Auroras SolarWrap User manual
Contact US
USER
MANUAL
Modular brackets should be tight enough by fasten 6pcs of screws in modular brackets.
Materials in Package
Connection of
Vertical Solar Street Light
Required Tools
1: Master-module 2: Sub-module 3: MC4 Adapter
5: M8 Set Screws
4: Fixing Holder
Qty : 1 Pc Qty : 1 Pc Qty : 1 Pair
(30 cm)
MC4 Adapter
Qty : 2 Pairs
Qty : 12 Pcs
Plug in
connection
Remark:
1 : All MC4 male connector ( including master and sub modules) are positive 18/36V+.
And all MC4 female connector are negative 18/36V-
2 : The type of MC4 connectors at two sides of MASTER MODULE are exactly same.
That is to say: you can use either of two sides to connect to solar light head or other device in the
same way as using regular solar panel.
3 : MC4 adapters (30cm) must be used between two solar cylinders. (VERY IMPORTANT)
4 : The MC4 connectors with RED cables are to connect master-module and sub-module
5 : All the connection between master module and sub-module should be connected to each other including
the last module of system
6: VERY IMPORTANT :
DO NOT CONNECT the MC4 male and female connector of the LAST MASTER MODULE.
Just leave them there or cut the connectors off.
Electric Allen Wrench
for M8 set screws
or
Allen Wrench
for M8 set screws
MC4 Male connector
MC4 Female connector
Plug in
connection
Plug in
connection
Plug in
connection
MC4 Adapter MUST BE ADOPTED between two up and down modules.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
（）
17
18
19
20
www.auroraslighting.com
+86 0756 8530887 +86 0756 8500385
+86 180 2307 5361
2nd Building, 639# Huayu road, Zhuhai 519000, P.R.C
AURORAS INNOTECH (GUANGDONG) CO., LTD
Visit our website
