AUN X5 User manual

SMART PROJECTOR
Operating Manual

First of all, thank you very
much for using our products!
Please read this instruction
carefully before use, which can
help you get familiar with this
product quickly.
If there is any typographical error
or translation error, we hope that the
majority of users understand, when
the content is changed, without prior
notice.

Interface Key Diagram······················1
Power on/Off ··································3
Definition·······································4
Main Interface·································4
Bluetooth Settings·····························5
WI-FI Settings·································6
File Manager···································7
Video Display···································7
HD input·········································8
Mobile phone screen··························9
Application install/uninstall················10
Language Settings····························11
Factory Data Reset···························12
Announcements·······························13
Directory

1
1 Interface Key Diagram

2

3
2Power on/off
①Boot:
A.Press "power switch" to start the machine
B.Press the remote control "switch" to start the machine
②Turn off：
A.Press the "power switch" of the host to prompt whether
to shut down. Press the "Power switch" again to shut down
the machine
B.Press the remote control "switch" to indicate whether to

4
shut down, then press the "switch" to shut down
Adjust the sharpness of image display by "focus +" and
"focus -" buttons of remote control
3 Definition
4 Main Interface

5
Main interface →"Bluetooth Settings" Click the
Bluetooth switch to search for the device that needs to be
linked and pair it up
5 Bluetooth Settings
6 WI-FI Settings

6
On the home page →"Network Settings" →"WiFi
Settings" click the WiFi switch to search for the device to
be linked to, enter the password, click the link, and conduct
pairing
WiFi hotspot Setting
Home page →"Network Settings" Click "WiFi Hotspot"
to set the WiFi hotspot and open and close it
Projector "USB1" "USB2" can be connected to the USB
flash disk, home page →"file manager" opened after the
file play and read operations
7 File Manager
8 Video Display

7
HDMI video
Start mode:
On the home page, click Signal Source and select HDMI.
Connection mode:
Connect one end of the HD data cable to the HD input
interface of the projector and the other end to the HD output
interface of other devices.
Bluetooth audio
Start mode:
On the home page, click Signal Source and select Bluetooth
Mode.
Connection mode:
The connected device should search for the Bluetooth name
"ProjectorBT" emitted by the projector and click the
9 High-definition input

8
connection
Method 1:
Download the app (applicable to
Android/iPhone/iPad/Windows)
1)The phone and the projector are connected to the same
network, or if there is no network, the phone connect a
convenient projector hotspot(Refer to 6 for hotspot setting
method)
2)Enter the application "EShareServer" on the projector and
follow the prompt steps.
10 Mobile phone screen
11 Application Install/Uninstall

9
1)The application opens; the downloaded APK can enter
"So application"
2)Application not downloaded: You can download and
install it in the "App Store" app that comes with the
projector or choose other channels by yourself
3)Application uninstallation: "Main page" →"Application
Settings" select the APK to be uninstalled, and then click
→"Uninstall"

10
Select the main display language in "Main Page" →
"Language Setting"→"Language Setting" to confirm.
In "Main Page"→"System Upgrade"→"Restore Factory",
select OK and wait for the factory settings to be restored
12 Language Settings
13 Factory Data Reset

11
◎Please make sure to use a standard power adapter, other
adapters may affect the projector cause serious damage.
◎Please keep the lens clean. Dirty or scratches will affect
the projection effect. Before cleaning the projector, please
disconnect the power first, wipe with clean fiber cotton or
soft leather cloth with dripping water, and then wipe off the
residual moisture with a dry cloth.
◎Do not place or drop objects on the projector.
◎Do not put the projector on your legs or any part of your
body to prevent the heat from causing discomfort or injury.
◎Do not use it in liquid or exposed to rain, and do not use
it under thunderstorms.
14 Announcements