Audiovox XMCK10AP - XM Radio Tuner User manual

-1-
Released: 9-15-05

-2-
Congratulations
Thank you for purchasing the Audiovox Xpress XM®Satellite Receiver. You are one step closer to experiencing the
latest innovation in XM®Satellite Radio. XM®Satellite Radio will revolutionize your vehicle or in-home entertain-
ment.
XM®features over 150 digital channels — 100% commercial-free music, over 30 channels of news, sports, talk
and entertainment, over 20 dedicated channels of XM®Instant Traffic & Weather, and the deepest play-list in the
industry with access to over 2 million titles!
XM®Satellite Radio service gives you the power to choose what you want to hear - wherever and whenever you want
it. XM®is America’s #1 Satellite Radio provider with over 4 million customers.
Your Audiovox Xpress XM®receiver must be used with an accessory kit, such as the Audiovox Home Kit, Boom Box
or Vehicle Kit as required by your specific installation needs. These kits are available at retailers where Audiovox
main units are sold.
Required subscription for service sold separately.
Installation costs and other fees and taxes may apply, including a one-time activation fee. All fees and program-
ming subject to change. College sports games subject to availability. Subscriptions subject to Customer Agree-
ment included with the XM Welcome Kit and available at www.xmradio.com. Only available in the 48 contiguous
United States.
©2005 XM®Satellite Radio Inc. XM®is a trademark of XM®Satellite Radio. All rights reserved. All other trade-
marks are the property of their respective owners.

-3-
Cautions and Warnings
•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
•The owner or operator shall not make any changes to the unit, antenna, or accessories, as this will void operator’s
authority to operate this equipment.
•By adhering to these warnings and safety considerations, stated in the manual and by XM7, accidents and/or personal
injury can be avoided.

-4-
TABLE OF CONTENTS
Congratulations ...................................................................................2
Cautions and Warnings.......................................................................3
TABLEOFCONTENTS .......................................................................4
TABLE OF FIGURES ..........................................................................5
XpressSYSTEMCOMPONENTS........................................................6
INTRODUCTION ................................................................................7
OPTIONALACCESSORIES ...............................................................7
GETTINGSTARTED............................................................................8
XM Activation ......................................................................................8
Controls...............................................................................................10
Receiver Control Features .................................................................10
BASICOPERATION............................................................................12
Turning Xpress ON and OFF...............................................................12
MenuOptions ......................................................................................13
FM Frequency.....................................................................................14
FM ON or OFF Feature ......................................................................14
Brightness + Contrast .........................................................................15
Audio Level .........................................................................................15
Antenna Aiming (Home Installation) ...................................................16
Direct Tune..........................................................................................17
SearchMode .......................................................................................17
ChannelSkip/Add................................................................................18
Memory Recall....................................................................................18
TuneSelect .........................................................................................19
Tune Select Erase All ..........................................................................19
Tune Select Erase Some ....................................................................19
Select By-Song ...................................................................................20
Select By Artist...................................................................................20
Stock Ticker ........................................................................................21
Add Stock ...........................................................................................21
Erase Stock ........................................................................................22
Erase All Stock ...................................................................................22
Erase Some Stock ..............................................................................23
Info Extras ..........................................................................................23
Display Screen Mode ..........................................................................24
Scrolling Display .................................................................................25
BackgroundMode................................................................................25
Set Clock ............................................................................................26
TimeZone ...........................................................................................26
12 / 24 .................................................................................................27
Savings Selection ...............................................................................27
Auto-On ...............................................................................................28
Auto-Off / Sleep Timer .......................................................................28
Set Factory Defaults ..........................................................................29
Exit Menu ............................................................................................ 30
Search Button .....................................................................................30
Memory ...............................................................................................31
Pre./Dir................................................................................................32
Turning The Xpress Unit OFF ............................................................. 33
REMOTECONTROL ...........................................................................34
Remote Control Features ...................................................................34
CARE AND CLEANING......................................................................37
TROUBLESHOOTING.........................................................................37
SPECIFICATIONS ..............................................................................38
WARRANTY .......................................................................................39

-5-
TABLE OF FIGURES
Figure 1. Your Receiver 8-Character Alphanumeric ID ......................8
Figure 2. Xpress Receiver Unit...........................................................9
Figure 3. Xpress Receiver Unit Display Screen .................................11
Figure 4. XM and Audiovox Logos Power ON Screen ........................12
Figure 5. Active Channel Screen........................................................12
Figure 6. Main Menu Screen ............................................................... 13
Figure 7. FM OFF Screen...................................................................14
Figure 8. FM Frequency Screen.........................................................14
Figure 9. Brightness and Contrast Screen .........................................15
Figure 10. Audio Level Screen ...........................................................16
Figure 11. Antenna Aiming Screen......................................................16
Figure 12. Direct Tuning Screen .........................................................17
Figure 13. Search Mode Screen ......................................................... 17
Figure 14. Skip/Add Channel Screen ..................................................18
Figure 15. Memory Recall Screen ......................................................18
Figure 16. Tune Select Screen ...........................................................19
Figure 17. Tune Select Erase All Screen ............................................19
Figure 18. Tune Select Erase Some Screen.......................................19
Figure 19. Select bySong ConfirmationScreen ..................................20
Figure 20. Select by Artist ConfirmationScreen ................................20
Figure 21. Stock Ticker Screen ..........................................................21
Figure 22. Add Stock Screen..............................................................21
Figure 23. Erase Stock Screen...........................................................22
Figure 24. Erase All Stock Screen......................................................22
Figure 25. Erase Some Stock Screen ................................................23
Figure 26. Info Extra Screen ..............................................................24
Figure 27. Display Screen ..................................................................24
Figure 28. Scrolling Display Screen ............................................... 25
Figure 29. Background Setting Screen ........................................... 25
Figure 30. Set Clock Screen Setting Time Zone ............................ 26
Figure 31. Time Zone Set Screen ................................................... 26
Figure 32. 12 / 24 Hour Selection Screen....................................... 27
Figure 33. Daylight Savings Selection Screen ............................... 27
Figure 34. Auto-On Screen ............................................................. 28
Figure 35. Auto-Off / Sleep Timer Screen ...................................... 29
Figure 36. Setting Factory Defaults Screen .................................. 29
Figure 37. Category Search Screen ............................................... 30
Figure 38. Scanning Search Screen ............................................... 30
Figure 39. Memory Selection Screens............................................ 31
Figure 40. Memory Selection Screens............................................ 31
Figure 41. Direct Channel Entry Screen......................................... 32
Figure 42. Exit Screen .................................................................... 33
Figure 43. Xpress Receiver Remote Control.................................. 34

-6-
Xpress SYSTEM COMPONENTS
Remote Control Unit
Part Number 136-4042
3 Vdc Battery for Remote,
(1) CR2032
XM7Receiver Model Xpress
Part Number 136-4040

-7-
INTRODUCTION
The Audiovox Xpress XM7unit processes the XM satellite sig-
nals received by the externally mounted antenna (purchased
separately for Home or Boom Box Kits). The Xpress XM7unit
recognizes and decodes the incoming XM program information
and provides an audio signal to your radio or other audio output
equipment.
NOTE: When installed in a vehicle, the XM signal can be
received and processed virtually anywhere as long as there
are no obvious satellite signal obstructions such as nearby
tall buildings, high terrain, parking garages or tunnels.
The Xpress XM7unit is typically installed in an accessible loca-
tion of the vehicle (dash area), consistent with line-of-sight
operation of the remote control, and/or within easy reach of the
driver. For home use, situate the Xpress XM7unit close to your
stereo receiving equipment.
OPTIONAL ACCESSORIES
oAudiovox Home Kit: Part Number XMH-10
oAudiovox Boom Box: Part Number XMB-10
oAudiovox 2nd Vehicle Kit: Part Number XMC-10
oAudiovox FM Direct Adaptor: PartNumber XMFM-1
oAudiovox RCA Cables: PartNumber SATRCA

-8-
GETTING STARTED
XMActivation
Activating your XM7radio service is easy. You have one of
two choices to activate your service: Online or by Phone.
Online Activation Process
First, please make sure the Xpress XM7unit is working prop-
erly by tuning to the XM7Preview channel (#1). If you can hear
XM7Preview, your equipment is ready. NOTE: The antenna
must be installed on the outside of your vehicle for best perfor-
mance.
Next, make sure you have a credit card and your XM7Radio
Hardware ID handy. You can display your ID by tuning your
XM7Radio to channel ‘0’, one down from XM7Preview (For
tuning instructions see the Receiver Control Features section of
this guide.)
To obtain the XM7identification (ID) number, tune to channel 0
and press the Rotary/Select Knob. The 8-character alphanu-
meric XM7ID will appear on the screen. Write the alphanumeric
ID below (Figure 1) for future reference.
NOTE: No adjustments are allowed in this mode. To exit the
Radio ID screen, tune to any channel by turning the rotary knob
and press.
Please check your 8-character alphanumeric XM7ID code care-
fully. There is no “I” (eye), “o” (oh), “S” or “F” used. You may wish
to double-check your ID code on the outside of your tuner box.
Enter the ID code below:
Figure 1. Your Receiver 8-character alphanumeric ID

-9-
Online Activation Process Once the ID code is obtained, log
on to XM7at http://activate.xmradio.com and follow the easy
instructions to activate your Xpress XM7unit.
Call-in Activation Process
Call XM7at 1-800-XM RADIO (1-800-967-2346). One of XM7’s
friendly Customer Care representatives will take the necessary
information and walk you through the activation process. After
the activation form is submitted you should keep your receiver
ON for at least 1 hour. This will complete the activation process.
When the Xpress XM7unit is activated, you will be able to ac-
cess over 150 digital radio channels.
The Audiovox Xpress XM7unit provides 7 control buttons, 1
Rotary/Select Knob and 10 number keys.
ROTARY /
SELECT
KNOB
LCD
DISPLAY
POWER / IR
EYE BUTTON
PRESET/DIRECT
BUTTON
MEMORY
BUTTON
DISPLAY
BUTTON SEARCH
BUTTON
MENU
BUTTON
JUMP
BUTTON
PRESET KEYPAD
(NUMBER) BUTTON
Figure 2. Xpress Receiver Unit

-10-
Controls
Receiver Control Features
Display Button - This button allows the user to choose one of
four (4) different formats to present the Artist, Song Title and
data service information on the LCD screen.
Search Button - This button allows the user to search the
next channel category as well as between preset channels or
perform a continuous search. The continuous search will scan
all available channels in all categories or all channels within a
Preset group stopping at each one for four (4) seconds until the
user presses the search button again to make a selection.
Menu Button - The MENU button is used to access
“Menu Options” which allows the user to make feature func-
tion adjustments for personal preferences. Upon entering the
main menu mode, use the Rotary/Select Knob or the Remote
Control UP and DOWN buttons to highlight the desired function
and then press the Rotary/Select Knob or press the (XM) Se-
lect Button on the Remote Control to enter.
Rotary/Select Knob – The Rotary/Select Knob is the primary
control for navigating through the various lists and option menus
available. This knob has a dual purpose. In the default mode,
this knob provides sequential tuning through the available pro-
gram channels. When the knob is turned in a clockwise (CW)
direction the unit tunes up one channel at a time. When the knob
is turned in a counter clockwise (CCW) direction the unit tunes
down one channel at a time. When in the list or menu mode,
turning the knob (CW) and (CCW) scrolls UP and DOWN through
the various menus and lists. The current selection from the list
will be highlighted on the display. When the item is highlighted,
press the Rotary/Select Knob to enter the selection.
Power Button - This button applies power to and removes
power from the Xpress XM7unit. This button is also the Xpress
XM7unit’s receiver eye (IR).
Memory Button (mem.) - This button allows the user to
capture and store the current program data information (Artist
& Song Title). You can store up to 20 Artist/Song Title combina-
tions.

-11-
Jump Button – This button allows the user to jump to the
Previous Channel (i.e., switch between the current and previ-
ous channel.
Preset/Direct Button (pre./dir.) - Each momentary press of
the PRESET button allows the user to switch between (3) banks
of Channel presets (10 presets each A, B, and C) plus Direct
channel entry. When in any of the three preset banks, momen-
tarily pressing any of the number buttons will recall the stored
channel. In the Direct (Dir) mode, use the number buttons to
directly enter the desired channel number followed by pressing
the Rotary/ Select Knob.
Keypad Buttons 0-9 - These buttons are used to directly enter
a desired channel number. They are also used when entering
and recalling preset channel numbers into memory.
Display Screen Features - Shown to the right is an example
of an active Display Screen (see Figure 3). Pressing the DIS-
PLAY button from the Default display switches between the
artist name/song title screen, artist name/song title with stock
screen, artist name/song title with sports screen, or large letter
format. When the letter size changes, the field will scroll. This
feature is useful when viewing the display at a distance.
Signal
Strength
Channel
Number
Artist
Channel
Name
Momentary Preset Indicator
(Stays on for 2-seconds)
Time
Song
Title
Stock, Sports,
and More Info
Figure 3. Xpress Receiver Unit Display Screen

-12-
BASIC OPERATION
With the Xpress XM7unit properly installed, activated and con-
nected to your home/vehicle audio system or boom box, pro-
ceed as follows:
Turning Xpress ON and OFF
Set up your Audiovox Xpress XM7unit using the installation
instructions included in this Kit (Home Kit, or Boom Box Kit), or
with the help of a professional installer.
NOTE: Refer to Antenna Aiming during the installation pro-
cedure.
Press the Power button to turn the unit ON. When the unit turns
ON the XM7logo will appear for 3-seconds (curved lines on
either side of the XM7logo gradually appear) (see Figure 4)
followed by the Audiovox logo. These screens will be followed
by the active channel (see Figure 5), which defaults to the last
tuned channel setting prior to power being turned OFF. When
the unit is shut OFF the XM logo will appear and the curved lines
on either side of the XM7logo gradually disappear.
NOTE: If this is the first time using the Xpress XM7unit, the
screen will alternately display the preview channel screen and
a number of messages, including: “Activate Your XM71-800-
XM RADIO”. If not, go to channel 1 using the Rotary/Select
Knob on the Xpress XM7unit or the CH Up/Down buttons on
the remote control.
Figure 4. XM and Audiovox Logo Power ON Screen
Figure 5. Active Channel Screen

-13-
Menu Options
To enter the Menu Options page, press the MENU Button on
either the remote control or the main unit. The Main Menu list will
appear on the screen (see Figure 6). Using the Rotary/Select
Knob, highlight the option you wish to adjust turning (CW) scrolls
DOWN and (CCW) will scroll UP through the various menus and
lists. The current selection from the list will be highlighted on the
display. When the item is highlighted, press the Rotary/Select
Knob to enter the adjust mode.
The following options are available:
•FMFrequency
•Brightness + Contrast
•Audio Level
•Antenna Aiming
•DirectTune
•SearchMode
•Channel Skip/Add
•Memory Recall
•TuneSelect7
•StockTicker
•Info Extras
•DisplayScreen Mode
•Set Clock
•Auto-On
•Auto-Off / Sleep Timer
•SetFactory Defaults
•-ExitMenu-
While in the menu screen function, if a button is not pressed
within 12-seconds from the previously selected function, the
unit exits the menu screen function and reverts to the default
screen display.
NOTE:Upon setting and confirmation of a Menu selection,
pressing the Menu button will exit the Xpress XM7unit to the
active screen (See Figure 5).
Figure 6. Main Menu Screen

-14-
FM Frequency
The following Frequency Setting adjustments are possible:
NOTE:The Xpress XM7unit has an internal wireless FM trans-
mitter, which allows you to play the audio through any standard
FM receiver, eliminating the need for hardwire connections. In
certain urban areas of the country where strong FM stations
may overpower the Xpress XM7unit FM transmitted signal, an
FM direct adapter may be needed to achieve a clean audio
signal (Part Number XMFM-1)
FM ON or OFF Feature
This feature allows the user to turn the FM Transmitter ON or
OFF. It is recommended that you turn the FM Transmitter OFF if
you are using the low level audio outputs in your particular
application (optional cable needed SAT-RCA) (see Figure 7).
Upon entering the “FM Frequency” mode the FM transmitter will
be OFF by default. To turn the FM Transmitter ON, turn the
Rotary/Select knob CW/CCW or use the UP and DOWN buttons
on the Remote Control to the highlight the desired frequency
(88.1, 88.3, 88.5,.......107.9).
Figure 7. FM OFF Screen
The selected frequency must be an unused frequency or a
frequency used by a low powered FM station in your area. If
not, the strong signal from the FM station may overpower the
Xpress XM7 unit FM transmitted signal which may result in
interference.
With the FM Frequency highlighted, press the Rotary/Select
Knob or the (XM) Select button on the remote control to confirm
the selection (see Figure 8).
Figure 8. FM Frequency Screen

-15-
Brightness + Contrast
This feature allows the user to adjust the brightness and con-
trast of the unit’s display (see Figure 9).Upon entering either the
brightness or contrast adjustment mode, a horizontal bar graph
is displayed with a minus (-) sign on the left and a plus (+) on the
right. Use the Rotary/Select Knob to highlight the contrast or the
brightness adjustment. Once the desired adjustment is high-
lighted, press the Rotary/Select Knob to enter the adjustment
mode. If there is no activity for 12 seconds, the unit will exit to
active channel screen.
Brightness mode: Turn the Rotary/Select Knob CW or use the
UP arrow on the Remote Control to increase the screen’s bright-
ness. Turn the Rotary/Select Knob CCW or use the DOWN ar-
row on the Remote Control to decrease the screen’s brightness.
Once the desired setting is obtained, press the menu button
twice to return to the active channel screen.
Contrast Mode: Turn the Rotary/Select Knob CW or use the UP
arrow on the Remote Control to increase the screen’s contrast.
Turn the Rotary/Select Knob CCW or use the DOWN arrow on
the Remote Control to decrease the screen’s contrast. Once the
desired setting is obtained, press the menu button twice to return
to the active channel screen.
Figure 9. Brightness and Contrast Screen
Audio Level
This feature allows the user to set the audio output signal level
(see Figure 10). Upon entering the audio level mode, a horizon-
tal bar graph is displayed with a minus (-) sign on the left and a
plus (+) on the right. Use the Rotary/Select Knob to adjust the
audio level. When the Rotary/Select Knob is turned CW the
audio level signal is increased. When the Rotary/Select Knob is
turned CCW the audio level signal is decreased. The UP and
DOWN buttons on the Remote Control also provide a similar
function. When the desired setting is achieved, press the Ro-
tary/Select Knob or (XM) Select Button on the Remote Control to
confirm.
NOTE: When the Receiver is to be used in battery-operated
accessories, such as the Xpress Boom Box (XMB10),
to maximize battery life, it is suggested that the bright-
ness setting be reduced to a minimal level.

-16-
NOTE: To prevent distortion caused by overdriving the audio
playback device input, it is recommended that you adjust the
audio level signal to mid-range.
Figure 10. Audio Level Screen
Antenna Aiming (Home Installation)
This feature allows the user to aim the antenna to optimize XM7
signal reception (see Figure 11). Upon entering the antenna aim-
ing mode, a horizontal bar graph is displayed with a minus (-)
sign on the left and a plus (+) on the right. The horizontal bar
graphs represent the repeater signal and satellite transmission
signal strength. Position the antenna to optimize either the satel-
lite or terrestrial signal. When the optimal setting is achieved,
press the Menu button on the unit or the Menu on the Remote
Control to exit this screen and to return to the main menu.
NOTE: When the Antenna Aiming screen is selected, this
screen does not time-out like the other menu screens.
This screen will stay active until the Menu Button is
pressed again.
Weak Strong
Satellite Signal
Level
Terrestrial Signal
Level
Figure 11. Antenna Aiming Screen
Screen displayed when a
FM Transmitter is set to
“ON”.
Screen displayed when the
FM Frequency is set to OFF

-17-
Direct Tune
Turn the Rotary/Select Knob CW or CCW to highlight choice (Di-
rect Tune On or Direct Tune Off). When the desired setting is
highlighted, press the Rotary/Select Knob or the (XM) Select
Button on the remote control to confirm (see Figure 12). The
direct tune function when enabled (ON), allows the user to manu-
ally tune to a station using the Rotary/Select Knob or the remote
control UP and DOWN buttons. The unit will automatically switch
to the selected station without pressing the Rotary/Select Knob
or the (XM) Select Button on the remote control. When direct
tune is set to off, this allows the user to manually tune to a station
usingthe Rotary/SelectKnob ortheremote controlUP andDOWN
buttons. The Rotary/Select Knob or the (XM) Select Button on
the remote control must be pressed to confirm the selection.
Figure 12. Direct Tuning Screen
Search Mode
This feature allows the user to change the way the search
button on the Xpress XM7unit functions. The Search button can
be set to search categories, to scan through all presets (A, B, C)
or all available channels.
Upon entering this mode, two options are displayed “Search by
Category” and “Search by Scanning” (see Figure 13). Use the
Rotary/Select Knob or the UP and DOWN buttons on the Remote
Control to switch between the options. When the desired setting
is highlighted, press the Rotary/Select Knob or the XM Select
button on the Remote Control to make the selection. Once a
selection is made a screen will appear to confirm the selection
“Search by Category” or “Search by Scanning Set”.
Figure 13. Search Mode Screen

-18-
Channel Skip/Add
The Channel Skip/Add function provides the ability to skip over
certain channels when using the Rotary/Select Knob or the UP
and DOWN buttons on the Remote Control. Upon entering this
mode, a channel list is displayed with the current channel in play
highlighted (see Figure 14). In front of each channel is a plus
sign (+) signifying that the channel is not skipped or a minus sign
(-) signifying the channel is skipped. Rotate the Rotary/Select
Knob to navigate the list and highlight the channel to be adjusted.
Once a channel has been highlighted, pressing the Rotary/Select
Knob changes the plus sign (+) or the minus sign (-) to the
opposite sign and adds/subtracts the channel from the channel
skip list. To exit to the active channel screen press the menu
button twice.
Figure 14. Skip/Add Channel Screen
Memory Recall
This feature allows the user to capture and store the current
program data information (Artist & Song title) with up to 20 list-
ings (20 Artist/Song Title combinations) (see Figure 15).
Press and release the memory (mem) button to save the informa-
tion of the current broadcast song or program. The Xpress XM7
unit can hold up to 20 entries, after which any new information
that is saved will replace the oldest entry in memory. To recall
saved information, press and hold the memory (mem) button for
3-seconds. The Xpress XM7unit will provide a continuous view
of the Channels, Songs and artists held in memory. Rotating the
Rotary/Select Knob counterclockwise will access the previous
memory content or clockwise to access the next memory con-
tent. The UP and DOWN buttons on the Remote Control also
provide a similar function. To exit to the activate channel screen
press the menu button twice, press the jump button twice or
wait 12 sec.
Figure 15. Memory Recall Screen
PRESS XM BUTTON TO SKIP
ABC News & Talk
+129 Bloomgberg New
CNBC
127 Weather Channel
- 124
+125
+

-19-
Figure 16. Tune Select Screen
This feature allows the user to store current program information
(Artist and Song title) for future comparison against the incoming
XM7signal. The Xpress XM7unit can hold up to 20 entries, after
which any new information saved will replace the oldest entry in
memory.
To store a song or artist, press and hold the Rotary/Select Knob or
the (XM) Select Button on the remote control until the unit emits a
confirmation tone. When the exact Artist or Song is detected on
the XM7broadcast, the user will be notified via a confirmation
tone. An alert will also appear on the screen for approximately 8-
sec identifying that a match was found. Pressing the Rotary/
Select Knob or the (XM) Select Button on the remote control while
this screen is active forces the unit to jump to the station currently
playing desired Artist or Song.
Tune Select Erase All
To delete all songs from the Tune Select list go to menu options
then use the Rotary/Select Knob or the UP and DOWN buttons on
the remote control to choose
Figure 17. Tune Select Erase All Screen
Tune Select Erase Some
To delete individual and multiple artists/song titles from the Tune
Select list use the Rotary/Select Knob or the UP and DOWN
buttons on the remote control to choose the Artist name or Song
title (see Figure 18). Press the Rotary/Select Knob or the (XM)
Select Button on the remote to mark the Artist or Song title for
removal from the Tune Select list.
Press menu to delete marked items and exit the mode.
Figure 18. Tune Select Erase Some Screen
TUNE SELECT
“Yes or No” (see Figure 17). Press the Rotary/Select Knob or the
(XM) Select Button on the remote control to confirm the selection.

-20-
Select By-Song
This feature enables the Xpress XM7unit to search incoming
XM7broadcast for stored content by song title. Use the Rotary/
Select Knob or the UP and DOWN buttons on the remote control
and select the “Select by Song”. Press the Rotary/Select Knob
or the (XM) Select Button on the remote to confirm the selection
(see Figure 19).
Figure 19. Select by Song Confirmation Screen
Select By Artist
This feature enables the Xpress XM7unit to search incoming
XM7broadcast stored content by artist title. Use the Rotary/
Select Knob or the remote control up down buttons and select
the “Select by Artist”. Press the Rotary/Select Knob or the (XM)
Select Button on the remote to confirm the selection (see Figure
20).
Figure 20. Select by Artist Confirmation Screen