Autel MaxiAP AP200C User manual

i
CONTENTS
1GENERAL INTRODUCTION ..........................................................................................1
FUNCTIONAL DESCRIPTION .................................................................................................1
TECHNICAL SPECIFICATIONS...............................................................................................2
WIRELESS COMMUNICATION ...............................................................................................3
POWER SOURCE ...............................................................................................................3
2GETTING STARTED......................................................................................................4
POWERING UP..................................................................................................................4
FUNCTION BUTTONS ..........................................................................................................6
NAVIGATION BUTTONS .......................................................................................................7
3EOBD..............................................................................................................................8
EXITING DIAGNOSTICS......................................................................................................10
4SERVICE......................................................................................................................12
ANTILOCK BRAKE SYSTEM (ABS)......................................................................................12
SUPPLEMENT RESTRAINT SYSTEM (SRS)..........................................................................13
OIL RESET SERVICE ........................................................................................................14
ELECTRONIC PARKING BRAKE (EPB) SERVICE...................................................................14
BATTERY MANAGEMENT SYSTEM (BMS) SERVICE..............................................................15
DIESEL PARTICULATE FILTER (DPF) SERVICE ....................................................................15
STEERING ANGLE SENSOR (SAS) SERVICE .......................................................................16
THROTTLE MATCH SERVICE..............................................................................................17
5HISTORY......................................................................................................................18
6REPAIR REPORTS......................................................................................................19
7MALL ............................................................................................................................20
PURCHASE SERVICE SOFTWARE ........................................................................................20
8ME ................................................................................................................................21
ORDER MANAGER............................................................................................................21
DELETE VEHICLE .............................................................................................................21
DATA LOGGING................................................................................................................21
VCI CONNECTION............................................................................................................22
VCI MANAGER ................................................................................................................22
SETTINGS .......................................................................................................................22

ii
USER MANUAL ................................................................................................................22
9PRODUCT TROUBLESHOOTING...............................................................................23
VEHICLE LINKING ERROR..................................................................................................23
10 WARRANTY AND SERVICE........................................................................................24
LIMITED ONE YEAR WARRANTY.........................................................................................24

1
1 General Introduction
Equipped with ABS and SRS systems, the MaxiAP AP200C is a code reader & service
tool to easily perform 8 most common maintenance services, including Oil Reset, EPB,
BMS, DPF, SAS, Throttle Match, ABS Bleed and Airbag Reset for almost all vehicle
makes and models.
The MaxiAP AP200C package includes a Bluetooth (BT) dongle and a MaxiAP200 app.
It is used to connect to a vehicle’s OBDII port and connect with an Android or iOS device
for quick and easy service functions. It is almost compatible with all vehicle models of
European, Asian, and U.S. vehicles, 1996 and newer.
Functional Description
Figure 1-1 Product View
1. Vehicle Data Connector (16-pin) –connects the MaxiAPAP200C to the vehicle’s 16-
pin OBDII port directly.
2. Power LED –indicates system status.
The power LED displays green, blue, and red depending on power level and operating
state.
A. Green
Lights solid green when the MaxiAP AP200C is plugged in and not connected
with the device.
B. Blue
Lights solid blue when the device is connected with the MaxiAP AP200C via

2
Bluetooth.
Flashes blue when the device is communicating with the MaxiAP AP200C, for
example, when the device is reading Engine DTCs.
C. Red
Lights solid red when the MaxiAPAP200C is updating the firmware or when the
update failed, or when the MaxiAP AP200C is locked.
Flashed red fast when the communication failed between the device and the
dongle via Bluetooth. Please restart the dongle until it works properly.
3. Strap Hole –attach the strap to the MaxiAPAP200C.
NOTE
When the MaxiAP AP200C has lost connection from the device for more than 10 minutes,
the LED goes off and the AP200C enters power saving standby mode. The power LED
will light when reconnected.
Technical Specifications
Table 1-1 Specifications
Item
Description
Communications
BL 4.2 Dual-Mode
Wireless Frequency
2.4 GHz
Input Voltage Range
9 VDC to 26 VDC
Supply Current
100 mA@12 V
Sleep Mode Current
3 mA@12 V
Operating Temp.
0°C to 50°C
Storage Temp.
-20°C to 70°C
Dimensions (L*W*H)
59 mm (2.32'') * 44 mm (1.73'') * 21.5mm (0.85'')
Weight
32.1g (0.07 lb.)

3
Wireless Communication
The MaxiAP AP200C uses BT communication. It can transmit vehicle data to your
Android or iOS device. The working range for BT communication is about 33 feet (about
10 m). Signal lost due to moving out of range will automatically be restored once the
device is brought within transmission range to the MaxiAP AP200C connector.
Power Source
The MaxiAP AP200C operates on 12-volt vehicle power that it receives through the
vehicle data connection port. The unit powers on whenever it is connected to an OBDII/
EOBD compliant data link connector (DLC).

4
2 Getting Started
NOTE
The images and illustrations depicted in this manual may differ slightly from the actual
ones. The user interfaces for iOS & Android devices might be slightly different. This
manual uses UI for iOS devices as an example.
Powering Up
1. Download & install app
Scan the QR code or search for MaxiAP200 in App Store or Google Play to
download and install the app to your device.
2. Register & Log in
Open the MaxiAP200 app and tap Register near the top right of the screen.
Follow the on-screen instructions to complete the registration.
Log in with your registered email address and password.
3. Bind VCI with device
On the Bind VCI interface, scan the QR code imprinted on the Bluetooth dongle to
automatically retrieve the serial number. Ensure the email information is correct. Tap
Bind to pair dongle with device.
4. Purchase & install software
Tap Mall below the list to purchase and install the software selected. Full OBDII
functions included at no charge. ABS and SRS systems are included free for up to
a year through Mall after successfully pairing the dongle for the first time (For iOS
devices, the purchased software will display in the list). After the service software is
downloaded in Mall, go back to the main home screen and tap Service to further

5
download the vehicle make of your selection.
5. Plug the connector of the MaxiAP200C Bluetooth dongle into the vehicle's OBDII
port.
The vehicle's OBDII port is generally located under the vehicle dashboard
(Consult vehicle user manual for specific location).
6. Turn the vehicle ignition to Key On, Engine Off position.
The LED on the dongle will light solid green when connected.
7. VCI Connection
For Android devices, tap Me > VCI Connection or the VCI button near the top right
of the Home screen.
For iOS devices, tap Setting > Bluetooth of your iOS device to open the Bluetooth
function.
Tap the Bluetooth name on the screen to pair it with the device. The Bluetooth name
starts with AP, followed by the serial number of the dongle.
Ensure your device's Bluetooth is turned on.
When the device is successfully paired with the dongle, the LED will light solid
blue.
NOTE
For iOS devices, once a dongle is paired with device via Bluetooth, it cannot be searched
by other devices. When multiple dongles paired to the same device via Bluetooth, only
the first connected dongle lights blue, others will light green.
8. Your MaxiAP200C is now ready for use.

6
Figure 2-1 Sample MaxiAP200C Job Menu
①Dynamic Rotation Banner –display information about other popular Autel
products, tap the banner to visit the product page on Autel websites,
www.autel.com or www.maxitpms.com.
②Application Buttons
③Navigation Buttons
Function Buttons
The table below briefly describes each of the application buttons in the AP200C system.
Table 2-1 Application Buttons
Button
Name
Description
EOBD
Accesses full OBDII/EOBD functions.
Service
Accesses service functions menu.
History
Accesses service records with vehicle information
and DTCs included.
Repair
Reports
Accesses repair reports for EOBD and
maintenance sessions.

7
AP200C-
USA
For iOS devices, this icon will display on the
device's desktop after purchasing and installing the
U.S. and European vehicle data package. Tap on
the icon to start vehicle maintenance.
AP200C-
Asia
For iOS devices, this icon will display on the
device's desktop after purchasing and installing the
Asian and Audi vehicle data package. Tap on the
icon to start vehicle maintenance.
AP200C-
Dms
For iOS devices, this icon will display on the
device's desktop after purchasing and installing the
Domestic vehicle and Benz data package. Tap on
the icon to start vehicle maintenance.
AP200C-
BMW
For iOS devices, this icon will display on the
device's desktop after purchasing and installing the
BMW data package. Tap on the icon to start the
vehicle maintenance.
Navigation Buttons
Operations of the Navigation buttons at the bottom of the screen are described in the
table below:
Table 2-2 Navigation Buttons
Button
Name
Description
Home
Returns to the Home screen.
Mall
Purchase maintenance software.
Me
Displays list of functions, including Order Manager,
Delete Vehicle, Data Logging, VCI Connection, VCI
Manager, Settings and User Manual.

8
3 EOBD
A fast-access option for OBD II/EOBD vehicle diagnosis is available on the Home screen.
This option presents a quick way to check for DTCs, isolate the cause of an illuminated
malfunction indicator lamp (MIL), check monitor status prior to emissions certification
testing, verify repairs, and perform a number of other servicesthat are emissions-related.
The OBD direct access option is also used for testing OBD II/EOBD compliant vehicles
that are not included in the Diagnostics database.
General Procedure
To access the OBD II/EOBD diagnostics functions
1. Tap the EOBD button. There are two options to establish communication with
the vehicle.
Auto Scan –when this option is selected the diagnostic tool attempts to
establish communication using each protocol in order to determine which
one the vehicle is broadcasting on.
Protocol –when this option is selected the screen opens a submenu of
various protocols. A communication protocol is a standardized way of data
communication between an ECM and a diagnostic tool. Global OBD may
use several different communication protocols.
2. Select a specific protocol under the Protocol option. Wait for the OBD II
Diagnostic Menu to display.
3. Select a function option to continue.
DTC & FFD
I/M Readiness
Live Data
On-Board Monitor
Component Test
Vehicle Information
Vehicle Status
NOTE
Some functions are supported only on certain vehicle makes.
This section describes the various functions of each diagnostic option: