Audiolab 8000S User manual

audiolab
International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU
The original 8000 series from Audiolab
left a legacy of revolutionary products,
one of which being the legendary
8000A; a product which lead the way
in simple but technically advanced
stereo systems.
The 8000S has been designed as a
powerful upgrade from the legendary
8000A. With this fine heritage behind
it, the virtues of the system are many;
not least of which is flexibility.
Able to operate in any one of five
modes the 8000S is a more than
worthy replacement for - and an
essential addition to - any home with
a passion for high quality audio.
Rated output power
Typical output power
Preamplifier input impedance
Preamplifier maximum output
Power amplifier input impedance
Frequency response (-3 dB)
Frequency response (±0.5dB)
Channel separation
Crosstalk rejection
Operating temperature range
Power consumption
Dimensions (WxHxD - mm)
60 W per channel into rated load impedance (8Ω),95 W
into 4Ω
72 W per channel into rated load impedance (8Ω),
115 W into 4Ω
20 kΩnominal
Greater than 7.76 V rms
47 kΩnominal
1 Hz - 65 kHz
20 Hz - 20 kHz
Greater than 60 dB at 1 kHz
Greater than 80 dB at 1 kHz
10 - 35ºC
Less than 300 W Idle/Power
445 x 74 x 335
Specification
8000S
Integrated Amplifier
The 8000S modes
Pre - Pre Amplifier, activates the pre-outs
de-activates the internal power amp
Mute - Mutes the output
Integrated - Intgrated Amplifier
Pre-Power - Activates the pre-outs allowing an
additional power amp to be used for
Bi-amping
Pre-Power AV - Allows an AV processor direct access
to the pre-out / power in sockets