Autodesk AUTOCAD 2010 - STAND-ALONE User manual

AutoCAD 2010
Stand-Alone Installation
Guide
January 2009

©2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December,
3December.com, 3ds Max, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD
Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk
Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch,
AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner,
Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next>
(design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio,
Design|Studio (design/logo), Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF,
Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Filmbox, Fire, Flame, Flint, FMDesktop, Freewheel, Frost, GDX Driver, Gmax,
Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor
LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, LocationLogic, Lustre, Matchmover, Maya, Mechanical Desktop, Moonbox,
MotionBuilder, Movimento, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, PolarSnap, PortfolioWall,
Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG, Reactor, RealDWG, Real-time Roto, REALVIZ,
Recognize, Render Queue, Retimer,Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo),
SteeringWheels, Stitcher, Stone, StudioTools, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual Construction, Visual Drainage, Visual
Landscape, Visual Survey, Visual Toolbox, Visual LISP, Voice Reality, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo).
The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries:
Backburner,Multi-Master Editing, River, and Sparks.
The following are registered trademarks or trademarks of MoldflowCorp. in the USA and/or other countries: Moldflow, MPA, MPA
(design/logo),Moldflow Plastics Advisers, MPI, MPI (design/logo), Moldflow Plastics Insight,MPX, MPX (design/logo), Moldflow Plastics Xpert.
All other brand names, product names or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Published by:
Autodesk, Inc.
111 Mclnnis Parkway
San Rafael, CA 94903, USA

Contents
Chapter 1 Quick Start to Stand-Alone Installation . . . . . . . . . . . . . . 1
Preparing for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding Administrative Permission Requirements . . . . . . 5
Locating Your Serial Number and Product Key . . . . . . . . . . . 6
Avoiding Data Loss During Installation . . . . . . . . . . . . . . . 7
Choosing a Language . . . . . . . . . . . . . . . . . . . . . . . . . 7
Configure Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Migrating Custom Settings . . . . . . . . . . . . . . . . . . . . . . 9
Installing Multiple or Bundled Products . . . . . . . . . . . . . . . 9
Installing and Running the Product . . . . . . . . . . . . . . . . . . . . 9
Installing AutoCAD . . . . . . . . . . . . . . . . . . . . . . . . . 10
Register and Activate AutoCAD . . . . . . . . . . . . . . . . . . . 18
Launch AutoCAD . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Add or Remove Features . . . . . . . . . . . . . . . . . . . . . . . 19
Reinstall or Repair AutoCAD . . . . . . . . . . . . . . . . . . . . 21
Uninstall AutoCAD . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installing Design Review . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 2 Migrating and Customizing . . . . . . . . . . . . . . . . . . . . 25
Migrate Custom Settings and Files from Previous Releases . . . . . . . . 25
Migrate Custom Settings . . . . . . . . . . . . . . . . . . . . . . 26
View the Migration Log File . . . . . . . . . . . . . . . . . 30
iii

Restore Profiles After Migrating Files from an Earlier
Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Use Migration Tools . . . . . . . . . . . . . . . . . . . . . . . . . 31
Customize AutoCAD with Initial Setup . . . . . . . . . . . . . . . . . . 32
Export and Import Custom Settings from the Same Release . . . . . . . 35
Export Custom Settings . . . . . . . . . . . . . . . . . . . . . . . 38
Import Custom Settings . . . . . . . . . . . . . . . . . . . . . . . 39
Migrating and Customizing Issues . . . . . . . . . . . . . . . . . . . . 40
What are the benefits of identifying my industry? . . . . . . . . . 41
How is this information being used? . . . . . . . . . . . . . . . . 41
What happens if I skip or cancel Initial Setup? . . . . . . . . . . . 41
What are the benefits of selecting task-based tools? . . . . . . . . 42
What is a workspace? . . . . . . . . . . . . . . . . . . . . . . . . 42
How do I make changes to a workspace at a later time? . . . . . . 42
What is a drawing template file? . . . . . . . . . . . . . . . . . . 43
How do I modify drawing templates at a later time? . . . . . . . . 43
What are the benefits of customizing AutoCAD? . . . . . . . . . 43
How do I return to this later? . . . . . . . . . . . . . . . . . . . . 44
Chapter 3 Installation Troubleshooting . . . . . . . . . . . . . . . . . . . 45
General Installation Issues . . . . . . . . . . . . . . . . . . . . . . . . 45
How can I check my graphics card driver to see if it needs to be
updated? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
What is a text editor used for? . . . . . . . . . . . . . . . . . . . 46
When performing a Typical installation, what gets
installed? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Why should I install the Material Library? . . . . . . . . . . . . . 47
Where are my product manuals? . . . . . . . . . . . . . . . . . . 47
Licensing Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
What is the difference between a stand-alone license and a
network license? . . . . . . . . . . . . . . . . . . . . . . . . . . 48
What is the benefit of using a network licensed version of the
software? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
What is Internet Explorer used for? . . . . . . . . . . . . . . . . . 49
Uninstall and Maintenance Issues . . . . . . . . . . . . . . . . . . . . 49
When adding or removing features, how can I tell what features
get installed by default? . . . . . . . . . . . . . . . . . . . . . . 49
Is it possible to change the installation folder when adding or
removing features? . . . . . . . . . . . . . . . . . . . . . . . . 51
When should I reinstall the product instead of a repair? . . . . . . 51
Do I need my original disc to reinstall my software? . . . . . . . . 51
After repairing my installation, is it possible to recover my
settings? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
When I uninstall my software, what files are left on my
system? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
iv | Contents

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Contents | v

vi

Quick Start to Stand-Alone
Installation
The Stand-Alone Installation Guide provides instructions about how to prepare, and then install
AutoCAD 2010. If you have never installed the product before, you should familiarize yourself
with the entire installation process and options before beginning.
If you have a previous release installed, you should review the Migrate Custom Settings and
Files from Previous Releases on page 25 section, so you can take full advantage of your custom
settings.
For information about installing network-licensed versions of the program, see the following
related topics:
■Choose an Installation Type (Network Administrator’s Guide)
■Select a License Type (optional) (Network Administrator’s Guide)
■What is the difference between a stand-alone license and a network license?
■What is the benefit of using a network licensed version of the software?
Preparing for Installation
To prepare for installation, you should review the system requirements,
understand administrative permission requirements, locate your AutoCAD serial
number and product key, and close all running applications. Complete these
tasks, and you are ready to begin installing AutoCAD.
1
1

System Requirements
The first task you need to complete is to make sure that your computer meets
the minimum system requirements. If your system does not meet these
requirements, problems can occur, both within AutoCAD and at the operating
system level.
Whether your Windows operating system is the 32-bit or the 64-bit version,
the version is automatically detected during installation. The appropriate
version of AutoCAD is installed. A 64-bit version of AutoCAD cannot be
installed on a 32-bit system and vice-versa.
See the following table for hardware and software requirements.
32-bit Hardware and Software Requirements
For more information on Windows
Vista versions see http://www.mi-
crosoft.com/windowsvista/versions/
Windows®XP Home and Professional
Edition SP2 or later
Microsoft®Windows Vista®SP1 or later
including:
Operating systems
■Windows Vista Enterprise
■Windows Vista Business
■Windows Vista Ultimate
■Windows Vista Home Premium
Internet Explorer®7.0 or later
Browser
Windows XP - Intel®Pentium®4 or AMD
Athlon™Dual Core processor, 1.6 GHz
or higher with SSE2 technology
CPU type
Windows Vista - Intel Pentium 4 or AMD
Athlon Dual Core processor, 3.0 GHz or
higher with SSE2 technology
Windows XP - 2 GB RAMMemory
Windows Vista - 2 GB RAM
1024 x 768 with True ColorDisplay resolution
A 32-bit AutoCAD cannot be installed
on a 64-bit Windows operating sys-
tem and vice-versa.
Installation 1 GBHard disk
2| Chapter 1 Quick Start to Stand-Alone Installation

32-bit Hardware and Software Requirements
MS-Mouse compliantPointing device
3D Modeling Addi-
tional Requirements
■Intel Pentium 4 or AMD Athlon
processor, 3.0 GHz or higher; or In-
tel or AMD Dual Core processor, 2.0
GHz or higher
■2 GB RAM or greater
■2 GB free hard disk space available
not including installation
■1280 x 1024 32-bit color video dis-
play adapter (True Color) 128 MB
or greater, Direct3D®capable
workstation class graphics card
64-bit Hardware and Software Requirements
For more information on Windows
Vista versions see http://www.mi-
crosoft.com/windowsvista/versions/
Windows®XP Professional x64 Edition SP2
or later
Microsoft®Windows Vista®SP1 or later
including:
Operating systems
■Windows Vista Enterprise
■Windows Vista Business
■Windows Vista Ultimate
■Windows Vista Home Premium
Internet Explorer 7.0 or laterBrowser
AMD Athlon 64 with SSE2 technologyCPU type
AMD Opteron™with SSE2 technology
Intel Xeon with Intel EM64T support and
SSE2 technology
Intel Pentium 4 with Intel EM64T support
and SSE2 technology
Windows XP - 2 GB RAMMemory
Windows Vista - 2 GB RAM
System Requirements | 3

64-bit Hardware and Software Requirements
1024 x 768 with True ColorDisplay resolution
A 64-bit AutoCAD cannot be in-
stalled on a 32-bit Windows operat-
ing system and vice-versa.
Installation 1.5 GBHard disk
MS-Mouse compliantPointing device
3D Modeling Addi-
tional Require-
ments
■Intel Pentium 4 or AMD Athlon pro-
cessor, 3.0 GHz or higher; or Intel or
AMD Dual Core processor, 2.0 GHz or
higher
■2 GB RAM or greater
■2 GB free hard disk space available not
including installation
■1280 x 1024 32-bit color video display
adapter (True Color) 128 MB or
greater, Direct3D®capable worksta-
tion class graphics card
Additional Hardware and Software Recommendations - 3D use
32-BitOperating system ■It is recommended that non-
English language versions of
Windows XP Home and Professional SP2
or later AutoCAD be installed on an oper-
Windows Vista Enterprise ating system with a user interface
Windows Vista Business language that matches the code
Windows Vista Ultimate page of AutoCAD language. A
Windows Vista Home Premium code page provides support for
64-Bit character sets used in different
languages.
Windows XP Professional x64 Edition
SP2 or later ■Whether the Windows operating
system is 32-bit or 64-bit, the
Windows Vista Enterprise 64-bit
Windows Vista Business 64-bit version is automatically detected
Windows Vista Ultimate 64-bit when you install AutoCAD. The
Windows Vista Home Premium 64-bit appropriate version of AutoCAD
is installed. The 32-bit version of
AutoCAD cannot be installed on
4| Chapter 1 Quick Start to Stand-Alone Installation

Additional Hardware and Software Recommendations - 3D use
a 64-bit version of Windows and
vice-versa.
Intel Pentium 4 processor or AMD Ath-
lon, 2.2 GHz or greater
Processor
or
Intel or AMD Dual Core processor, 1.6
GHz or greater
2 GB (or greater)RAM
1280 x 1024 32-bit color video display
adapter (True Color); 128 MB or greater
Graphics card ■For graphic cards that support
Hardware Acceleration, DirectX
9.0c, or later, must be installed.
Direct3D capable workstation class
graphics card. ■Installing from the ACAD.msi file
does not install DirectX 9.0c, or
For Windows Vista, a Direct3D capable
workstation class graphics card with 128 later. Manual installation of Dir-
MB or greater is required; 1024 x 768
VGA with True Color (minimum) ectX is required, in this circum-
stance, for Hardware Accelera-
tion to be configured.
For more information about tested
and certified graphics cards, visit ht-
tp://autodesk.com/graphicscard/
2 GB (in addition to the 1 GB or above
required for installation)
Hard disk
NOTE Adobe Flash Player is not installed by default. If a version of Flash is not
currently installed on your system, a message is displayed requesting that you
download it from Adobe’s website. If you do not have Internet access, you can
also access the Flash installer on the AutoCAD disc.
UnderstandingAdministrativePermissionRequirements
To install AutoCAD, you must have administrator permissions. You do not
need to have domain administrative permissions. See your system administrator
for information about administrative permissions.
Understanding Administrative Permission Requirements | 5

You do not need administrator permissions to run AutoCAD. You can run the
program as a limited user.
Locating Your Serial Number and Product Key
When you install AutoCAD, you are prompted for your serial number and
product key in the Product and User Information page. The serial number and
product key are located on the outside of the product packaging, or in the
email you received if you downloaded your product. Make sure to have these
available before you install the program so that you don't have to stop in the
middle of the installation.
The serial number must contain a three-digit prefix followed by an eight-digit
number. The product key consists of five digits.
The information you enter is permanently retained with the product. Because
you can't change this information later without uninstalling, take care when
entering the information. To review this product information later, on the
InfoCenter toolbar, click the drop-down arrow next to the Help button (the
question mark). Then click About.
NOTE If you have lost your serial number or product key, contact the Autodesk
Business Center (ABC) at 800-538-6401 for assistance.
6| Chapter 1 Quick Start to Stand-Alone Installation

Avoiding Data Loss During Installation
The AutoCAD installation process may stop if some applications (such as
Microsoft®Outlook®or virus-checking programs) are running. Close all
running applications to avoid possible installation problems and data loss.
Choosing a Language
You can select a different language for installation instructions, and a language
for individual product installations in the same install process.
When you start the installation process, the installer automatically determines
your operating system language. If a supported language is detected, your
install pages are displayed in that language. If you want to change that
language, you select a different one from the installer language list on the first
page of the Installation wizard.
You can also select a language for an individual product by clicking the Select
Language for Individual Products check box on the Select the Products to
Install page, and then selecting a language from the drop-down list.
NOTE Some products may not have multiple languages available at the time of
product release. Additional language packs may be available later for Subscription
customers. Refer to http://autodesk.com/servicesandsupport for the availability of
additional language packs.
Avoiding Data Loss During Installation | 7

Configure Button
During the installation process, you choose either a typical installation (install
the product with default settings), or a customized installation. If you choose
to customize, you start that process in the Review - Configure - Install dialog
box. Select the appropriate product from the drop-down list, and click the
Configure button.
After you click the Configure button, the following dialog boxes and options
are displayed:
■Select the License Type - Stand-Alone license or Network license. If you choose
Network license, you also need to select the license server model - Single,
Distributed, or Redundant.
■Select the Installation Type - Typical or Custom. If you choose a Typical
installation (default settings), the product installs the most common
application features. To see which features are included in a Typical
installation, refer to When performing a Typical installation, what gets
installed? on page 46 If you choose Custom, you select specific features to
install.
■Include a Service Pack - If a service pack is available for your installation,
you can include it.
When you have completed your choices, click the Configuration Complete
button. This takes you back to the Review - Configure - Create dialog box,
where you can review your selections and complete the installation process.
NOTE To get a copy of your settings, select the Copy to Clipboard button.
If you do not wish to make configuration changes on the Review - Configure
- Install page, click Install. Then click Yes, to continue installing using the
typical configuration.
8| Chapter 1 Quick Start to Stand-Alone Installation

Migrating Custom Settings
You can migrate your custom settings and files from previous releases of
AutoCAD (<AutoCAD 2000> through <AutoCAD 2010>). It is recommended that
you migrate custom settings from a previous release right away. This prevents
you from overwriting files or having to keep track of any custom settings you
may make in the new release. Migrating settings overwrites any new settings.
For more details regarding migration, see Migrate Custom Settings and Files
from Previous Releases on page 25.
Installing Multiple or Bundled Products
Some Autodesk packages are comprised of multiple products or are part of
multi-product bundles.
In the Installation wizard, for packages containing multiple products, you can
choose which products and languages you want to install. During the install
process, you are informed whether a copy of the software is already installed.
You are also warned if your system does not meet the minimum system
requirements for the product. Each product name is displayed on its own
tabbed panel; you can configure them individually.
If you purchased a package that is a multi-product bundle, such as an
educational or institutional package, you may have a package that includes
several Autodesk products. For these bundled packages, an Installer disc
contains information for all the products in the package. The Installer disc
helps you install all of the products.
Installing and Running the Product
To use the product, you must install the product, register and activate it, and
then launch it. You must have administrative permissions to install AutoCAD.
Migrating Custom Settings | 9

This section provides instructions for installing and activating AutoCAD for
an individual user on a stand-alone computer. For information about installing
network-licensed or multi-seat stand-alone versions of the program, see the
Network Administrator's Guide.
Installing AutoCAD
The AutoCAD Installation wizard contains all installation-related material in
one place. From the Installation wizard, you can access user documentation,
change the installer language, select a language-specific product, install
supplemental tools, and add online support services.
■Review installation documentation before you install. It is recommended
that you take the time to familiarize yourself with the complete installation
process before you install AutoCAD. You can access PDF versions of the
installation and licensing manuals from the product's Installation wizard
by selecting the Read this Documentation selection, the Documentation
link at the bottom, left pane of the install pages, or through the Help
system.
You can also access PDFs from the product discs by navigating to the
documentation (docs) folder. For late-breaking information, it is also
recommended that you review the product Readme.
NOTE To view or print any files with an extension of .pdf, Adobe®Reader®
must be installed on your computer. If you do not have Adobe Reader, you
can download the latest version by visiting www.adobe.com.
To install AutoCAD using default values on a stand-alone computer
This is the fastest means of installing AutoCAD on your system. Only default
values are used which means it is a typical installation being installed to
C:\Program Files\<AutoCAD>.
1Insert the AutoCAD disc(s) into your computer's drive.
2In the AutoCAD Installation wizard, select a language for the install
instructions or accept the default language. Click Install Products.
10 | Chapter 1 Quick Start to Stand-Alone Installation

3Select the product(s) and the language for the product(s) you want to
install. Click Next.
In order to choose a language for an individual product, you first must
click the Select Language for Individual Products check box, then select
the language from the drop-down list. In some cases, additional languages
may not be available for the products you choose to install.
NOTE Autodesk Design Review 2010 is not installed by default when you
install AutoCAD. It is recommended that you install Design Review if you
need to view DWF or DWFx files. For more information about Design Review,
see Installing Design Review on page 22.
4Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Select your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
5On the Products and User Information page, enter your serial number,
product key, and user information. Review the Privacy Policy from the link
at the bottom of the dialog box. After reviewing, click Next.
Installing AutoCAD | 11

NOTE The information you enter here is permanent and is displayed in the
Help menu on your computer. Because you can't change this information
later without uninstalling the product, make sure you enter the correct
information.
6If you do not want to make configuration changes on the Review -
Configure - Install page, select Install. Then select Yes to continue
installing using the default configuration.
The wizard does the following:
■Uses a Typical installation, which installs the most common
application features. To see which features are included in a Typical
installation, refer to When performing a Typical installation, what
gets installed? on page 46.
■Includes the Express Tools library. The library provides additional
productivity tools.
■Installs AutoCAD to the default install path of C:\Program
Files\<AutoCAD>.
12 | Chapter 1 Quick Start to Stand-Alone Installation

7Click Install.
8On the Installation Complete page, you can choose the following:
View the installation log file If you want to view the installation log
file, its location is displayed.
View the AutoCAD Readme The Readme file is opened from this page
when you click Finish. This file contains information that was unavailable
when the AutoCAD documentation was prepared. If you do not want to
view the Readme file now, clear the check box next to Readme.
NOTE You can also view the Readme file after you have installed AutoCAD.
To install AutoCAD using configured values on a stand-alone computer
With this installation method, you can fine-tune exactly what gets installed
by using the Configure option. You can alter the installation type, the install
path, and the license type. You can also install Material libraries and Tutorial
files.
1Insert the AutoCAD disc(s) into your computer's drive.
2In the AutoCAD Installation wizard, select a language for the install
instructions or accept the default language. Click Install Products.
3Select the product(s) and the language for the product(s) you want to
install. Click Next.
To select a language for an individual product, click the Select Language
for Individual Products check box, then select the language from the
language drop-down list. In some cases, additional languages may not
be available for the products you choose to install.
NOTE Autodesk Design Review 2010 is not installed by default when you
install AutoCAD. It is recommended that you install Design Review if you
need to view DWF or DWFx files. For more information about Design Review,
see Installing Design Review on page 22.
4Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Choose your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
Installing AutoCAD | 13

5On the Products and User Information page, enter your serial number,
product key, and user information. Review the Privacy Policy from the link
at the bottom of the dialog box. After reviewing, click Next.
NOTE The information you enter here is permanent and is displayed in the
Help menu on your computer. Because you can't change this information
later without uninstalling the product, make sure you enter the correct
information.
6On the Review - Configure - Install page, click Configure to make
configuration changes such as installation type, installing optional tools,
or changing the installation path.
7On the Select the License Type page, you can choose to install a
Stand-alone or Network license. Click Next.
8On the Select the Installation Type page, you can choose to make the
following configuration changes:
14 | Chapter 1 Quick Start to Stand-Alone Installation