Audiovox D1210 User manual

12" LCD TV with DVD Player
Operating Instructions
Model No. D1210
For assistance, please call: 1-800-645-4994
Or visit us at
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference
128-6524A
© 2002 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING
YOUR AREA
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions, be
proven defective in material or workmanship within 12 months from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the
Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation of
the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company,
has suffered or been damaged through alteration, improper installation, mishandling, misuse,
neglect, accident, or by removal or defacement of the factory serial number/bar code label(s).
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S
LIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFORTHEPRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE
DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHT
WITHINAPERIODOF24MONTHSFROMDATEOFORIGINALPURCHASE. INNOCASESHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No
person or representative is authorized to assume for the Company any liability other than
expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclusions may not
apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
12 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
128-5495C
U.S.A. : AEC 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 !1-800-645-4994

0
0
1
Important Safety Instructions
Important Safety Instructions
Safety Cautions
0
0
2
Safety Cautions
Do not step over or place
objects on the electrical
cord. Do not over load your
electrical outlet.
For safety reasons, do not
touch any part of the TV,
electrical cord, TV antenna
or cable during bad weather
and thunderstorms.
To avoid short circuit,
electrical shock or fire; keep
this product indoors and
away from rain and other
forms of liquid.
Be sure that the AC plug is
disconnected from the outlet
before performing any kind of
maintenance. When cleaning
the TV, do not use liquid
chemical cleaners or water
sprays. Use a damp cloth to
wipe out the dust.
For safety reasons, this
product must be placed on
firm and stable surface at all
times. Unstable surface will
cause product to fall thus
damaging the product and
causing harm to those near it.
Keep this product away from
humid environments. Such as
near bath tubs, kitchen sinks,
washing areas, swimming
pools and basements.
Users are advised to read this user's guide before operating the product.
The Lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"DANGEROUS VOLTAGE" within the product's enclosure that may be
of sufficient magnitude to constitude a risk or electric shock to persons.
The Exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing instructions in the literature accompanying the product).
Federal Communication Commission Information
(FCC)
This Equipment has been tested and found to comply with the limits for a TV Broadcast
Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications if this equipment does cause or receive interference, which can be
determined by turning equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the TV antenna
Increase the separation between TV and other equipment
Connect TV into separate outlet from equipment
Consult the dealer or an experienced raido/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BCAK)
NO USER-DERVICEABLE PARTS INSIDE
PEFER SERVICING TO CLIALIFIED SERVICE
PERSONNEL
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN

Users are advised to read this user's guide before operating the product.
0
0
3Safety Cautions
Safety Cautions
DVD Caution
0
0
4
Keep product away from
other heat sources. Such as
heat generating electrical
appliances, heaters, gas
stoves.
Avoid dropping the Remote
Control at any time.
Good ventilation is essential to
TV components' life span.
Do not place TV monitor on
book shelf or enclosed cabinets.
Never block TV airvents.
This LCD TV will break if drop
or hit; should such incident
occur, please send the product
back to manufacturer for
immediate repair.
Never attempt to repair the
TV yourself at any time.
When any fault occur, be
sure to unplug the cord from
the main electrical outlet
before calling our qualified
serviceman for repair.
If liquid or foreign objects
accidentally drops into the TV,
be sure to have qualified
serviceman check the product,
before turn the TV power on.
Beware If you are not going to use the TV set for a long period of time, unplug your cord from the main power
outlet to conserve electricity. This is because as long as your TV set is plugged in, it consumes electricity.
DVD CAUTION: This unit employs a laser system. To
ensure the proper use of the unit, read this manual carefully
and keep it for future reference. To prevent direct exposure
to the laser radiation, do not open the cabinet. Invisible
laser radiation could be present when the cabinet is opened
or the interlocks are defeated. DO NOT stare into the laser
beams. Use of any controls, adjustments, or procedures
other than those specified herein may result in hazardous
radiation exposure!
Region Management Information – This Player is
designed to respond to the Region Management Informa-
tion recorded on DVDs, The region number of this player
is “1”. If the region number described on the DVD does
not correspond to the region number of this player, this
player cannot play this disc.
Dolby
Manufactured under license from Dolby Laboratories.
“Dolby” , “Pro Logic” and the double-D symbol are trade-
marks of Dolby Laboratories. Confidential Unpublished
Works © 1992-1997 Dolby Laboratories, Inc. All rights
reserved.

0
0
5Cautions
Cautions
Accessories
0
0
6
Accessories
Macrovision
This product incorporates copyright protection technology
that is protected by method claims of certain U.S patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation. It is intended for home and
other limited viewing use only unless otherwise autho-
rized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Package Contents
1. TV /DVD Combination Unit w/Speakers
2. 90 degree Coaxial slip-on Connector
3. Remote Control
4. ACAdapter
5. Cigarette Lighter Adapter
6. Wireless IR Headphone
7. 3.5mm -Composite (RCA Cable)
8. Storage Bag and Mounting Bag w/Mounting straps
9. Owner’s Manual
Important Information Regarding Use of Video Games,
Computer, Captions or other Fixed Image Displays.
The extended use of a fixed image program material can
cause permanent “Shadow Image” on the LCD Panel. The
Background image is viewable on normal programs in the
form of a stationary fixed image. This type of irreversible
LCD panel deterioration can be limited by observing the
following steps:
a. Reduce the brightness/contrast setting to a minimum
viewing level.
b. DO NOT display the fixed image for extended periods of
time.
c. Turn the power off when not in actual use.
Recycling –This product utilizes tin-lead solder, and
has a fluorescent lamp containing a small amount of mer-
cury. Disposal of these materials may be regulated in your
community due to environmental considerations. For dis-
posal or recycling information please contact your local
authorities, or the Electronics Industries Alliance: http://
www.eiae.org/

0
0
7TV Setup
TV Setup
Power Connection
Start Up
0
0
8
Start Up
Antenna Installation
Using a good quality TV antenna accessories is essential to LCD TV reception.
of antenna systems on the market: below are connectors and the different types
1. The 75£[ system with connonly seen F type round head connectors
which requires no tools for easy installation.
2. The 300£[ system with the flat connectors system.
Can be used with adaptor on 300£[°ˆ°˜ 75£[ connectors
(Accessories not included)
Outdoor Antenna Installation
If you are installing an outdoor
antenna, you may use one of
the following methods:
1. Use VHF/UHF mixed outdoor
antenna.
2. Use independent VHF or
independent UHF outdoor
antenna.
Installing the outdoor antenna
to a TV tuner box.
Keep your TV antenna cabling to the minimum
required length to avoid unnecessary interference
viewing TV.
Avoid installing your TV antenna near steel framed
housings or other metallic objects.
Install your TV antenna on high location avoiding
main roads, neon lights and electrical power
stations.
Avoid sharing your TV antenna.
(i.e. using one antenna on more than
one TV set.)
Outdoor antenna are subjected to
constant weather wear and tear.
When poor reception occurs, please
consult your dealers or qualified service
personnel.
TV ANTENNA
TV ANTENNA
FLAT ANTENNA
FLAT ANTENNA
TV TUNER
ROUND CABLE
TV ANTENNA TV ANTENNA
TV ANTENNA
TV ANTENNA
FLAT ANTENNA
FLAT ANTENNA
FLAT ANTENNA
TV TUNER
(NOT INCLUDED)
ADAPTOR
ROUND CABLE
ROUND CABLE
(NOT INCLDED)
TV ANTENNA
TV ANTENNA
FLA
ROUND CABLE
A.VHF/UHF OUTDOOR ANTENNA
B.INDEPENDENT VHF OR
INDEPENDENT UHF OUTDOOR ANTENNA
Power Connection
1. Remove power adapter from package. Connect the round end of power
adapter to the rear of the LCD TV monitor. Please refer to diagram
instructions.
2.Plug the other end of the power cord into the wall outlet and the installation
is complete.
Keep babies away
from electrical
outlets at all times to
prevent accidents
from happening!

0
0
9Start Up
Start Up
Remote Control - Put batteries into the remote Top / Front Control Panels
Recognizing buttons and controls
0
1
0
Recognizing buttons and controls
Note
1. It is dangerous to install batteries in the wrong order.
Batteries may leak and cause damage to the remote control!
2. Do not mix different brands or new and old batteries together during battery
change!
3. Never recharge batteries which are not rechargable!
4. Discard used batteries properly. Do not puncture or throw used batteries in
fire as this may cause explosions!
1 2 3 4
Remote Control: battery installation
1
Depress the battery
cover and slide out
to the direction of the
arrow indicated on
cover.
2
3
Slide battery cover
in reverse order as
indicated.
Install batteries in
correct order as
indicated.
Remote Operation
1 Aim remote directly at LCD TV monitor for clear signal.
2 Remote range is at approx. within 20 feet with angles of approx. 30 degrees.
3 Do not have obstructions between remote and TV reception.
4 Battery life span is between 6 months to one year depending on usage.
Once reception is weak, it is about time to replace batteries.
Batteries Installation Know how

0
1
1
Recognizing buttons and controls
Recognizing buttons and controls
Remote Control Buttons
Recognizing buttons and controls
0
1
2
Recognizing buttons and controls
1. DVD Previous
2. DVD Play
3. DVD Next
4. DVD Eject
5. DVD Stop
6. IR Headphone Sensor
7. TV Antenna Input
8. Headphone Input #1
9. AV Input
10. Power On/Off
11. DVD/TV/AV Switch
12. Picture Select
13. Volume Down
14. Volume Up
15. TV Channel Down
16. TV Auto Program
17. TV Channel Up
18. Surround Sound 3D
19. Headphone Input #2
20. DC 12V Input
21. DVD Video Output
22. DVD Left Audio Output
23. DVD Right Audio Output
24. External Speaker Input
14
1. TV/DVD/AUX Select
2. DVD Number Control Select
3. Numbers 0-9
4. TV/CATV Select
5. Mute
6. Picture Select
7. Volume Up/Down (+/-)
8. DVD Eject Button
9. Up/Down-Left/Right/Enter
10. DVD Menu
11. DVD Display
12. DVD Stop
13. DVD Reverse
14. DVD Forward
15. DVD Audio Select
16. DVD Subtitle Select
17. Power On/Off
18. TV Number Control Select
19. TV Channel Auto Memory
20. TV Channel Skip Search
21. TV Channel Erase Write
22. Channel Up/Down (+/-)
23. DVD Power On/Off
24. DVD Setup
25. DVD Play
26. DVD Pause
27. DVD Next
28. DVD Previous
29. DVD Repeat
30. DVD Slow Play

DVD Basic Control
0
1
4
DVD Basic Control
0
1
3
DVD Basic Control
DVD Basic Control
15
DVD Player
Basic Operation
POWER
EJECT
PLAY
PAUSE
STOP
NEXT
PREVIOUS
FORWARD SCAN
REVERSE SCAN
SLOW
UP/DOWN/LEFT/RIGHT
ENTER
NUMBERS
MENU
SUBTITLE
AUDIO
DISPLAY
SETUP
Turn the unit ON or OFF
Eject and withdraw the disc
Resume play mode
Go into the standby mode
(1 time) Stops at the present playing
point / (2 times) Stops playing
Go to the next chapter, track or scene
during playback
Go back to the preceding chapter,
track or scene during playback
Scan forward at 2, 4, 6, or 8 times normal
speed
Scan backward at 2, 4, 6, or 8 times normal
speed
Play at 1/2, 1/4, or 1/8 times speed
For Navigating the Setup Menu
Execute item or setting
For entering a password
Display the root menu of the DISC
Select the subtitle language and turn it on/off
Select the audio language
Display information about the DISC
Display the setup menu
Menu
A DVD is divided into sections called title and chapter. When you
play a DVD, a root menu of the disc will appear on the screen of
your TV or Monitor. The contents of the menu vary from disc to
disc. Press MENU (on remote) during playing to display the menu,
and press ENTER or PLAYto start playing. Some DVDs allow you
to select disc playback options using the DVD menu.
Display (The contents vary from disc to disc.)
1) Playing time and remaining time
a. During playback press DISPLAYto display the current title
number (1), the total number of titles (2), the current chapter
number (3), the total number of chapters (4), and the playing
time for the title (5). The heading will disappear automatically
in about 3 seconds.
b. Press DISPLAY
title. The heading will disappear automatically
again to display the remaining time for the

Basic Control
0
1
6
Basic Control
0
1
5Basic Control
Basic Control
c. Press DISPLAYthe 3rd time to display the elapsed time for
the chapter. The heading will disappear automatically in about
3 seconds.
d. Press DISPLAYthe 4th time to display the remaining time for
the chapter. The heading will disappear automatically in about
3 seconds.
e. Press DISPLAYthe 5th time to exit.
SUBTITLE OFF is displayed. The subtitle display will disappear
automatically if the SUBTITLE button isn’t pressed again for 3
seconds.
2) Subtitle
During play press SUBTITLEto select the subtitle language you
desire, with the current subtitle language number (1) and the
total number of subtitle languages (2) displayed. If there are
multiple languages press SUBTITLE again to select another sub-
title language. To turn subtitles off, press the subtitle button until
SUBTITLE OFF is displayed. The subtitle display will disappear
automatically if the SUBTITLE button isn’t pressed again for 3
seconds.

0
1
7Basic Control
Basic Control
Basic Control
0
1
8
Basic Control
3) Audio
During playback, press AUDIOto select the audio language you
desire, with the current audio channel number (1) and the total
number of audio channels (2) displayed. Press AUDIO again to
select another audio language. The audio display will disappear
automatically if the AUDIO button isn’t pressed again for 3 sec-
onds.
4) Repeat
a. During playback, press REPEATto repeatedly play the cur-
rent chapter.
b. During playback, press REPEATagain to repeatedly play the
current title.
c. During playback, press REPEATa 3rd time to cancel the re-
peated playing and resume normal playback. The repeat dis-
play will disappear automatically if the REPEAT button isn’t
pressed again for 3 seconds.

0
1
9SETUP Basic Control
SETUP Basic Control
SETUP Basic Control
0
2
0
Basic Control
5. Setup
Press SETUP to display the main page of the setup menu on the
screen. Press SETUP again to exit the SETUP menu and the unit
will resume playback or stop mode.
1) Select GENERALSETUPusing UP/DOWN and then press
ENTER to enter the general page.
2) When there’s no disc inside the player, select PREFERENCES
using UP/DOWN and then press ENTER to enter the prefer-
ences page.
1) Select GENERALSETUPusing UP/DOWN and then press
ENTER to enter the general page.
a. Select TV DISPLAYusing UP/DOWN, and then press RIGHT
to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
*NORMAL/PS:When the player is connected to a normal
TV, and a wide picture is shown on the full screen, with a
portion that may be cut off automatically.
*NORMAL/LB:When the player is connected to a normal TV,
and a wide picture is shown on the screen, with black strip at
both top and bottom of the screen.
*WIDE:When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.

0
2
1SETUP Basic Control
SETUP Basic Control
SETUP Basic Control
0
2
2
Basic Control
* ON: The screen will show an angle mark. (If angle option is
available)
* OFF: the screen won’t show an angle mark.
c. Select MAINPAGEusing UP/DOWN and then press ENTER
to return to the main page.
b. Select ANGLEMARKusing UP/DOWN, and then press
RIGHT to enter the submenu. Choose to show an angle mark
on the screen using UP/DOWN and then press ENTER to
confirm the setting. Press LEFT to return.
2) When there’s NODISC inside the player, select PREFERENCES
using UP/DOWN and then press ENTER to enter the prefer-
ences page.
a. Select AUDIOusing UP/DOWN, and then press RIGHT to en-
ter the submenu. Select the audio language you desire using
UP/DOWN and then press ENTER to confirm the setting.
Press LEFT to return.
21

0
2
3
SETUP Basic Control
SETUP Basic Control
SETUP Basic Control
0
2
4
SETUP Basic Control
21
b. Select SUBTITLEusing UP/DOWN, and then press RIGHT to
enter the submenu. Select the subtitle language or SUBTITLE
OFF you desire using UP/DOWN and then press ENTER to
confirm the setting. Press LEFT to return.
c. Select DISCMENU using UP/DOWN and then press RIGHT
to enter the submenu. Select the disc menu language you de-
sire using UP/DOWN and then press ENTER to confirm the
setting. Press LEFT to return.
Note: Language selection is only available for discs recorded
in the languages listed in the submenus above. If not,
the player will play and display on the screen the origi-
nal recorded language contained in the disc.
d.Select PARENTALusing UP/DOWN and then press
RIGHT to enter the submenu.
22
Select the parental level you desired using the UP/DOWN arrows
Press ENTER to enter the password verify page.
Input the 4 digit password (3308), and then press ENTER to
confirm the parental level setting.
Note: After inserting the disc in the player, if the paren-
tal setting of the player prohibits playing the disc,
the following menu will appear in the screen:
Select YES using LEFT/RIGHT and press ENTER. Then input
your password.
23

0
2
5
SETUP Basic Control
SETUP Basic Control
SETUP Basic Control
0
2
6
SETUP Basic Control
23
e. Select PASSWORDusing UP/DOWN and then press RIGHT
to enter the submenu.
Press ENTER to enter the password change page. Input the
old password or the default password, the new password,
and the confirmed new password. Press ENTER to confirm
the change.
24 24
Note: The default password is 3308 and this password is
always effective whether you’ve changed it to another
new one or not, in case that you forget the new pass-
word. To avoid others using it to set the parental level
and change the password, you may note this default
password by other means and delete it from this
manual. Some discs can be limited depending on the
age of users while some discs can not.
f. Select DEFAULTSusing UP/DOWN and then press RIGHT to
enter the submenu. Press ENTER to make the setting return
to the factory-set mode.
g. Select MAINPAGEusing UP/DOWN and then press ENTER
to return to the main page. Press SETUP to exit the MAIN
PAGE.
25

Watching TV
0
2
8
Watching TV
0
2
7System Operation
System Operation
System Operation
1.Press POWER to switch the unit on or off. The switch indica-
tor will light red and the unit will go to the mode last used and
stored in memory.
2.Press DVD/TV/AVto select your desired mode. When switch-
ing the mode, the DVD player can memorize the present play
- ing point.
3. Press VOLUME UP/DOWN to raise or lower the sound level
Also used to make picture adjustments in the picture select
mode.
4.Each time PIC is pressed, the on screen picture adjust-
ment display cycles through “adjustment bars for VOLUME,
CONTRAST, BRIGHTNESS, COLOR and TINT. Then
use VOLUME UP/DOWN to raise or lower the level. This dis-
play will automatically turn off if no adjustments are made within
about 6 seconds, or if any other button is pressed.
5.Press MUTE to cut off all sound; pressing this button again
restores sound to the previously set level. MUTE may also be
released by pressing the VOLUME UP/DOWN.
6.Press SRS 3D to activate surround sound with the indicator
on.
Watching TV
1. Plug the coaxial cable of an external antenna into the CATV
Input located on the lower left side of the unit.
2. With power applied to the system and the TV mode selected,
press TV/CATVon the remote control to select the regular 69-
channel Broadcast (TV) and the 125-Channel Cable TV
(Standard Cable (STD), HRC Cable (HRC), and IRC Cable (IRC))
(Call your local cable company to find out your cable standard)
3. Press AUTO MEMORY; all channels in TV or CATV are searched
and tuned and the channels with signals detected are automatically
stored.
4. SKIP/SEARCHselects between SKIP and SEARCH mode.
In SKIP mode, the TV only stops on channels that are pro-
grammed into memory when the CHANNEL UP/DOWN
buttons are used. When SKIP mode is off, the TV will stop
on all active channels.
5. To erase a TV channel, press ERASE/WRITEuntil MANUAL
MEMORY has “erase” displayed on the screen. To store a
TV channel, press this button until MANUAL MEMORY has
“add” displayed on the screen. The stored channel numbers
are displayed in green on the screen while the non-stored
channel numbers are in red.

0
2
9
CAR Installation
CAR Installation
CAR Installation
0
3
0
CAR Installation
Note: Detach the two speakers from the main unit, only use headphones.
1. Take the unit and the mounting bag from the storage bag.
Slide the unit into the mounting bag, fasten the buckle and
tighten the straps on the side of the mounting bag.
2. Take one of the supplied straps from the storage bag and
connect the latch to one of the top rings. Loop the strap
around the headrest. Attach the “S” hook to the other top ring
on the other side of the bag.
3. Take another strap and connect the latch to the lower ring on
the mounting bag. Attach the “S” hook to the same ring after
looping the strap around the rail located beneath the seat
track. Avoid moving parts in the seat mechanism. Repeat
this process for the other side. In some vehicles, it may be
necessary to attach the “S” connector to the rail directly, as it
may not be long enough to reach back to the ring.
4. Adjust all the straps tightly so that the bag is secure.
5. Plug one end of the cigarette lighter adapter into the DC 12V
input; then plug the other end into the cigarette lighter socket
on the dashboard.
Mounting
Bag
Top Rings
Lower Rings
Figure 1
Figure 2
1) Car installation on the back seat (Figure 1)

0
3
1
CAR Installation
Installation
CAR Installation
0
3
2
CAR Installation
Mounting
Bag
Top Rings
Lower Rings
Figure 1
Figure 2
2) Car installation between two seats(Figure 2)
Figure 2
1. Take one of the supplied straps from the storage bag and
connect the latch to the top metal ring on the mounting bag.
Wrap the strap around the base of one the headrests. Attach
the “S” hook to the same top metal ring. Repeat this process
for the other side (Passenger Seat).
2. Take another strap and connect the latch to the lower metal
ring on the back of the bag. Attach the “S” hook to the same
ring after looping the strap around the rail located beneath
the seat track. Avoid moving parts of the seat mechanism.
Repeat this process for the other side. In some vehicles, it
may be necessary to attach the “S” connector to the rail
directly, as it may not be long enough to reach back to the
ring.
3. Adjust all the straps tightly so that the bag is secure.
4. Plug one end of the cigarette lighter adapter into the DC 12V
input; then plug the other end into the cigarette lighter socket.
Note: Detach the two speakers from the main unit, only use headphones.

Troubleshooting
0
3
4
Troubleshooting
0
3
3Note
Note
Interference
Please note the following common TV reception interferences:
Ignition effect
Black spots or vertical lines may appear. Screen jumps crazily or is very unstable.
This is commonly the result of car ignition system interference, neon lights, or other
forms of electrical interferences.
Ghost Shadows
This is the result of two signals : One being the original signal from the
antenna while the 2nd signal is a slightly delayed signal, normally the result of
bouncing off tall buildings or other obstructions. This problem might be corrected by
adjusting your outdoor antenna.
Flurries
Lots of tiny dots appears on your screen. This is the result of poor reception signals.
You may have to re-enforce your antenna signals.
Playing a Video Game
Plug the AV output from your game system into the AV IN jack
on the front of the unit. You can use the attached AV cable to
convert the 3.5mm AV jack on the unit to RCA type AV jacks,
and match the color-coded jacks to the appropriate plugs:
Yellow (VIDEO) to Yellow, white (AUDIO L) to White, and Red
(AUDIO R) to Red. Select the AV mode and adjust the volume/
picture control to individual preference.
Use Headphones
1. Wireless IR Hi-Fi headphones may be used with the system.
Simply place batteries in the wireless headphones and
power them up. Make sure there is a clear line of site to the
IR Headphone Sensor.
2. Optional wired Hi-Fi headphones may be used with the
system. Simply plug in the headphone to either headphone
jack on the front of the unit. When using the right headphone
jack both internal speakers will be turned off.

Troubleshooting
0
3
6
Troubleshooting
0
3
5Troubleshooting
Troubleshooting
You may have problems that can be fixed with a few minor adjustments. Look for the type of
problem you are having below and then apply the suggestions to get your TV going again.
Picture with no sound
Check if you have accidentally pressed the "mute" button
Check other channels if the same problem exist. If other
channels are fine, then problem is with the TV program you
are viewing. This shouldn't be a concern
Verify all connections are firmly attached
Connect cable to another TV
disconnect the TV main power for 10 seconds before reinstalling it
Picture too dark
Check your brightness level
Check your contrast level
disconnect the TV main power for 10 seconds before reinstalling it
Check your LCD monitor for possible demage
Sound with no picture
Check if main power is switched on
Check brightness and contrast level to see if they have
been tuned to the minimum level thus making the screen dark
Unplug the cable and re-plug it in after two minutes
Check if you have accidentally pressed the "mute" button
Connect cable to another TV
No Picture No Sound
Check main power source
Check other TV channels. If they are okay , problem is just
with the TV program you are viewing
Press the TV/DVD/AUX button on the remote or on the front of
the unit to get to the desired display option
If you are using outdoor antenna, please check your
connections
Please check if your power cord is connected properly,
it may be loose
Switch off main power, disconnect cable. Reconnect cable
after two minutes rest then switch on the main power
Check if the antenna or cable are well connected
Check your Remote Control
Check power adapter and power cord if they have been
damaged
Connect cable to another TV
Press the TV/CATV button to verify you are setup properly (pg 28)
Remote Control Failure
Check TV main power source
Check if remote control batteries are weak
Check if batteries have been correctly installed
Check if there are obstructions between your remote control
and the main TV remote sensor
Disconnect your cable for two minutes before reinstalling it
If failure resulted from electrical interferences, lighting or
static, disconnect the TV main power for 10 seconds before
reinstalling it. Restart your TV
Try holding remote 2 inches from sensor
Picture is blurry
Check other channels. Problem may be an isolated incidence
If using outdoor antenna, please check connections
Please check your accessories. Such as V ideo recorder,
VCD, DVD
Check your cable company or outdoor antenna reception
RF signal may be too slow
If all fails, please contact our serviceman immediately

Product Specifications
0
3
8
Product Specifications
0
3
7Troubleshooting
Troubleshooting
Trouble Checks and Adjustments
TV will not turn on Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Make sure batteries are placed in the remote the right way.
Unplug TV for a few minutes and then turn it on again.
Poor sound or no sound Check volume settings and mute settings
Check for possible interference sources
Blur picture or no picture Check antenna or TV cable
Check for possible outside interferences
Check picture settings
Some channels are not clear Check outdoor antenna and make necessary adjustments
Check possible outside interferences
Poor Color tone or No color Check memory settings
Check Color settings
Check if program is in correct channel
Check antenna and cable connections
Check possible outside interferences
No reception from Cable Check if cable is connected properly
Check if channels are selected properly
Check if cable company are experiencing technical problems
Channels above 13 cannot receive CheckTV channel settings (CATV/TV) are set properly( page 28 )
Check antenna and UHF settings
Unable to operate remote Check for low batteries or possible obstructions between remote and TV sensor
Check TV main power source
TV shut off Electric power failure
TV programs ended
Before calling our serviceman, please refer to the following chart to see if you can adjust
the problems yourself.
Display Specifications:
Screen 12" (diagonal)
Aspect Ratio 4:3
Resolution 800x600
Viewing Angle H: 90 degree V: 40 degree
Contrast Ratio 180:1 (typ)
Brightness 180 cd/m2 (typ)
Backlight life 10,000 hrs (minimum)
Connection information:
Composite (RCA input)
Composite (RCA output)
(2) Headphone (Wired)
Headphone (Wireless)
NTSC TV Tuner (181 channel CATV/AIR ready)
Mechanical Dimensions:
WxHxD (W/Speakers) 16.8" x 9.9" x 3.5"
WxHxD (W/O Speakers) 11.8" x 9.9" x 3.5"
Weight 7.6lb
Power Usage:
Power source AC 110V - 240V @50/60Hz or 12V
Power input 12Vdc, 2.5A