Aurender FLOW User manual

USB 3.0 or 2.0 cable
Camera Kit
volume
headphone jack
power button
menu
move up
play/pause
move down
USB
optical in
FLOW
Quick Start Guide
2. Using an iPhone or iPad
* To listen to high resolution files exceeding 16/44.1kHz, a proper third party program is required.
FLOW
3. Using an Android Phone
OTG cable
2. Using with iPhone / iPad
3. Using with Android Phone
4. Using with Mac or Windows PC
TM
® ®
® ®
5. Package Contents
1. Aurender FLOW
* Playback controls may not work
depending on the software being
used.
USB 3.0 cable Apple Camera Kit
(Not Included)
OTG cable
1.
* mSATA external storage is not supported when used with iOS devices.
* To listen to high resolution files exceeding 16/44.1kHz, a proper third party program is required.
FLOW Quick Start Guide : 1504_01

USB 3.0 cable
4. Using a Mac or Windows PC
* After connecting Flow to a Windows PC, download and install the driver
(www.aurender.com/page/download) before using Flow.
No drivers are needed for Mac PCs.
When using Flow with a PC, it will turn on automatically when connected to the
PC. Use your media player to play music, adjust the volume and enjoy.
The default volume is set to -90dB. Whenever the headphone jack is unplugged,
the volume will be reset to -90dB. The volume control will only work when the
headphone jack is plugged.
If there is no sound, please check to see that Flow is set as the output device
on your PC.
•For Mac PCs, please refer to the screenshot [Picture 1].
•For Windows PCs, please refer to the screenshot [Picture 2].
•Turn up the volume gradually, until you start to hear music.
For most headphones, you should start hearing music at around
or over -60dB.
For more detailed instructions, specifications and drivers, please refer to
our website at www.aurender.com
[ Picture 1] OSX (10.9 or later) [ Picture 2 ] Windows 7
Android is a trademark of Google Inc.
iPhone, iPad, and Mac are trademarks of Apple Inc.
Windows is a registered trademark of MicrosoftCorporation.
5. Package Contents
Aurender FLOW Main Unit
USB 3.0 Cable OTG Cable Optical Cable
Stereo RCA Cable
Battery Charger
Leather Carrying Case
Quick Start Guide
USB 3.0 cable
Screwdriver
* For fast file transfer from Mac/PC to mSATA drive(optional) inside the FLOW,
USB 3.0 cable is recommended. For music playback, USB 2.0 cable can also be used.
* Please use the screwdriver included when you open the back cover of the unit. It is only used when
you want to insert the mSATA drive(separate purchase). It is not recommended for other usages.
* DC Adapter included will vary depends on the countries
1/4 inch(6.3 mm)
to 3.5mm Stereo
Plug-in Adapter