AUSounds AU-Stream Hybrid User manual

STREAM HYBRID
USER MANUAL
Manuel d'utilisation | Manual
Manuale d'uso | Benutzer-Handbücher
Manual de Usuario | 사용 매뉴얼
使用手册 | 取扱説明書

Ausounds Intelligence, LLC.
15300 Ventura Blvd., Suite 214
Sherman Oaks, California 91403, USA
www.ausounds.com
Designed by Ausounds in California | Made in China
ConçuparAusoinds,Californie,fabriquéenChine
ProjetadopelaAusoundsnaCalifórnia|FabricadonaChina
ProgettatodaAusoundsinCalifornia,prodottoinCina
EntworfenvonAusoundsofCalifornia,hergestelltinChina
DiseñadaporAusoundsenCalifornia|HechaenChina
California의Ausounds회사가디자인,중국제조
由California的Ausounds公司设计，中国制造
カリフォルニアのAusounds社より設計、中国産

Charging Cable
Earbuds Charging Case
Thank you for purchasing the AU-Stream Hybrid Active Noise
Canceling Earbuds. Please read this user manual carefully before
using this product, and keep it for future reference.
Ausounds AU-Stream Hybrid earbuds were designed with music
enthusiast and creators in mind. The 9.2mm high performance
AU-Titanium Driver and Hybrid Active Noise Cancellation provide
an accurate soundstage while also reducing distracting ambient
sounds. The AU-Stream Hybrid is extremely transparent and
dynamic with a frequency range of 20Hz - 20KHz. 25 hours total
battery life with Rapid Wireless Charging means you’ll never miss
a beat. Other key features such as Bluetooth® 5.0 with Smart
Pairing and an IPX5 waterproof rating make the AU-Stream Hybrid
earbuds the ideal high-quality audio solution.
CONTENTS
Please check if the following parts in the package are complete.
Ear Tips

PRODUCT DETAILS
Please charge for 1 hour prior to the first use.
Touch Control Panel
LED Charing Indicator
USB-C Charging Port
LED Indicator

LISTENING COMFORT
Select the right size ear tip
Positioning your earbuds
Select the ear tip that provides the most comfortable fit and audio
seal. Lightly pull the ear tip to remove it from the earbuds, and
install a new suitable ear tip.
Lightly insert the earbuds into the ear and and rotate it for a
comfortable fit. There is a left side and a right side earbud as
indicated by the L and R markers on them.

BLUETOOTH FEATURES
Automatic connection
The AU-Stream Hybrid stores your last connected device in
memory. If your earbuds are disconnected due to being out of
range, they will automatically reconnect once in range. If it is
disconnected for more than 30 minutes, select the Bluetooth name
in your device to connect again. If it is disconnected for more than
2 hours, it will automatically shut down.
Automatically switch between left and right ear
Removing either the left or right earbud from the charging case will
switch the mode to single ear state and only play audio through the
remaining active earbud.
Reset
Remove the earbuds from the charging case, then press and hold
both touch panels for 8 seconds at the same time to clear the
pairing record and enter pairing mode. (Andriod devices vary by
system)

CHARGING
Battery life
Please charge for 1 hour prior to first use. In Bluetooth mode only,
a single play can last up to 9 hours, and the total battery life can
reach 25 hours with charging case.
Earbuds
Put the earbuds in the charging case and they will automatically
shut down and enter the charging state.
Charging case
When the battery power for the case is completely depleted,
remove the earbuds from the case and allow the case to charge for
15 minutes before charging the earbuds within the case.

Right Ear
PLAYBACK CONTROLS
Touch Control
Left Ear
Answer call
Decline incoming/End call
Play/Pause
Previous/Next track
ANC mode toggle
Activate voice assisstant
Enter pairing mode
Tap
Tap and hold 2 sec
Tap
Tap 2 times
Tap and hold 3 sec
Tap 3 times
Tap and hold 8 sec
Tap
Tap and hold 2 sec
Tap
Tap 2 times
Tap and hold 3 sec
Tap 3 times
Tap and hold 8 sec

SPECIFICATIONS
Bluetooth Version
Bluetooth Protocol
Bluetooth Range
ANC Depth
Driver Type
Driver Size
Impedance
Frequency Range
SPL
Battery Life (total)
Battery Capacity (earbud)
Charging Time
Weight (earbud)
Waterproof level
BT 5.0
SBC, AAC
10m | 32ft
25db
Titanium Dynamic Driver
9.2mm
32 ohms
20Hz-20kHz
100dB
25 Hours
50mAh
1.5 Hours
6.5g
IPTX5

SAFETY INSTRUCTIONS
• Do not attempt to make any modifications to the product, including removing or
modifying the product, as the damage is not covered by the warranty.
• Do not place the product in extremely high or low ambient temperatures for
extended periods of time. Extreme temperatures can cause equipment to
deform, and reduce the charging capacity of the device.
• Thunderstorm weather may affect the normal use of the product and there is a
risk of electric shock, so please do not use the earphones outside during
thunderstorms.
• This product contains small parts. Do not swallow it to avoid danger. Keep the
product out of the reach of children.
• Using the product for a long time at high volume may affect your hearing,
please control the volume.
• If this product supports active noise cancellation. Please do not turn this
function on when walking, driving, or cycling to avoid accidents.
BATTERY WARNING
This product contains lithium battery, please do not disassemble, impact, squeeze
or put into fire. Please do not place the product under high temperature or hot sun,
beware of explosion. If there is swelling, leakage, odor or any other abnormality in
the battery compartment of the product, do not continue to use it. Please dispose
of used batteries properly in accordance with local regulations.
WARNING
Do not subject the product to excessive shock. If your product has touch sensor,
do not apply stickers or other adhesive items to the touch sensor control panel. Be
careful not to catch your finger in the unit when folding. The Bluetooth function
may not work with a mobile phone, depending on the signal conditions and the
surrounding environment. Do not apply weight or pressure to the product for long
periods, including when it is stored, as it may cause deformation. If you experience

discomfort while using the product, stop using it immediately. If this product has
earpads/ ear tips they may be damaged or deteriorate with long-term use and
storage.
CLEANING THE UNIT
When the outside of the product is dirty, clean it by wiping with a soft dry cloth. If the
product is particularly dirty, soak a cloth in a dilute solution of neutral detergent, and
wring it well before wiping. Do not use solvents such as thinner, benzene, or alcohol,
as they may damage the surface.
DO NOT USE THE HEADSET NEAR MEDICAL DEVICES
This product has magnets which may interfere with pacemakers, defibrillators and
programmable shunt valves or other medical devices. Do not put this product close to
these medical devices and the person who use any of these medical devices. Consult
your doctor before using this product, if you have any concerns.
DO NOT PLACE CARDS WITH MAGNETS
IN THE VICINITY OF THE HEADSET
This product has magnets. Placing cards with magnets in the vicinity of the product
may affect the magnetism of the card and render it unusable.
READ ALL INSTRUCTIONS BEFORE USE AND
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development
Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe b est conforme à la norme nmb - 003 du canada.
ISEDC RF EXPOSURE STATEMENT
The device is compliance with RF exposure guidelines, users can obtain Canadian
information on RF exposure and compliance.
LE PRÉSENT APPAREIL EST CONFORME
Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,
les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and
compliance d’acquérir. les informations correspondantes.
PRODUCT WARRANTY
Ausounds Intelligence warrants this product to the original purchaser to be free from
defects in material and workmanship, under normal conditions for a period of 1-year
for parts and labor only from the date of original purchase. Ausounds agrees at our
option during the warranty period, to repair any defect in material or workmanship or
to furnish an equal product in exchange without repair charges, during the first 365
days. After 365 days, a flat labor rate may be required and payment sent along with
the product. Except where prohibited by applicable law, this warranty is
nontransferable and is limited to the original purchaser and the country in which the
product was purchased. This warranty gives you specific legal rights, and you may
also have other rights, including a longer warranty duration that may vary under local
laws. If you do not find a solution on our website, please contact the retailer from
whom you made your purchase. Valid warranty claims are generally processed
through the point-of-purchase retailer during the first thirty (30) days after purchase.
This period of time may vary depending on the retailer. If your warranty claim cannot
be processed through the point-of-purchase retailer, please contact our support
department at [e-mail] or call direct at 1-818-873-0113.

Please follow these directions to return your product:
1. Contact Ausounds support at [e-mail] or 818-873-0113 to
receive a return authorization
2. Pack the unit in a well-padded sturdy carton if you do not have the original
packaging
3. Enclose a copy of your sales receipt to validate the date of purchase
4. Ausounds will elect to repair or replace the product free of repair charges during
the first 365 days. After 365 days, payment for labor may need to be sent with the
product. Call customer support at 818-873-0113 or email
[email protected]
Ausounds Intelligence
Attention: Warranty Services
3190 Chicago Ave Riverside, CA 92507-3448 US
NOTE: This warranty does not cover any product which has been subject to damage
due to misuse, neglect, accidental damage, abuse, commercial use, or any product
modifications. This warranty does not cover damage due to improper operation or
maintenance, connection to an improper voltage supply, or attempted repair by
anyone other than Ausounds. This warranty does not cover products sold AS IS or
refurbished units. For consumers, who are covered by consumer protection laws or
regulations in their country of purchase or, if different, their country of residence,
the benefits conferred by Ausounds’ Limited Warranty are in addition to all rights
and remedies driven by such consumer protection laws and regulations , including
but not limited to these additional rights.
National Statutory Rights
Consumers have legal rights under applicable national legislation governing the
sale of consumer goods. Such rights are not affected by the warranties in this
Limited Warranty. In Brazil, remedies include the consumer’s option to keep the
defective product and receive a proportional price reduction.

European Union notice:
Please note that, in the European Union, any warranty period less than two years shall
be increased to two years.
For Australia/New Zealand Consumers Only:
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. This warranty is provided
by Ausounds Intelligence, LLC 15300 Ventura Blvd Suite 214 Sherman Oaks, CA
91403. Contact information for Australia/New Zealand Consumers Only: Telephone:
1 818-873-0113. For any product/warranty -related questions, please contact
customer support at [email protected]
For Japan Consumers Only:
The Federal Arbitration Act (the “FAA”) applies to the agreement to arbitrate to the
maximum extent allowable. Except as preempted by FAA, the laws of the State of
California, without reference to its choice of laws principles, will govern this Limited
Warranty. With the exception of disputes in small claims court or in arbitration, You
and Ausounds consent to jurisdiction and venue in the state or federal courts located
in Los Angeles County, California, for any claims arising out of a dispute relating to
this Limited Warranty. Notwithstanding the Section titled “Binding Arbitration and
Class Action Waiver”, if You are a consumer in Japan, You have the right to resolve
disputes before the Tokyo District Court in Japan. Nothing in this Limited Warranty
affects Your rights as a consumer in Japan to rely on mandatory provisions of
Japanese law. Contact information for Japanese Consumers Only: Telephone:
03-3477-0122. For any product/warranty -related questions, please contact
customer support at [email protected]

Câble de charge
Écouteurs Boîtier de charge
Merci d’avoir acheté les écouteurs hybrides AU-Stream de
suppression active du bruit Veuillez lire attentivement ce manuel
d’utilisation avant d’utiliser ce produit et de le conserver pour
référence ultérieure.
Les écouteurs hybrides AU-Stream sont conçus avec des passionnés
de musique et des créateurs. Le driver AU-Titanium de 9,2mm haute
performance et la suppression active du bruit hybride offrent une
scène sonore précise tout en réduisant les bruits ambiants
distrayants. L’Hybride AU-Stream est extrêmement transparent et
dynamique avec une plage de fréquences de 20Hz à 20kHz. La durée
de vie totale de la batterie de 25heures dotée de la charge sans fil
rapide signifie que vous ne manquerez jamais un battement. D’autres
caractéristiques clés telles que Bluetooth® 5.0avec Smart
Association et un taux d’étanchéité IPX5font des écouteurs hybrides
AU-Stream la solution audio de haute qualité idéale.
CONTENU
Veuillez vérifier si les pièces suivantes de la boîte sont complètes
Embouts auriculaires

DÉTAILS DU PRODUIT
Veuillez charger 1heure avant la première utilisation.
Panneau de commande tactile
Indicateur de charge LED
Port de charge USB-C
Indicateur LED

CONFORT D’ÉCOUTE
Sélectionnez la bonne taille d’embout auriculaire
Porter des écouteurs
Sélectionnez l’embout auriculaire qui offre le port le plus confortable
et le meilleur son audio. Tirez légèrement sur l’embout auriculaire
pour l’enlever des écouteurs et installez un nouvel embout auriculaire
adapté.
Insérez légèrement les écouteurs dans l’oreille et faites-les pivoter
pour plus de confort. Il y a un écouteur gauche et droit comme
indiqué par les marqueurs L et R.

CARACTÉRISTIQUES BLUETOOTH
Connexion automatique
Le système AU-Stream hybride enregistre votre dernier appareil
connecté en mémoire. Si vos écouteurs sont déconnectés, car
hors de portée, ils se reconnectent automatiquement une fois dans
la plage. S’il est déconnecté pendant plus de 30minutes, sélection-
nez le nom du Bluetooth sur votre appareil pour vous reconnecter.
S’il est déconnecté pendant plus de 2 heures, il s’arrête
automatiquement.
Basculer automatiquement entre l’oreille gauche et droite
En retirant l’écouteur gauche ou droit du boîtier de charge, le mode
passe à l’état d’oreille unique et ne diffuse que l’audio à travers
l’écouteur actif restant.
Réinitialiser
Retirez les écouteurs du boîtier de chargement, puis appuyez sur
les deux panneaux tactiles et maintenez-les enfoncés pendant 8
secondes en même temps pour effacer l’enregistrement de
couplage et entrer en mode d’appariement. (Les dispositifs
Android varient selon le système)