Aura MaxiVac 114HW User manual

Cleaning System
WaterFall
User Manual
TechnoVac
Model
114RW
Model
114HW
StillVac
Model
114IW
Cleaning System
WaterFall

Dear Customer,
Thank you for choosing our product. We hope that Aura Vacuum Cleaner
and Shampooers, which have been manufactured in modern facilities and
under high-quality standards, will provide the best solution for your needs.
Please read the entire user manual thoroughly and keep it for future
reference.
114HW   1000 Watt 1950 mmSS 220 - 240 V AC, 50/60 Hz 200m3/h
1 - 1,5 L/sec. 26W 2,5 bar 7 L 8,5 L 12,7 kg IPX4 II
114IW  - 1000 Watt 1950 mmSS
220 - 240 V AC, 50/60 Hz 200m3/h
1 - 1,5 L/sec. - - - 6 L 8,4 kg IPX4 II
114RW   1000 Watt 1950 mmSS
220 - 240 V AC, 50/60 Hz 200m3/h
1 - 1,5 L/sec. 26W 2,5 bar 3,5 L 6 L 10,8 kg IPX4 II
MaxiVac TechnoVac StillVac
Model Wet/Dry Vacuum Washing Function Motor Power (max) Vacuum Voltage / Frequency Air Flow Water Suction Rate Pump Power Pump Pressure Fresh Water Tank Capacity Dirty Water Tank Capacity Weight IP Code Protection Class

3
Please Read Before Using The Product!
• This device is designed only for domestic use.
• Before plugging your device in, check that the mains electricity is suitable
for the voltage specified on the technical information label.
• No grounding is required as your device is fully insulated. You can safely
use it in a groundless socket.
• Before operating the device, be sure to check the device or power cord
for damage. If there is any damage, do not operate your device and contact
your nearest Aura Authorized Service.
• Do not leave the device plugged in when it is not in use. Turn off your
device before unplugging. When removing the plug from the socket, do not
pull the plug by the cable.
• Your device is equipped with an automatic cable winding mechanism.
(114HW-114RW) Do not force the cable to push in, do not use it
unnecessarily and do not let your children use it as a toy.
• Do not pull or carry the device by its power cable. Do not allow the cable
to be caught by a door. Keep power cable away from sharp edges and hot
surfaces.
• Power cord should be checked regularly for damages. The device should
not be used with a damaged cable. If the power cord is damaged, it must
be replaced by an equivalent cord or cord set available from its manufacturer
or service agent. This operation must be done by an authorized service.
• Do not vacuum burning, smoking or smoldering things like cigarettes,
matches or hot ashes. Never use your device to clean flammable liquids
such as gasoline, alcohol, fuels, or where these substances may be found.
• Never use your device to clean the oil, soot, chimney dust, ceramic powder,
lime dust, gypsum dust, or to cleaning fireplaces.
• Never use your device to clean volatile and toxic substances or near these
substances.
• Always unplug your device before starting maintenance and cleaning.
• The appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Do not allow your device to be used by children as a toy or to be operated
by children without supervision. Children should be supervised to ensure
they do not play with the device.
• Do not try to repair the device after malfunctioning or any other situation
you may suspect. Please contact the Authorized Service.

4
Accessories
Setting up and using the device
Shampooer Parts (114HW, 114RW)
Fresh Water Tank
Hose Clamp
Hard Floor
Rubber
Carpet Washing
Nozzle
Washing Set
Tube
Upholstery
Washing Nozzle
Vacuuming Partst
Filter Cover
Daily Cleaning
Nozzle
Elliptical Brush
Telescopic Tube
Suction Group Filter Slot
Sponge Filter
Suction Hose
• After unpacking your device, open the latches that secure the
upper body and lower body sections. (Picture 1)
• Separate the upper body from the lower body and place it safely
on the ground.
Crevive Tool Air Outlet Filter

5
Washing function
Washing function is available in 114HW and 114RW models.
ATTENTION!
Surfaces to be washed must thoroughly
vacuumed first.
• After making the device ready, insert the dust suction hose into the
inlet at the front of the device by pressing its latches. (Picture 8)
• After attaching the telescopic tube to the hose (Picture 9), attach
the desired washing nozzle to the end of the telescopic tube.
(Picture 10)
• To wash hard floors, attach the hard surface washing rubber to the
large washing apparatus. (Picture 11)
Picture 1 Picture 2 Picture 3
Picture 5 Picture 6 Picture 7
Picture 4
• Make sure that the plastic suction piece is correctly attached to
the lower body before you start using the cleaner. (Picture 2)
• Place the sponge filter (Picture 3) first, and then the filter holder
(Picture 4) on the upper body of the device. Then turn the filter cover
half a turn clockwise to lock it. (Picture 5)
• Fill the tank with clean water up to the water level indicated on
the plastic suction part. Place the upper body on the lower body and
close the locking latches.
• Your device is ready to use, you can plug it in and start it.
Wet / Dry sweeping and liquid vacuuming
• Place the head of the hose in the socket located at the front of
the device. (Picture 6)
• Place the telescopic tube in to the handle (Picture 7). You can
attach any accessory on the end of the tube for dry or wet cleaning.
• Start your device by pressing the on/off switch at the top.
( )

6
• Attach cleaning water spray trigger to the handle by pressing it.
(Picture 12)
• Insert the long end of the water pipe into the check valve connection
on front of the machine (Picture 13) and the other end into the sprayer
on the washing nozzle. (Picture 14) Attach the pipe to the suction
hose and telescopic tube with the help of clamps. (Picture 15)
• After installing the accessories, attach the water tank on the back
of your device. Ensure that the tank is properly aligned before sliding
tank in place (Picture 16). Pour water into the clean water tank
(Picture 17). It can be cold or warm water up to 30 degrees, but hot
water should never be used.
• Add the carpet washing shampoo that comes with your product to
the water tank as much as the amount written on the bottle.
(Picture 18)
• Make sure the filter is attached to the end of the water hose that
enters the tank. Using without a filter can damage the water pump.
Malfunctions that may occur due to this reason are not considered
under warranty. In order for the device pump to last long, the filter
should be cleaned frequently.
• Insert water pipe assembly into tank. Attach loose end of the pipe
to water inlet port (Picture 19).
• To start the washing process, press the washing switch on the
device to start the water pump and press the trigger to spray the
solution onto the surface.
• Slowly pull the telescopic tube towards you as you continue spraying
the solution. Repeat over the same area 3 times or until there is no
more dirt visibly entering the nozzle from the carpet.
• Once satisfied with cleaning, repeat the process without spraying
solution for further drying until no more liquid is passing through the
attachment.
( )
WARNING: After shampooing the carpet, the shampooed
water left in the device must be cleaned. Otherwise, the
solution remaining in the device may cause the pump to
malfunction. Therefore, after each use, pour the remaining
solution in the tank and add some fresh water to the tank.
Start the water pump by pressing the washing switch on
the device and rinse the system by spraying the clean water
for a while.
( )
WARNING: The ballcock system in the device will
automatically stop vacuuming when the dirty water tank
reaches its maximum capacity. In this case, the engine

• We strongly recommend that you use Aura carpet washing
shampoo in your product. You can obtain Aura carpet washing
shampoo from authorized services.
• Other shampoos, cleaning chemicals, foaming liquid or powder
detergents may damage your device.
• Never run the pump when the water tank is empty.
• If the water in the tank runs out while the pump is running, turn off
the water pump immediately.
• Repeat the cleaning process a few times for very dirty carpets and
upholstery.
• Before using your washed items such as carpets, sofas, etc., let
them dry for about two hours.
7
Washing process warnings and precautions
Picture 12 Picture 13 Picture 14 Picture 15
Picture 17
Picture 16 Picture 19Picture 18
Picture 8 Picture 9 Picture 10 Picture 11
( )
Cleaning and maintenance
• Turn your device on/off and pump switches to “0”
position and unplug it.
• Disconnect all pipes and the hose. If the carpet washing function
is used, lift the end of the hose before disconnecting to allow fluids
in the hose flow into the dirty water tank.
( )
continues to run, but your device does not vacuum. Turn off
your device from the switch and drain the water in the
dirty water tank to continue cleaning.
( )

• Unclip and remove the motor unit. Tilt the unit 90 degrees as
shown in (Picture 20), drain the remaining water into the
reservoir. Emty dirty water, rinse the reservoir thoroughly, wipe
with a cloth and allow to dry completely before storage.
• Unscrew the filter cover by turning it 90 degrees anticlockwise
(Picture 21) and remove the filter holder (Picture 22) and
sponge filter (Picture 23). In addition, remove the suction part
(Picture 24) from the reservoir, wash it and replace it.
• Remove, wash and rinse all the parts and accessories (except
filters that cannot be wet) thoroughly and allow them to dry
completely after every usage.
• To clean the hose, flush running hot tap water through it and
allow to dry completely before using again and storage. You can
also clean the hose by vacuuming up some clean water from a
bucket while set-up for wet vacuuming.
Picture 20 Picture 21 Picture 22
Picture 23 Picture 24
Complies with the WEEE Directive.
This symbol on the product or package indicates that the appliance is
not to be discarded with usual household waste. It should be elivered
to the collection points for the recycling of electrical and electronic
devices. You shall contribute to the protection of nature and human
health when you dispose of this product correctly. Improper disposal
may harm the environment and human health. You can get more
information on the recycling of this product from your municipality,
waste collection service or the store where you purchased this
product.
BOSB Mermerciler Sanayi Sitesi 7. Cad. No: 14 34524 Beylikdüzü / İSTANBUL
Tel: [phone] / Faks: [phone] / www.iea.com.tr - [email protected]
788024ZEN