Austin VT-2758-A03 User manual

143.1
5.63
5.08
.200
9.55
.376
157.0
6.18
76.2
3.00
101.6
4.00
40.7
1.60
56.2
2.21
44.4
1.75
ISO VIEW
3
1
4
2
4.31
.170
4X
82.6
3.25
101.6
4.00
95.3
3.75
A
C
L
62.6
2.46
113.9
4.48
107.7
4.24
82.3
3.24
DETAIL A
SCALE 1 : 2
ITEM PART NUMBER REV DESCRIPTION QTY
1 MBC-2758-005 B WASHER 4
2 MBC-2758-003 F VENT BASE 1
3 MBC-2758-004 F VENT COVER 1
4 MBC-2758-006 C VENT HOSE ADAPTER 1
REV
K
VENT ASSEMBLY
DESCRIPTION:
PART NUMBER:
THIRD ANGLE
PROJECTION
12-15-2014
CREATION DATE:
FILE NAME:
CREATED BY:
dlay
TEMPLATE REV 4/7/2011
www
.
austinhardware
.
com
DIMENSIONS MAY CHANGE WITHOUT NOTICE
INFORMATION ON THIS DRAWING BELONGS TO AUSTIN HARDWARE AND MAY NOT BE REPRODUCED OR DISTRIBUTED WITHOUT PERMISSION.
Sheet1 of 3
Y_VT-2758-A03
VT-2758-A03
FINISH: SEE DETAIL DRAWING
WEIGHT: 1.65 LBS.
MATERIAL: SEE DETAIL DRAWING

MOUNTING HOLE FOR CUSTOMER
SUPPLIED #8 OR #10 SCREW
3
1
4
2
MOUNTING HOLE FOR CUSTOMER
SUPPLIED #8 FASTENER (4X)
OPTIONAL FASTENER
MOUNTING SURFACE (X2)
USED TO LOCK VENT BASE
TUBE INTO VENT ADAPTER
SECURING TABS FOR 4" HOSE
SECURING TABS FOR 3" HOSE
MOUNTING TABS
FLEXIBLE BASE FOR UNEVEN
MOUNTING SURFACES
CURVATURE TO ACCOUNT
FOR VENT BASE FLEX
(1/4" OF DEFLECTION)
MESH SCREEN MOLDED INTO BASE
BOTTOM LIP IS
CHAMFERED TO CREATE
A GASKETING EFFECT
WHEN FASTENED DOWN
MOUNTING HOLE FOR CUSTOMER
SUPPLIED #8 SCREW 4X
86.1
3.39
RECOMMENDEED HOLE CUTOUT IS 3.50"
REV
K
VENT ASSEMBLY
DESCRIPTION:
PART NUMBER:
THIRD ANGLE
PROJECTION
12-15-2014
CREATION DATE:
FILE NAME:
CREATED BY:
dlay
TEMPLATE REV 4/7/2011
www
.
austinhardware
.
com
DIMENSIONS MAY CHANGE WITHOUT NOTICE
INFORMATION ON THIS DRAWING BELONGS TO AUSTIN HARDWARE AND MAY NOT BE REPRODUCED OR DISTRIBUTED WITHOUT PERMISSION.
Sheet2 of 3
Y_VT-2758-A03
VT-2758-A03
FINISH: SEE DETAIL DRAWING
WEIGHT: 1.65 LBS.
MATERIAL: SEE DETAIL DRAWING

MOUNTING SURFACE (REF)
3.50" (REF)
**NOTE**
IF INSTALLING ADAPTER PRIOR TO INSTALLING VENT:
4.25" CUTOUT RECOMMENDED. •
IT IS CRITICAL
THAT YOU CENTER THE VENT BEFORE •
MOUNTING TO ENSURE ALL FASTENERS ENGAGE MOUNTING SURFACE.
VENT HOSE TUBE
ASSEMBLY & INSTALLATION
STEP #3:
ATTACH VENT COVER BY SLIDING IT •
BACKWARDS INTO THE VENT BASE.
MAKE SURE TO ALIGN THE MOUNTING •
TABS TO THE MOUNTING SLOTS.
STEP #1:
PREPARE MOUNTING AREA BY CREATING A CUTOUT •
FOR THE VENT BASE TUBE TO PASS THROUGH.
(RECOMMENDED DIAMETER IS 3.50")
BASE WILL CONFORM TO NON-FLAT MOUNTING •
SURFACE
ATTACH VENT BASE TO VEHICLE MOUNTING SURFACE •
BY USING (CUSTOMER PROVIDED) #8 FASTENERS
THROUGH THE PROVIDED WASHERS.
STEP #2:
ATTACH VENTILATION HOSE TO THE 3" OR 4" SECTION •
OF THE VENT HOSE ADAPTER.
THEN ATTACH VENT HOSE ADAPTER TO VENT BASE BY •
USING TAPE AND/OR FASTENERS. (SEE ILLUSTRATION
TO RIGHT)
STEP #4:
LASTLY, SECURE VENT COVER BY INSERTING •
(CUSTOMER PROVIDED) #8 / #10 FASTENER IN THE
REAR HOLE OF THE VENT.
NOW THE ENTIRE VENT ASSEMBLY IS SECURELY •
CONNECTED THE VEHICLE.
REV
K
VENT ASSEMBLY
DESCRIPTION:
PART NUMBER:
THIRD ANGLE
PROJECTION
12-15-2014
CREATION DATE:
FILE NAME:
CREATED BY:
dlay
TEMPLATE REV 4/7/2011
www
.
austinhardware
.
com
DIMENSIONS MAY CHANGE WITHOUT NOTICE
INFORMATION ON THIS DRAWING BELONGS TO AUSTIN HARDWARE AND MAY NOT BE REPRODUCED OR DISTRIBUTED WITHOUT PERMISSION.
Sheet3 of 3
Y_VT-2758-A03
VT-2758-A03