AUSTRALIAN MONITOR PA800 User manual

LEW trEST, NE EEMPREMTEiE
4EJt] + 4trtr wATTEi
The Australian Monitor PA800 provides serious performance for not so serious dollars.
A professional amplifier in this price range with this sort of superior sonic performance and the flexibility of
a€cepting optional plug-in active filters and limiters, was unheard of before the Australian Monitor PA range.
Having built our reputation in the demanding concert and large installation markets, we now offer a
high value for money amplifier that all venues can enjoy.
FEATURES:
. 2RU Hea\ry Duty custom alloy chassis
. l\4odular Construction - easy seruice
. symmetrical Layout - even weight distribution
. Binding oosts dnd '\peakon outputs
. Balanced inputs and buffered attenuators
. Optional Plug in signal modifiers, high pass &
low pass filters plus limlter module
. Dual twin speed axial fans
. Efficient front to back cooling
.21 position detented attenuators
. 1 watt and clipping indicators
EiITUATIMN trRITItrAL
RELIAE!ILITY I5 EVERYTH ING

PA800 Output power RMS (per channel)
8 ohm 4 ohm
255 watts 400 watts
PRETEcTIBN:
. lndependent rail fuses
. lnput muting at turn on
. Input over voltage protection
. R.F, lnter{erence suppression
. Short circuit protection and ind'cation
. Thermal overload protection
. Mains inrush current suppression and indication
. Layout, grounding, decoupling and componentry have
been optimised to provide the user with
stability, reliability and longevity.
Output Power RMS (bridge mode)
16 ohm 8 ohm
510 watts 800 watts
EPTIc]Ns:
. High Pass Filter card HP1
. Low Pass Filter card LPl
. Limiter card LlM1
o
PEtrIFItrATIENS:
Output lmpedan(e @ 1 kHz: <0.030 ohms
Damping Factor @ 1 kHz re 8 ohms: >260:1
Output Rise Timei <2.8 m 5 (80%, leading edge of 20kHz square wave)
Slew Rate: 50V per m 5 (leading edge.20kHz square wave @ clipping)
Weight: Net 33 lb (lskg), shipping 38.5 lb (17.5kg)
Distortion (0.5 dB below clipping re 4 ohms): THD+N (@ 1 kHz) <0.01%
Frequency Response: 20 Hz 20 kHz < r 0.15 dB
3dB points <10 Hz - 90 kHz
lnput lmpedance: Line to Line (Balanced) 30k ohms
lnput Sensitivity (nominally): For rated power re 8 ohm 1.26 Vrms (+4 dBu)
For rated power re 4 ohm 1.10 Vrms (+3 dBu)
signal/Noise ratio: "A" weighted (re 8 ohm rating) >100 dB
Crosstalk: @ 1 kHz (re B ohm rating) >90 dB
Dimensions: excluding handles 3.5h x 19w x 14.8d (inch)
B8h x 482w x 375d (mrn)
including hand es 3.5h x 19w x 17.7d (inch)
88h x 4B2w x 450d (mm)
(19 inch EIA rack mounting, 2 units high)
Power: 240 & 110V versions available
OTHER MODELS IN THE PA SERIES FAMILY ARE AVAILABLE.
CONTACT YOUR LOCAL DEALER OR NEAREST AUDIO TELEX OFFICE.
NSW: Tei: [phone]
VIC: Tel: [phone]
QLD: Telr [phone]
WAj Tel: [phone]
TASi Tel: [phone]
SA: Tel: [phone]
NZ: Tel: [phone]
Fax: [phone]
Fax: [phone]
Fax: \07) 3252 1231
Fax: [phone]ll
Fax: [phone]
Fax: [phone]
Fax: [phone]
ACN 001 345 rl82
AUSTRALIAN, NEW ZEALAND
EXPORT WEBSITE:
\ rww. a ucl iote lex..o m
Authorised de. er: