Aus Electronics Direct AA6608 User manual

1
HDMI 1*2+2 Splitter Extender
USER MANUAL
1.Description
The HDMI extender provides extension of HDMI signals long distances over a single CAT6 cable,
transform one channel input to 2 channels output and 2 channels loopout, it supports high
resolution up to 1080p . The extender can use for a wide range of applications requiring long
distance transmission of high resolution with high quality by its good stability and powerful
security.
2.Features
Transmits 1 HDMI video and audio signals up to 50M over a single CAT6 cable;
Support video resolution up to 1920*1080@60Hz, 3D signal;
Transform one channel HDMI input to 2 channels Cat6 signal output and 2 channels
loopout;
Support EDID copy function, can match many kinds of display device;
Support POC function;
Compliance with HDMI 1.3 and HDCP 1.2 standard;
High compatibility, can auto-match source and display device;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Easy to install, plug and play;
3.Package list
HDMI Transmitter
HDMI Receive
Power supply
User manual
Foot Pad
1 pcs
2 pcs
1 pcs
1 pcs
4 pcs

2
4.Specifications
Parameter
Description
Video
Standards
HDMI 1.3; HDCP 1.2
Maximum pixel clock
165MHz
Maximum data rate
6.75Gbps
Resolution
Max 1920X1080@60Hz
Connector
HDMI-A
Impedance
100Ω
Ethernet
Interface
RJ45
Transmission distance
CAT6---50M
Other
Power supply
The power adapter: DC 12V/1A
Power dissipation
MAX 6W
Temperature
Operating: -5℃~ +70℃
Humidity
Operating: 5% ~ 90%
Dimension
TX:150*71*23mm/RX:81*45*23
The warranty
1 year free warranty
5.Panel
Transmitter

3
Receiver
Port name
Description
HDMI IN/ HDMI OUT
HDMI signal input/ output
UTP
RJ45 network interface
EDID
send the HDMI IN at the TV access, long press EDID button for 3
seconds, status indicator light flashing, completed copy EDID.
EQ
EQ automatic adjust. When the video is not clear or unstable, it
can be adjusted automatically through the EQ button
DC 12V
Power adapter socket
LED indicator
Description
STATUS/ STA
Video signal indicator
POWER/ PWR
System power indicator
6.Installation
1、Connect the provided DC 12V/1A power supplies to the power socket of the transmitter and the
receiver,
2、Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port
of the video source,
3、Connect the HDMI output port of receiver to the display device with HDMI cable,
4、Connect the transmitter RJ45 port to the receiver RJ45 port by a single CAT6 cable.

4
7.Diagram
8. Warranty
Please keep the user manual in a place where safety and easy to find so that you can read it
immediately when meet problems.
safety instruction:
Please do not disassemble this product by yourself because it doesn't including DIY function.
Please don't make the product touch water in case damaged, because it is Not waterproof
design.
Please use dry cloth material when clean the product surface.
Please do not use this product in the environment of too wet or too high temperature.
Please avoid contact with corrosive substances.
When there is damage or other physical damage to the product, please stop using and contact
with customer service to get support.