AUTO-XS AU315001 User manual

After Sales Support
1300 663 907
Model Number AU315001
Getting Started Guide
Mounting the Winch
Connecting the Winch
This guide is a reference only. Ensure you read the included instruction manual before using the
Auto XS® Boat Winch.
Consult your trailer manual to locate best position
to x the mounting plate.
Plug the input of the power lead into the power socket
located on the side of the boat winch.
The included mounting plate is designed for use with
U-bolts (sold separately). Select appropriate sized U-bolts
to suit your trailer before installation.
Connect the power lead to your car battery by securely clip-
ping the black clasp to the negative terminal of the battery,
then connect the red clasp to the positive terminal. Con-
nect the wired remote control to the remote control socket,
located on the side of the boat winch.
After the plate is securely mounted, align the base of
the boat winch with the three quick release mounting
bolts on the plate. Once inserted, slide forward and
ensure the winch is secure.
AU315001 12V BOAT WINCH
1
1
2
2
3
[e-mail]

After Sales Support
1300 663 907
Model Number AU315001
Getting Started Guide Continued
Using the Winch
Ensure your vehicle is in Park and engage your hand
brake. Use a wedge under the wheel of the vehicle.
Release the clutch on the winch by turning the clutch
knob counter clockwise.
Re-tighten the clutch knob by turning it clockwise to
engage the electric motor.
Pull out the length of cable required, and attach the
hook onto the load. Only connect to a designated
pulling point, tow strap or chain intended for towing.
Start the car engine and stand at a safe distance before
operating the boat winch. When it is safe to operate,
press IN on the remote control to retract the cable.
Remove and store in a dry place when not in use.
AU315001 12V BOAT WINCH
1
2
4
3
5
6
[e-mail]