
3. From the 'Speaker' drop-down list, select AudioCodes Speaker RX15.
4. From the 'Microphone' drop-down list, select AudioCodes Speaker RX15.
5. Adjust the microphone sensitivity, and then close Settings.

P a g e | 6
International Headquarters
1 Hayarden Street,
Airport City
Lod 7019900, Israel
Tel: [phone]
Fax: [phone]
AudioCodes Inc.
200 Cottontail Lane
Suite A101E
Somerset NJ 08873
Tel: [phone]
Fax: [phone]
Contact us: https://www.audiocodes.com/corporate/offices-worldwide
Website: https://www.audiocodes.com/
©2021 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant,
MediaPack, What’s Inside Matters, OSN, SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your
Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice, AudioCodes Meeting Insights, AudioCodes Room Experience
and CloudBond are trademarks or registered trademarks of AudioCodes Limited. All other products or trademarks are
property of their respective owners. Product specifications are subject to change without notice
Notice Information
Information contained in this document is believed to be accurate and reliable at the time of printing.
However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy
of printed material after the Date Published nor can it accept responsibility for errors or omissions.
Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-
documents.
This document is subject to change without notice.
Date Published: December-1-2021
Document #: LTRT- 18207