Autel MaxiSys Ultra User manual

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
The VCMI/VCI icon displays when the VCMI/VCI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
QUICKSTART GUIDE
CONNECTING TO Wi-Fi
The instructions below apply to MSUltra, MS919 and MS909
The instructions below apply to MSUltra, MS919 and MS909
- A larger menu with additional options including
Wi-Fi will display.
• Select Wi-Fi
• Tap on the lower right hand corner of the screen
- The Quick Settings menu will display.
• Tap
No Internet Connection next to the Wi-Fi signal icon
• Ensure you are connected to Wi-Fi: The Wi-Fi icon will
display in the bottom right-hand corner
• Enter your network password to sign in
• Make sure Wi-Fi is turned on
• Select your network
3
• Make sure Wi-Fi is turned on
• Select your network
• From the Android screen, select Settings
1 2
1
• Once connected, follow the instructions on the
“Updating your MaxiSYS” document
- The Wi-Fi icon will light when connection is established.
4
2
3 4

This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
TOOL REGISTRATION VIA PC
• Set preferred language
• Enter your email address as Autel ID
• Click Get Verication Code
• Select Product Registration from the menu list
- Product Registration screen will display.
• Input your tablet’s Product Serial Number and Password
• Type Captcha code as shown
• Click Submit to complete tablet registration
• Using a computer, launch an Internet browser and go to http://pro.autel.com
• Click Create Autel ID on the left side of the screen
• If you already have an Autel ID, sign in and skip to Step 6
- An email titled “Verication Code for New User Registration”
will be sent to you.
• Open email and copy the 6-digit verication code
• Return to http://pro.autel.com to continue registration
• Click Create Autel ID at the bottom of the screen
- Registration Complete screen will display.
• Click Sign in Now and log in
• To locate the tablet’s serial number and password: from the Main
Menu select the Setting icon and tap About
• Enter verication code and all other required information marked
with a red asterisk
• Enter Captcha code as shown
• Read the Autel Terms of Use and Privacy Policy and select the check box
6
2
4
Captcha code
8Captcha code
5
1
3
7
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES

This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
TOOL REGISTRATION VIA TABLET
• A sign-in screen will display
• Create an Autel ID using an accessible email address
• The serial number and password elds will be
automatically completed
• Tap Register
NOTE: To nd
your Product
Serial Number
and Register
Password, go to
the Main Menu
select Settings,
then About
NOTE: Update
one at a time.
Select
Update All
button will take
more time.
- A dialog box will display asking you to register your tablet.
• Tap Register
• On a computer or mobile device, check your email
• On the tablet registration screen, enter your email
address, password and verication code
•
Download update for each vehicle manufacturer you service
• Select the iInformation icon next to each update
button to view update details
Software updates are available for FREE for the rst year from date of purchase. Your tool must be registered as per the directions on Page 1 to download software updates.
• Download the system update by selecting the
update button on the right
• Connect your tablet to Wi-Fi and plug it into a power source
• Select the MaxiSYS application or the MaxiSYS home icon
at the bottom of the screen to open the main menu
DOWNLOAD SOFTWARE UPDATES
1
3
3
2
4
4
21
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
• If updates are available, the number of available updates
will display above the green Update button
• Select the Update button to view a list of available updates

This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
DON’T WAIT FOR INITIAL YEAR EXPIRATIONDON’T WAIT FOR INITIAL YEAR EXPIRATION
PURCHASE TO EXTEND MAXISYS
WARRANTY & SOFTWARE
SUBSCRIPTION COVERAGE FOR ONE YEAR
EXTEND INITIAL YEAR OF COVERAGE WITH
SAME DAY ORDER & ACTIVATIONSAME DAY ORDER & ACTIVATION
GET YOUR SUBSCRIPTION FASTER
RECEIVE ACTIVATION CODES VIA EMAIL
ASK YOUR LOCAL TOOL DEALERASK YOUR LOCAL TOOL DEALER
NEW
PURCHASE & ACTIVATE A NEW TCP SUBSCRIPTION
BEFORE UPDATES EXPIRE TO LIMIT DOWN TIME
AND ENSURE CONTINUED VEHICLE COVERAGE
@AutelTools
TRAININGTRAINING
VIDEOSVIDEOS
View More Autel Videos at: https://www.youtube.com/auteltools
REGISTER YOUR MAXISYS AT
PRO. AUTE L.COM & PURCHAS E TCP
USE ACT IVAT ION CODE ON CARD OR
DIGITAL CODE PROVIDED IN EM AIL
REDEEM CODE TO ACT IVAT E
SUBSCRIPTION & WARRANTY
YEAR-TCPYEAR-TCP
TOTAL CARE PROGRAM
DIGITAL DELIVERY
DIGITAL DELIVERY
NEW TCP
Activation Code
PRINTING INSTALLATION & SETUP
• Locate the MaxiSYS PC Suite software and click on the Download Here
button
• Open the zip le
•
Within the program dialogue box, check Auto Print to automatically use the
default printer
• Select Quick Print to use the default printer or select Print to choose a printer
• Make sure your Window PC and tablet are on the same Wi-Fi network
• On your computer, go to Autel.com, select Support > Downloads > Autel
Update Tools
• Select MaxiSYS Print, then click the setup.exe le to install the program
Works with any printer with a Wi-Fi connection. No need for special software or driver on the tablet.
4
1
3
2
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
You will need to reclick or open
each time you restart windows

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
QUICKSTART GUIDE
VCMI CONNECTION VIA BLUETOOTH
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
The VCMI/VCI icon displays when the VCMI/VCI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
- Your tablet will automatically start scanning for
available VCMI devices. Found devices are
listed on the right side of the screen.
- When the VCMI device is ready to use, a green mark will
display on the VCMI button at the bottom of he screen.
• Select the VCMI Manager application from the Main
Menu or from the bottom toolbar
-
The paired device will display as “Connected”.
4
VCMI CONNECTION VIA WI-FI
- Your tablet will automatically start scanning for available
VCMI devices. Found devices are listed on the right side
of the screen.
• Select the VCMI Manager application icon from the Main
Menu or from the bottom toolbar
1 2
1
3
2
- When the VCMI device is ready to use, a green mark will
display at the VCMI button on the bottom of the screen.
3 4
- When a connection is established, the connected
device will display as “Connected”.

VID - VEHICLE IDENTIFICATION DETECTION |SCAN VIN
• Select the VCMI Manager application from the Main
Menu
• Select the blue VID button on the top left of the screen
•
Select Scan VIN from the drop-down menu
- The current and latest version of the VCMI software will display.
• If available, tap the
Update Now button to download software
• Select Diagnostics from the Main Menu
• Select
Update from the Connection Mode list on the
left side of the screen
• Position the camera so the VIN number (located on
the vehicle dash or vehicle door jamb) displays within
the scanning frame.
3 4
4
1 2
1 2
3
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
QUICKSTART GUIDE
VCMI SOFTWARE UPDATES
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
The VCMI/VCI icon displays when the VCMI/VCI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
- The VIN is scanned and recognized automatically.
The result displays in the Recognition result dialog box.
•
Tap OK to conrm the VIN and continue
Scan by Text
Option
Scan by Barcode
Option
• Connect the VCMI device to the MaxiSYS tablet via USB
- Connect the VCMI to a power source to ensure updates are
installed correctly.

This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
VID - VEHICLE IDENTIFICATION DETECTION
AUTO VIN DETECT (COMPATIBLE W/ VEHICLES 2007 AND NEWER)
AUTO-SCAN
• Select the blue VID button on the top left of the screen
• Select the vehicle manufacturer
• Select
Diagnostics from the Main Menu
• Select Diagnostics from the Main Menu
• Select
Auto Detect from the drop-down menu - Once the vehicle is successfully identied, the
diagnostic menu will display.
3 4
1 2
1 2
34
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
• All available systems will display• Select Automatic Selection to acquire VIN
automatically. Tap Manual input to type in the VIN

• Select Diagnostics from the Main Menu
• Please note: Not all vehicles support topology mapping of all vehicle systems
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
TOPOLOGY MODULE MAPPING
- A topology module map of all available systems
will display after the Auto SCAN. All systems
display in Dark Blue.
• Tap
Fault scan at the bottom of the screen to scan
system faults
1 2
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
- A system found to have faults will display in Orange,
with the number of faults detected displayed in the
upper right corner of the system icon.
- A system icon that displays as Green indicates the
system is without faults; A Gray system icon indicates
the system did not respond when scan was attempted.
3
• Tap List tab to view all available systems in list
format
- The third column displays Not Scanned indicating the
system has not been scanned.
• Tap
Fault scan at the bottom of the screen to scan
system for faults
4
• Data Trouble Codes (DTCs) can be viewed directly
after scanning.
• Fault | #: Indicates faults are present; “#”
indicates the number of detected faults.
• Pass | No Fault: Indicates the system was scanned
and no fault was detected
• No Response: Indicates the system was
unresponsive
5
• For vehicles that do not support Topology mapping a
System List will display after the Auto SCAN
• Tap Fault scan at the bottom of the screen to scan
system for faults
• DTCs can be viewed after scanning. Scroll to review
systems.
6

• On the list page, once the system scan is
complete, tap the
Intelligent Diagnostics icon or
Intelligent Diagnostics button to view Intelligent
Diagnostics page
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE
• On the topology page, tap an orange-colored system icon
(faults detected) to display the
Intelligent Diagnostics icon.
Tap the icon or the
Intelligent Diagnostics button.
1 2
- Code-related information such as Technical Service
Bulletin (TSB), DTC Analysis, Repair Assist, Repair
Tips, Component Measurement, and Relevant
Cases will display on the screen.
• Tap the drop-down menu to view comprehensive
information of All systems or select a different
fault code to review.
3 4
• Select a TSB to display page, and review the
code-related vehicle manufacturer advisory.
5 6
• Tap the DTC analysis button
- Repair data related to fault codes will display.
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
• Select a component test under the Component
Measurement
section
- The oscilloscope page displays relevant wiring
diagrams, standard waveform, waveform analysis,
and detailed notation.
• Tap the
Repair Assist button on the Intelligent
Diagnostics page
- The system will automatically prioritize DTCs, and
display step-by-step repair guide.
7 8

12
34
• TAP the Workshop Information Icon.
6
Reports are stored in Vehicle History, accessible through
Data Manager or through Diagnostics under the History
tab.
The generated Pre- and Post Scans are now complete
with shop information and ready to be emailed to
insurance company or printed for customer review.
PRE/POST SCAN REPORTS
• Select the Data Manager icon on the MaxiSYS
home screen.
Repair Shop: Stormy's Vehicle Repairs Report Number: MAXIA20200616
Phone Number: 1631671549 Creation Date: 2020-06-16
Address: 123 Nathan Hale Drive
Repair order: AAW67521
Client:
Client Phone Number:
VIN: I2J6YH28543L01742
Mileage: 164674
Color:
2004 Honda Vehicle Diagnostic Report
Scan type: Pre-scan&Post-scan
License Plate: CYC3236
Manufacturer: Honda
Year: 2004
Model: Element
Sub Model: USA
Engine:
Path: Honda>Post-Scan>
IInnssuurraanncceeiinnffoorrmmaattiioonn
Insured name: B Smith Claim number:
Contact Information: City state zip:
Insurance company: Alrighyinsurance Co
Address:
Primary impact:
PPrree--ssccaannRReeppoorrtt2020-06-15 17:19:13
System Status
1. Engine-PGM FI Fault | 1
2. AT Pass|No Fault
3. ABS/TCS/VSA Fault | 1
4. SRS Fault | 1
5. IMMOBI Pass|No Fault
DDTTCC
1. Engine-PGM FI( 1 DTC )
DTC Code DTC Description Status
1.1 P0442 EVAP system small leak Permanent DTC
2. ABS/TCS/VSA( 1 DTC )
DTC Code DTC Description Status
2.1 23-1 Right rear pulsar failure Permanent DTC
3. SRS( 1 DTC )
DTC Code DTC Description Status
Prior to Running Pre/Post Scans, it is recommended the following steps are taken to customized the reports.
To Add logo: Tap the image icon and select from the
drop-down menu to either take a photo with the tablet
or to upload an image from the tablet.
Complete the elds on this screen by tapping on each
eld and inputting information. The information entered
here will display on every Pre and Post Scan generated.
7
6
8
5
Access stored report Select pencil icon and from drop-down menu, choose
view, print, or email report.
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
QUICKSTART GUIDE

This quickstart guide applies to the MaxiSys®Ultra and MaxiSys®MS919.
The VCMI icon displays when the VCMI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
QUICKSTART GUIDE
MAXISYS MEASUREMENT APPS SUITE
OSCILLOSCOPE
The VCMI device functions as an
oscilloscope to view and analyze
waveforms by sampling the signals of
vehicle sensors and actuators.
Waveform
GENERATOR
The multi-functional VCMI device
performs as a waveform generator to
simulate various signals of vehicles’
sensors and actuators.
MULTIMETER
The versatile VCMI device performs
as a multimeter that detects
the signals of vehicle circuits,
components, and diode. Use to
measure voltage, current, resistance
and frequency. There are three
display modes available.
OSCILLOSCOPE
Waveform GENERATOR
MULTIMETER
OBDII CAN bus check
21
21
1 2
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
2
The VCMI’s OBDII CAN bus check
application enables testing of CAN
bus activity and identies electrical
faults.
1
OBDII CAN
bus check

2
This quickstart guide applies to the MaxiSys®Ultra, MaxiSys®MS919 and MaxiSys®MS909.
The VCMI/VCI icon displays when the VCMI/VCI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
QUICKSTART GUIDE
MAXISYS SYSTEM SUITE APPS
Service
Designed to provide quick access
to the vehicle systems for various
service and maintenance tasks.
Comprehensive service functions
including Oil Reset, EPB, SAS, DPF,
TPMS, and BMS.
Remote
DESKTOP
Enables our tech support specialists
upon your authorization to remotely
log into the tablet and help you
update software on tablet and
VCMI, perform difcult diagnostic
procedures or complicated vehicle
services. This real-time support
provides quick and accurate
solutions.
D ATA L O G G I N G
Interactive recording sessions save
vehicle testing data issues and
enables direct contact with Autel’s
technical support staff for rst-hand
troubleshooting of diagnostic bugs
and errors.
Service
REMOTE DESKTOP
DATA L O G G I N G
DATA M A N AG E R
DATA
MANAGER
Designed to store all data les,
customer information and vehicle ID
and vehicle diagnostic records.
21
21
1
12
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES