V. 1.00 MO - Jan. 11, 2008
N/A
Programming
Assistance Button
(Hood Switch
Interrupt)
TACH Threshold: HIGH
TACH Threshold: NORMAL
SIDE VIEW OF MODULE
Data Port (Optional)
1- BLACK ........................ GROUND (
-
)
2- PURPLE
........................... TACH (AC)
3- GREY ................. HOOD SWITCH (
-
)
4- ORANGE ........ BRAKE SWITCH (+)
5- YELLOW ....... PARKING LIGHTS (+)
GREEN ............ 5
th
RELAY
PURPLE............. STARTER
ORANGE
...ACCESSORIES
(Heater Blower Motor)
YELLOW ........... IGNITION
RED ............+12V (Battery)
RED ..............12V (Battery)
PUSH-BUTTON
VALET SWITCH
(Optional on
certain models)
INV-200 Connector
Jumpers for second outputs
(Starter, Ignition, Accessories)
15 AFuse
30 AFuse
30 AFuse
REAR VIEW OF MODULE
WIRING SCHEMATIC
WIRING SCHEMATIC
85
87
(Solenoid Side)
86
30
STARTER WIRE
(Key Side)
IGNITION (+)
N/A
Start Kill Output (-)
87
A
STARTER WIRE
Optional Starter Kill Relay
Optional
programming
port/pager
Optional
programming
port/pager
Starter 2 Jumper
Ignition 2 Jumper
Accessories 2 Jumper
INV-200 CONNECTOR
(Door Lock pulse
inverter)
Data Port
(Optional)
RS-232 Port
N/A
RS-232 Port
N/A
N/A
2. WHITE/PURPLE ........ (
-
) AUX 2 output
3. BLACK/GREEN ......... (
-
)AUX 4 output (left sliding door)
1. GRAY/LIGHT BLUE ... (-) EXTERNAL TRIGGER input
4. BLACK/BROWN ........ (-) AUX 5 output (right sliding door)
5. YELLOW .................... (
-
) PARKING LIGHTS output
2. WHITE/PURPLE ..... (-) AUX 2 output
3. BLACK/GRENN ...... (-) AUX 4 output
4. BLACK/BROWN ..... (-) AUX 5 output
5. YELLOW ................. (-) PARKING LIGHTS
12- YELLOW ..........................
(+) Glow plug input
11- GREY............................... (
-
) Negative Door input
10- WHITE .............................. (
-
) GROUND out when running
9- PURPLE ............................ (
-
) AUX 1 output
8- ORANGE ........................... (
-
) Hand Brakes input
7- WHITE/ORANGE ............... (
-
) Starter kill output
6- BLUE/WHITE .....................
(+) Positive Door input
5- WHITE/GREEN ..................
(
-
) DISARM
4- WHITE/BROWN .................
(
-
) REARM
3- GREEN .............................. (
-
) UNLOCK
2- BROWN ............................. (
-
) LOCK
1- BLUE ................................. (
-
) TRUNK output
LOOP
For Automatic Transmissions :
Cut the yellow loop before plugging
in the module.
Loop
Note: This product supports the Trilogix bypass.
To program the Trilogix bypass to the Autostart remote
starter, please ensure that the Trilogix bypass and the
Autostart starter are powered up simultaneously.
1. GREY/BLUE ............ (-) EXT. TRIGGER
input
