Audiovox KLV3913 - 12" 720p LCD TV/DVD Combo User manual

OWNER’S MANUAL
1
R
Model: KLV3913
12” Kitchen LCD HDTV / DVD Combo
Need More Help?
Please visit online help at
http://www.1800customersupport.com/audiovox
BESOIN D'AIDE ? APPELEZ LE SERVICE À LA CLIENTÈLE AU 1-800-645-4994
OU VISITEZ NOTRE SITE WWW.AUDIOVOX.COM
TM

- 1 -
SAFETY PRECAUTIONS
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence
ofuninsulated"dangerousvoltage"within
the product's enclosure that may be of
sufficientmagnitudetoconstituteariskof
electric shock to persons.
The exclamation point within the
equilateral triangle is intended to alert the
usertothepresenceofimportantoperating
and maintenance (servicing) instructions
in this owner’s manual.
The following marks and symbols are located on
back of the unit.
On Placement
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth,
or by placing it on carpeting.
On Safety
• WhenconnectingordisconnectingtheACpowercord,griptheplugandnotthecorditself.Pullingthecord
may damage it and create a hazard.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as
vases, shall be placed on the apparatus.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside
the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand
for 1 to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before
use.
Caution marking is located on back enclosure of the unit.
WARNING:TOREDUCETHERISKOFFIREOR
ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUGTO WIDE SLOT OF WALL OUTLET,
THEN FULLY INSERT.
The symbol for Class
(Double lnsulation)
This product contains a
low power laser device.
CAUTION
INVISIBLE LASER RADIATION IS
EMITTED WHEN OPENED AND
INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM

- 2 -
SAFETY PRECAUTIONS
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material
without permission.
ApparatusClaimsof U.S.PatentNos.6,836,549;6,381,747;7,050,698;6,516,132;and5,583,936licensedfor
limited viewing uses only.
ThisproductincorporatescopyrightprotectiontechnologythatisprotectedbyU.S.patentsandotherintellectual
propertyrights.Useofthiscopyright protectiontechnology mustbeauthorizedbyMacrovision,andisintended
forhomeandotherlimitedviewingusesonlyunlessotherwiseauthorizedbyMacrovision. Reverseengineering
or disassembly is prohibited.
WARNING: Should any trouble occur, disconnect the AC power cord and refer servicing to a
qualified technician.
FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Shielded cables must be used with this unit to ensure compliance with the Class FCC limits.
Warnings:
• The mains plug is used as disconnect device and it should remain readily operable during intended used.
Inordertodisconnecttheapparatusfromthemainscompletely,themainplugshouldbedisconnectedfrom
the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.
• Theventilationshouldnotbeimpededbycoveringtheventilationopeningswithitemssuchasnewspaper,
table-cloths, curtains, etc.
• The use of apparatus in moderate climates.

- 3 -
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Portable CartWarning

- 4 -
TABLE OF CONTENTS
Repeat Playback .................................................... 19
DVD Programmable Memory ................................ 20
DVD Programmable Memory........................... 20
ViewingJPEG FILes ............................................... 20
Play Modes for CD or JPEG Disc .......................... 21
Customizingthe FunctionSettings ................. 22-23
Language ......................................................... 22
Video ................................................................ 22
Default .............................................................. 23
UsingtheTV ........................................................... 24
TVSetup ............................................................ 25-27
Listening to the Radio ............................................ 28
TroubleshootingGuide ........................................... 29
Maintenance ........................................................... 30
Specifications ........................................................ 30
LimitedWarranty.................................................... 30
Safety Precautions .............................................. 1-2
Important Safety Instructions ................................. 3
Table of Contents ..................................................... 4
Disc Formats ............................................................ 5
Accessories ............................................................. 6
Remote Control ........................................................ 6
Control Reference Guide .....................................7 - 9
MountingInstructions ....................................... 10-11
Connections ...................................................... 12-13
Connecting theTV Antenna .............................. 12
Connecting the Unit to aTV or
otherVideo Equipment ..................................... 12
Connecting the AM LOOP Antenna and FM Wire
Antenna ............................................................ 12
Plugging in the Unit .......................................... 13
MonitorOperation .................................................. 13
Unit Operation ........................................................ 14
SoundSystem ........................................................ 14
Setting the Clock .................................................... 15
Setting the CookingTimer ..................................... 15
Playing a Disc ................................................... 16-18
Playing a Disc .................................................. 16
Pausing Playback............................................. 16
Stopping Playback............................................ 16
Skipping to a Different Chapter/Track ............... 16
Fast Forward/Fast Reverse ............................... 16
Angle Selection ................................................ 17
Subtitle Selection.............................................. 17
Audio Selection ................................................ 17
Display Function............................................... 18
SpecialFunctions................................................... 18
Locating a SpecificTitle/Chapter/Time.............. 18
Locating a Specific Track .................................. 18
Setting Favorite Bookmark During Playback..... 19

- 5 -
The unit can play
Region Management Information
Region Management Information: This unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVDs. If the region number printed on the DVD does not
correspond to the region number of this unit, this unit cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that is Not Available
When the “ ” symbol appears on the screen, it indicates that the function or operation attempted is not
availableatthat time. This occurs because the DVD manufacturer determinesthespecificfunctions.Certain
functions may not be available on some discs. Be sure to read the documentation provided with the DVD.
Titles, Chapters and Tracks
• DVDs are divided into “titles” and “chapters”. If the disc
has more than one movie on it, each movie would be a
separate “title”. “Chapters” are sections of titles.
• Audio CDs are divided into “tracks”. A “track” is usually
one song on an Audio CD.
Icons Used on DVDs
Sample lcons Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
Note:
• When playing a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic
images will not be shown.
DISC FORMATS
Notes on Unauthorized Discs
You may not be able to play back some DVDs on this unit if they were purchased from outside your
geographic area or made for business purposes.
Note : Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded
on them, but some do not.
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc]
Compatible

- 6 -
ACCESSORIES
Please Check and Identify the Included Accessories.
Remote control ............................................................................................................................. x 1
AAA 1.5V battery .......................................................................................................................... x 2
Mounting template ......................................................................................................................... x 1
1.06" (27mm) spacers .................................................................................................................. x 4
.57" (14.4mm) spacers ................................................................................................................. x 4
.32" (8.2mm) spacers ................................................................................................................... x 4
#M 5 x 69 mm screws .................................................................................................................... x 4
#M 5 x 40 mm screws ................................................................................................................... x 4
FM wire antenna ........................................................................................................................... x 1
AM LOOP antenna ........................................................................................................................ x 1
Battery Replacement
Whenthe batteries become weak, the operating distance of the remote control is greatly reduced and you will
need to replace them.
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Notes:
• Do not place the remote control near magnetic devices or magnetic cards.
• If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion
damage caused by battery leakage.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Weak batteries can leak and severely damage the remote control.
• WARNING: Do not dispose of batteries in a fire. Batteries may explode or leak.
To Install Batteries
1. Open the battery door. 2. Insert two AAA batteries.
REMOTE CONTROL
Using the Remote Control
• This remote control is magnetic and can be attached to most refrigerators. Some refrigerators panels
are not metallic. In this case, try attaching the magnetic remote control to the side of the refrigerator.
• Point the remote control at the REMOTE SENSOR located on the unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may
be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
CAUTION: When discarding batteries, environmental problems must be considered and local rules or laws
governing the disposal of these batteries must be strictly followed.

- 7 -
CONTROL REFERENCE GUIDE
Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
123
654
789
0
PICTURE
LAST CH
EXIT
DVD MENU
STOP
BAND
SOUND
FORMAT
MTS
MUTE
TV MENU
RETURN
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
FUNCTION Button
Use to select DVD, TV or RADIO mode.
PICTURE Button
Selects from preset screen display
settings to match the type of show you
are watching.
MEMORY Button
Sets title/chapter in a favorite order.
Enter the number of a selected station.
•[dot] Button
Press to enter digital sub-channels (i.e.
11.3, 12.7).
EXIT/RETURN Button
Press to exit the TV menu and return
directly to normal viewing.
DVD MENU Button
Press to enter the main menu of the
DVD you are watching.
VOLUME (+/-) Buttons
Adjusts the volume.
/ TUNING Buttons
: Fast reverse playback.
: Fast forward playback.
TUNING : Scans all available
radio stations.
PREV Button
Selects previous titles, chapters or
tracks on a disc.
ANGLE Button
During DVD playback, switch the
camera angle of the video presentation
when scenes with multiple camera
angles are recorded on a DVD.
GOTO Button
Goes directly to a location on a DVD/
CD.
AUDIO Button
Selects audio soundtracks of a DVD or
change the output mode of a CD.
MTS Button
Press to select MONO sound,
STEREO sound or Secondary Audio
Program (SAP).
FORMAT Button
Press to select the picture format.

- 8 -
CONTROL REFERENCE GUIDE
Remote Control
13
14
16
17
18
19
20
21
22
23
24
123
654
789
0
PICTURE
LAST CH
EXIT
DVD MENU
STOP
BAND
SOUND
FORMAT
MTS
MUTE
15
TV MENU
RETURN
STANDBY/ON Button
Turns on the unit and puts it in standby
mode.
Number (0-9) Buttons
LAST CH Button
Press to switch repeatedly between the
last two channels displayed.
TV MENU Button
Press to display the on-screen TV
menu.
CURSOR ( , , , ) Buttons
Use to highlight selections on a screen
and make adjustments to certain
settings.
CH+ / CH- buttons
Use to change TV channels.
ENTER Button
Confirm selections on a menu screen.
MUTE Button
Press to turn off the sound.
STOP/BAND Button
Stops playback.
Switches between AM and FM.
PLAY Button
Starts playback.
PAUSE Button
Pauses playback, frames advance.
NEXT Button
Selects next titles, chapters or tracks
on a disc.
SOUND Button
Press to select from preset sound
settings to match the type of show you
are watching.
SUBTITLE Button
Selects one of the subtitle languages
programmed on a DVD.
SETUP Button
Enters and exits the SETUP menu of
the DVD.
REPEAT Button
Repeats chapter or title of a DVD.
Repeats single track or whole CD.
DISPLAY Button
Changes disc status information
displayed on the screen.
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)

- 9 -
CONTROL REFERENCE GUIDE
1) Disc Tray
Opens or closes the tray by pressing OPEN/
CLOSE button.
Place a disc on the disc tray, label side up.
2) Display Window
Displays system information.
3) POWER ON Indicators
DVD : DVD indicator
TV : TV indicator
RADIO : RADIO indicator
4) Remote Sensor
Receives the remote control unit signals.
5) ON/OFF Button
Turns the unit on and off.
6) OPEN/CLOSE Button
Use to open/close the disc tray.
7) TV MENU Button
Opens and closes the TV menu.
8) ENTER Button
Use to enter the sub-menu and confirm
selections in TV mode.
9) SET CLOCK Button
Use to set the current time.
10) DVD/TV/RADIO Button
Use to select DVD, TV or RADIO mode.
11) TIMER Button
Use to set the cooking timer.
12) PREV/ NEXT/ ADJUST Buttons
PREV Button
Press to go back to previous chapters/
tracks.
NEXT Button
Press to advance to chapters / tracks.
ADJUST Buttons
Makes adjustments to certain settings.
Use to search for a station automatically or
select presetted stations.
13) CH Buttons
Use to skip/search TV channel.
14) PLAY Button
Press to start or resume playback of a disc.
15) / BAND (AM/FM) Button
Stops playing a disc.
Switches between AM and FM.
16) VOLUME +/- Buttons
Adjusts the volume levels.
17) Screen
Unit
12
34567812
10 13
11
17
914 15 16

- 10 -
MOUNTING INSTRUCTIONS
b)Fold the MountingTemplate along the guideline
that is closest to the thickness of your cabinet
overhang.
c)Tape Mounting Template to the underside of
the cabinet with the folded portion of the
MountingTemplate flush up against the cabinet
overhang (see Figure 2). Go to STEP 2.
If your cabinet DOES have an overhang:
a)Measure the thickness of the cabinet overhang
(see Figure 1).
STEP 1
If your cabinet does NOT have an overhang:
a)Place the Mounting Template in the desired
location inside or underneath the cabinet
(whichever has less obstructions, and will be
easier for you to reach to drill holes), flush
with the front edge of the cabinet and tape it
down. Go to STEP 2.
STEP 2
Use an electric drill with a ¼” drill bit (not included)
to drill all four holes marked on the Mounting
Template (see Figure 3).To reduce splintering, place
a small piece of masking tape over each hole
location before drilling. Go to STEP 3.
If your cabinet DOES have an overhang:
a) Eight screws are included with this unit, but you
will only need four of them. Select the screw
length which will go completely through your
cabinet bottom, and extend at least 3/8" past
the bottom of your cabinet overhang.
b) This unit includes three sets of four spacers of
various lengths. The spacers can be put
together to form longer spacers to
accommodate various cabinet overhang
thicknesses. Determine the best combination
of spacers which is equal to or longer than the
cabinet overhang thickness.
c)Hold the unit up against the bottom of the
cabinet, and align the four holes on the top of
the unit with the screws. Partially tighten each
screw, but do not fully tighten the screws until
all of them have been started.
d)Gently tighten each screw until they are firmly
holding the unit in place.
(Continued on next page)
STEP 3
If your cabinet does NOT have an overhang:
a)Eight screws are included with this unit, but
you will only need four of them. Select the
screw length which will go completely through
your cabinet bottom, and provide at least 3/8"
of thread to screw into the main unit.
b)Insert the four selected screws through each
hole from the inside of the cabinet going down
(see Figure4).
Cabinet Bottom
Front
edge
Figure 1
Figure 3
Cabinet Bottom
Front
edge
Template
Figure 2
Figure 4
TOOLS NEEDED: 1) Electric drill with 1/4” bit; 2) Phillips-head (cross style) screwdriver.

- 11 -
e) Partially tighten each screw, but do not fully
tighten the screws until all of them have been
started (see Figure 6).
f) Gently tighten each screw until they are firmly
holding the unit in place. The top front edge of
the unit should clear the overhang.
MOUNTING SUGGESTIONS
1) If your cabinet has obstructions inside it which prevent you from using the template, cut out the
corresponding area on the template, but do NOT cut out or through the screw holes.
2) If your cabinet has obstructions underneath it, which will interfere with the mounting of the unit, remove
the obstruction before mounting the unit, or find another location to mount the unit.
3) It is recommended that you wear safety glasses while drilling to prevent eye injuries.
4) For wood cabinets, you may want to mark the hole locations with a nail, pressed gently but firmly into
the wood so that a slight impression is made.This will also help keep the drill bit centered in the right
location.
5) Hold the drill firmly against the cabinet to keep the drill from “walking”.
(Continued from previous page)
c) Insert the four selected screws through each
hole from the inside of the cabinet going down
(see Figure 5).
MOUNTING INSTRUCTIONS
Figure 5
Figure 6
d) Hold each screw head down and push the unit
and spacers onto the screws, then hold the
unit up until spacers are firmly against the
bottom of the cabinet (and fully nested within
each other if you are using multiple spacers
for each screw).
TO REDUCE THE RISK OF FIRE, DO NOT PLACE ANY HEATING OR COOKING
APPARATUS BENEATH THIS UNIT.
CAUTION

- 12 -
CONNECTIONS
Connecting theTV Antenna
Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal.
Connecting the Unit to aTV or otherVideo Equipment
Use the Video cable (not supplied). Connect the VIDEO OUT on the rear of the unit to the VIDEO IN on
your TV or other video equipment.
1
2TV antenna
To the TV ANT
IN terminal
Video cable (not supplied)
(yellow)
TV or otherVideo
Equipment
VIDEO
IN
Connecting the AM LOOP Antenna and FMWire Antenna
Connect the AM LOOP antenna (included) to the AM LOOP ANT terminal and the FM wire antenna
(included) to the FM ANT terminal.
FM: Fully unwind the antenna wire and position it for the best reception.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.

- 13 -
MONITOR OPERATION
Follow the illustrations below to open the monitor.
1.Gently pull the monitor down from the back, and twist it clockwise so the screen is visible.
2.The screen can be turned up to 270o. Do NOT force the screen once it stops turning.The screen
does NOT turn completely around.
CONNECTIONS
Plugging in the Unit
Plug the AC power cord into the wall outlet
a) Before plugging in the power cord, make sure the voltage of the unit matches your local voltage.
b) Plug the power cord directly into the nearest wall outlet, and wrap the remaining cord around the cord
storage knob at the rear of the unit.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
To AC outlet
AC power cord

- 14 -
UNIT OPERATION
Turning the Unit On
While the power cord is connected and the unit is on standby, power will be consumed and only the clock
display will flash.
Dolby Digital (for DVD)
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can
reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-
channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-
channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
‘Dolby’ and the double-D symbol are trademarks of Dolby Laboratories.
SOUND SYSTEM
• Press the ON/OFF button to turn the unit on and the DVD indicator lights up.
After a short period of time, “DVD” will appear on the front display and the DVD logo (start-up picture) will
appear on the screen.
• Press the DVD/TV/RADIO button (the FUNCTION button on the remote control) to TV mode and the TV
indicator lights up.
After a short period of time,“TV” will appear on the front panel display and theTV program will begin on the
screen.
• Press the DVD/TV/RADIO button (the FUNCTION button on the remote control) to RADIO mode and the
radio indicator lights up.
After a short period of time, “TUNER” and the FM frequency will appear on the front panel display.

- 15 -
SETTING THE CLOCK
To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is
plugged in, but not turned on.
• Check that the rated voltage of the unit matches your local voltage.
4. Press the / buttons to set the current
minutes then press the SET CLOCK button
once to start the clock.
1. When the AC power cord is plugged in, the
clock display will blink.
SETTING THE COOKING TIMER
1. Press the TIMER button.The “TIMER” indicator
appears and the cooking time “10” blinks.
2. Press the / buttons to select your
desired time from 1-99 minutes.
• Press the TIMER button repeatedly to select
time: 10, 15, 30, 45, 60, 75, 90 minutes.
• Press and hold the / buttons to fast
forward/reverse the cooking time.
4. To turn OFF the ALARM, press the TIMER
button once. Otherwise, the ALARM will
automaticallyturn off after 60minutes if no button
is pressed.
CANCELLINGTHE COOKINGTIMER
• Press the TIMER button until the time of the cooking timer shows "OFF". The “TIMER” indicator will
disappear.
3. When the preset time elapses, the ALARM will
sound.
3. Press the / buttons to set the current
hours then press the SET CLOCK button once
to confirm. Then, the MINUTE blinks.
2. Press the SET CLOCK button until the HOUR
blinks.

- 16 -
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in
a manner that allows specific or limited operation during playback. Such as, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instruction
notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not
permitted by the unit or disc.
Playing a Disc
1. Press the ON/OFF button to turn on the unit.
2. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 22 to 23) before proceeding to step 3.
3. Press the OPEN/CLOSE button. The disc tray opens.
4. Place a disc onto the disc tray with the label side up.
5. Press the OPEN/CLOSE button. The disc tray closes.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of the DVD or start playback of the disc.
6. If the unit does not automatically start playing the DVD, press the PLAY button.
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To resume normal playback, press the PLAY button.
Each time you press the PAUSE button, the picture advances one frame.
Stopping Playback
Press the button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the PLAY button.
If you press the button twice, the unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
Skipping to a Different Chapter/Track
• Press the button repeatedly to skip to the start of the current or previous chapter/track.
• Press the button to skip to the next chapter/track.
• For an audio CD, use the number buttons (remote control only) to go directly to that track number.
Fast Forward/Fast Reverse
1. Press the TUNING or TUNING button on the remote control when a disc is playing.
• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time the TUNING or TUNING button is pressed, the speed
of fast scan changes in the following sequence:
PLAYING A DISC
2. Press the PLAY button when you have reached the desired point to resume playback at normal
speed.
Notes:
• The DVD player mutes sound during reverse and forward scan of DVD video discs.
• The fast playback speed may differ depending on the disc.
• When MUTE is pressed, the sound is mute and the “L O”
indicator always blinks on the LCD display until MUTE is
pressed again or VOL is pressed.

- 17 -
PLAYING A DISC
Angle Selection
Some DVDs contain scenes which have been shot from a number of different angles. For these discs,
the same scene can be viewed from each of these different angles.
1. While you are playing a DVD with different angles
recorded, press the ANGLE button to view the num-
ber of current angles available.
2. Press the ANGLE button repeatedly to change the
scene to the next angle in those recorded.
• About two seconds later, playback continues from
the new angle selected.
• If no button is pressed within 10 seconds, playback
continues without changing the current angle.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been
recorded.
• If only one angle is recorded, “ ” is displayed.
Sequence of angle shots
(Example)
Notes:
• If only one language is recorded, the language does not change.
• About two seconds later, playback continues with the new subtitle selected.
• The number of languages recorded differs depending on the disc.
• If no button is pressed within a few seconds, playback continues without changing the current subtitle.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• On some DVDs, subtitles are activated from the main menu of the DVD. Press the DVD MENU button
to activate the main menu.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as
shown in the example below.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language.
Notes:
• If only one audio format is recorded, the number does not change.
• Some DVD discs allow you to change audio selections only via the disc menu. If this is the case,
press the DVD MENU button and choose the appropriate language on the disc menu.
• You can select different audio channels (Left, Right, Mix or Stereo) on an audio CD by pressing the
AUDIO button repeatedly.
Audio Selection
On some discs, the sound is recorded in two or more formats. Follow the directions below to select the
type of playback.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.

- 18 -
SPECIAL FUNCTION
PLAYING A DISC
Locating a Specific Title/Chapter/Time
If a DVD contains title/chapter/time numbers, you can locate a specific title/chapter/time by directly
selecting a title/chapter/time number.
1. Press the GOTO button to display Title.
2. Press the or button on the remote to select the option (Title,
Chapter or Time) then press the corresponding number button(s)
for the Title/Chapter/Time you want.
3. Press the ENTER button to confirm. The unit will start playback
about 3 seconds later.
Locating a Specific Track
If a CD contains track numbers, you can locate a specific track by directly selecting track number.
1. Press the GOTO button.
2. Press the or button on the remote to select the option (Track,
Time or Disc Time) then press the corresponding number button(s)
for the Track/Time/Disc time you want.
3. Press the ENTER button to confirm. The unit will start playback
about 3 seconds later.
Notes:
• If the time numbers you entered is not permited by the DVD, after you press the ENTER button, it will
restore to “- - : - - : - -”. You should re-enter correct numbers.
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD.
Display Function
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display information
on operation status.
Time: The elapsed time from the beginning of the title
which is currently playing.
Title/Chapter: The number of the title/chapter currently playing
and total titles/chapter on disc.
Audio: The type of the audio currently selected is
displayed.
Subtitle: The subtitle number and language currently
selected is displayed. When a disc with only one
subtitle is played back, “ ” is displayed.
Angle: The current angle is displayed. When a disc with
onlyoneangleisplayedback,“ ”isdisplayed.

- 19 -
Setting Favorite Bookmarks During Playback
While a disc is playing, you can mark the desired scene.
1. Press the GOTO button until Bookmark1 appears.
2. Press the ENTER button to mark the desired scene and the time of
this point will be shown in Bookmark1.
3. Press the ENTER button to play the favorite bookmark.
To Set Other Bookmarks
1. Press the GOTO button until Bookmark1 appears, then use the
or button on the remote to select Bookmark2/Bookmark3.
2. Press the ENTER button.
Notes:
• Some discs may not work with marking operation.
• The marking is cancelled when you open the disc tray or turn the unit off.
SPECIAL FUNCTION
You can play a specific title or chapter repeatedly.
Repeating a Chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on
the screen. The current chapter is played repeatedly.
To Resume Normal Playback
3. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on the
screen.
Repeating a Title
You can play the same title repeatedly.
2. While the disc is playing, press the REPEAT DISC button until the “ ” indicator displays on
the screen. The current title is played repeatedly.
Repeating a Whole Disc
2. While the disc is playing, press the REPEAT DISC button on the remote control until the “ ”
indicator displays on the screen. The whole disc is played repeatedly.
To Resume Normal Playback
3. Press the REPEAT DISC button until the “ ” indicator
displays on the screen.
You can play a single track or whole disc repeatedly.
Repeating a Single Track
You can play the same track repeatedly.
1. While the disc is playing, press the REPEAT DISC button on the remote control until the “ ”
indicator displays on the screen. The current track is played repeatedly.
You can play a single track or the entire CD repeatedly through the
Toolkit which appears on the right in the window.
Whilethediscisplaying,usethe and buttonsontheremotetoselect
"Repeat", then press the ENTER button to select Single/All/Off.
Single: Repeat the current track.
All: Repeat the entire CD.
Off: Resume normal playback
REPEAT PLAYBACK