Auralex Acoustics H8SSL-i Instruction sheet

Thank you for purchasing pArtScience™ SpaceArray™, the next generation of acoustical treatments from Auralex®
Acoustics. Designed by Russ Berger, pArtScience SpaceArray diffusors evenly and randomly disperse sound waves
to provide a consistent acoustical environment in any room. Unlike other high-end diffusors, the SpaceArray employs
a quasi-random array using state of-the-art engineering techniques, and carefully selected, high-quality materials for
superior sound diffusion.
HOutstanding Performance: Eliminates flutter echoes and other acoustical anomalies without removing acoustical energy
from the space.
HQuasi-Random Array: Randomization of reflections evenly distributes sound in a space, taking the guesswork out of microphone
placement and mixing. It just sounds better!
HModular: 2’ by 2’ panels used in a variety of applications and placement options, including “T-Bar” grids.
HEasy Installation: Strong and lightweight, can be mounted in minutes on the wall or ceiling.
HBeautiful Solid Wood Construction: Widely used for musical instruments and decorative finishes for over 1000 years,
Paulownia wood has one of the highest strength-to-weight ratios of any wood in the world.
Most spaces can benefit from the introduction of properly designed and located diffusion; only the quantity and placement varies.
Diffusion has been successfully implemented in studios, control rooms, concert halls, gymnasiums, meeting rooms, sanctuaries,
and more. The proper balance of diffusive and absorptive surfaces varies with room size and function, so your dealer or Auralex
representative will be glad to assist you in choosing the proper type and quantity of diffusors and can advise you as to the best
location for the devices in your particular space.
Feel free to contact an Auralex Application Specialist via email at [e-mail] or call 1-800-95-WEDGE. For best
results, fill out a Personalized Room Analysis Form (http://www.auralex.com/pcf/) before calling so the application specialist
can properly assist you.
756-1005 | Rev. 3 | 030706 EDL
SpaceArrays™ SpaceCouplers™
AudioTile™ Shockwave™
Thank you for Purchasing Auralex®Total Sound Control®Products
Installation Guidelines
Auralex®pArtScience™ Products:
For additional Auralex® Total Sound Control®products
Visit www.Auralex.com

The SpaceArray drops into place easily in any 2’ x 2’ ceiling grid system. To install a grid system, please refer to the
manufacturers installation instructions.
Wall Mounting Components:
(4) Paulownia Wood
Well Covers
(4) Foam Spacers
Tools Needed
1Drill
43” or 4” Wood Screws
1Screwdriver
1Carpenters Level
➊
Position
SpaceArray in
desired location.
Use a level if
needed.
Mark the location
for pilot holes.
➋ ➌
Attach Foam Spacers to
wall using screws.
Caution: Do not overtighten.
Drill pilot holes at
marked location
from Step 1.
➎
Insert Paulownia wood well covers
to hide the screw holes.
TIP
Do not force well cover into well. If necessary, sand the
well cover edges to ensure a proper fit.
➍
Position SpaceArray in proper
location over Foam Spacers.
Press firmly into place.
CAUTION
The SpaceArray is made from Paulownia wood. It is fragile
and should be handled like any musical instrument.
SpaceArray™Wall Mounting
SpaceArray™Dropped Ceiling T-Bar Grid Mounting