AUTOCUE Heavy Tripod Medium User manual

Guide
Medium Heavy
Folded Height
(mm)
760 910
Max. Operang
Height (mm)
1575 1750
Minimum Height
(mm)
720 810
Net Weight (Kg) 4.2 9.3
Max. Load
Capacity (Kg)
6 18
Tilt Range
(degrees)
-85/90 -85/85
Pan Range
(degrees)
360 360
Ball Base (mm) 60 70
Camera Fixing Quick attachment & release
slide system, 3/8” and 1/4”
camera screw
Material Aluminium Aluminium
Specifications
Models
Heavy
Tripod
Changing the
Camera Screw Fixing
1. Remove the knob
retaining screw.
2. Remove knob by
turning anti-clockwise.
3. Remove the camera
fixing screw from the
slot.
4. Change the camera
fixing bolt for the
alternative size.
5. Replace the knob
by turning clockwise,
then replace the
retaining screw and
retighten.
autocue.com

Components
ALeg locking knobs
BHead
CSpreader
DBag
EHot shoe
FPan bars
GPan bar clamp
HHot shoe locking
knob
IPan lock
A
A
B
C D
E
F
Assembly
1. Before opening the tripod,
release all three locking knobs
and lift up the tripod to the
desired height. Relock the legs
and open the tripod.
5. To remove the hot
shoe loosen the hot
shoe locking knob so
that the hot shoe
moves freely.
6. Turn the safety lock
anti- clockwise to
allow the hot shoe to
slide free.
7. Attach the hot
shoe to a camera or
prompter and place
back on the tripod
head.
8. There is a choice of
1/4” or 3/8” BSW
camera fixings.
4. Lock the
head by using
the tilt (A) and
pan (B) locks.
A
B
2. Level the head by
loosening the knob
(A) under the head.
3. Fit pan bars by placing
them in the clamp and
securing them with the
bolt (A)
A
G
H
9. Adjust the spreader so that the legs are at
the desired angle by loosening the spreader
adjustment knob and then retighten it.
I
autocue.com
A