AUTOTERM PLANAR-4DM2-12/24-P User manual

v11.2017
EN
Operation manual
Air heaters
PLANAR-2D-12/24
PLANAR-4DM2-12/24-Р
PLANAR-44D-12/24-GP-Р
PLANAR-8DM-12/24-Р

2
Contents
Introduction ............................................................................................................................................................. 3
Safety Instructions .............................................................................................................................................. .4
Heater Controls .................................................................................................................................................... .5
Kit ................................................................................................................................................................................ 6
Responsibility ......................................................................................................................................................... 6
Automatic Control Features ........................................................................................................................... .6
Maintenance ............................................................................................................................................................ 7
Malfunctions ........................................................................................................................................................... 8
Technical Data and Specifications ............................................................................................................... .9
Production
ADVERS LLC
Novo-Sadovaja str. 106,
443068, Samara, Russia
[phone]
www.autoterm.ru
Sales Departments
AUTOTERM LLC
Trikatas 4, Riga, Latvia, LV-1026
[phone]
[email protected]
www.autoterm-europe.com
Technical Support
AUTOTERM LLC
Trikatas 4, Riga, Latvia LV-1026
[phone]
[email protected]

3
Dear Customer!
Thank you for choosing this heater! We have done everything possible to make this
product meet your requirements, while its quality satisfies the best world standards.
Introduction .
The PLANAR heaters are designed to be used:
to keep the operator cabin warm;
for heating of various confined spaces of vehicles and small ships;
to maintain comfortable room temperatures for a long time.
The heater operates independently of the vehicle engine. The principle of
operation is based on forcing heated air through the heat exchanger system of the
heater.
Please read these instructions carefully to learn about all the functions
of the heater.

4
Safety Instructions .
Installation of the heater and its component parts must be
carried out by specialized organizations approved by the
manufacturer. Installation of the heater must be carried out only
by specialists in accordance with the installation instructions.
Health hazard
The heater may only be used for the purposes specified in this
manual.
Due to the risk of poisoning by exhaust fumes when the heater
is operating, the heater shall NOT be used in vehicles located in
closed and poorly ventilated premises (garages, shops, etc.).
Danger of property
damage
When refuelling the car, the heater shall be switched off.
The heater power shall not be disconnected until the end of
the purge cycle.
Any electrical connections or disconnections of the heater
shall NOT be carried out while the power is ON.
Do not step or put any items on the heater.
Do not put any garments, pieces of fabric, etc., on the heater, nor
place them in front of the intake or output of heated air.
After turning off the heater, reconnection should be made at
least after 5-10 seconds.
For safe operation of the heater, the customer service should be
contacted to identify and repair malfunction after two
consecutive failed start-ups.

5
Heater Controls .
PU-5ТМ control panel
Heater startup for unlimited duration
Regulation of heater capacity
Regulation of heated air temperature (if the cabin
sensor is installed)
LED indication of heater status
PU-22TМ control panel
Heater startup for unlimited duration
Control by capacity/temperature
Ventilation mode setting
Operation according to one of temperature sensors
Set temperature indication
Actual temperature indication
Malfunction code indication
GSM-modem
Start-up and Shutdown of the heater.
Setting of operation time.
Power Control/Temperature Control.
Setting of ventilation mode.
Temperature indication.
Indication of a selected temperature sensor
Remote Control
Starting the heater for 2 hours.
Heater operation at max. Power Control mode
*—optional part

6
Kit .
The standard kit contains:
-control panel;
-fuel pump;
-fuel tank, fuel intake, tee pipe;
-wire harnesses;
-air intake;
-exhaust pipe;
-fasteners;
-muffler.
Optional (not in scope of supply): a cabin sensor and a GSM modem.
Responsibility
Failure to follow these instructions and the requirements
contained therein results in the exclusion of any liability on the part
of the manufacturer. The same applies to the repair specialist who
does not have the necessary qualifications, or uses non-original parts
without obtaining a permission of the manufacturer.
If you have any problems, we strongly recommend that you contact authorized service
centers, addresses and telephone numbers of which you can find out from the company, the
seller or on the website www.autoterm-europe.com
Automatic Control Features .
1) if for some reason the heater did not start, the start-up process will be automatically
repeated. After two failed attempts the heater will be switched off;
2) if during the heater's operation burning is interrupted, the heater automatically re-starts.
Restarts after consecutive flameouts are performed up to three times;
3) in case of overheating of the heater coil (for example, due to blocked intake or output
of the heating unit), the heater is automatically switched off;
4) if the maximum temperature of the heated air is exceeded (for example, due to closed
outlet of the heating unit), the heater is automatically switched off;
5) if voltage drops below 20V (10V) or increases to more than 30V (16V), the heater
automatically switches off. The numbers in parentheses are for the heaters with the
nominal voltage of 12V;
6) if the heater switches off due to an emergency situation, a malfunction code appears on
the control panel. The malfunction code and the LED indicating the operation mode
will be blinking.
7) in case one of the temperature sensors is faulty, the heater will not launch and a
malfunction code will appear on the control panel.

7
Maintenance .
It is recommended to send the heater for regular maintenance and testing to specialized
service centers.
Many types of repairs and maintenance works on the heater
require professional knowledge and special tools. Improper
maintenance can result in damage to the heater.
We recommend to independently conduct the following services:
If the heater is not in use, it is necessary to operate it once a month for 5-10 minutes,
including the warm season, to ensure reliable operation of the heater.
Regularly check the battery charge.
Before the start of the heating season, check the fuel tank. If the tank stored fuel for a
long time (for example from the past heating season), it is necessary to drain it! Rinse
the tank with gasoline or kerosene and fill it with fresh diesel fuel. This procedure is
designed to remove sediment formed in the fuel during prolonged storage. Failure to
follow this procedure can lead to clogging or failure of the fuel pump and increased
sooting in the combustion chamber.
In case of a long parking or storing the vehicle, disconnect the heater from the power
source (battery) to prevent it from discharging (current consumption of the heater out
of service is (30 ÷ 40) mA).
Reliable operation of the heater depends on the grade of fuel used. F uel grade is
selected depending on ambient temperature.

8
Malfunctions .
Actions in the event of a malfunction.
check for the presence of fuel in the tank and the fuel line downstream of the fuel
pump;
check the 25A fuses;
check for loose connections in connectors and fuse holders (possible oxidation of
contacts);
disconnect the power connector for 1-2 minutes and re-connect it again.
All other problems can be identified by the fault code, which is displayed on the
Controller.
*Attention! If, during start-up and operation of the heater the error message
"Overheating" is repeated 3 times in a row, the heater will be locked. Locking is made
upon actual overheating, regardless of input from the sensors that produced errors. In case
of locking, the controller display will show code 33. To unlock the heater you need to
contact a service center.
We recommend not to wait for the lock of the heater, and immediately after the first
overheating start troubleshooting causes of failure.
Check intake and output of the heating unit for free passage of heated air.
Check the Overheating Sensor on the heat exchanger and replace if necessary.
* - only for the heaters of the PLANAR-8D type.

9
Technical Data and Specifications .
Characteristics
Models
PLANAR–8DM–12–P
PLANAR–8DM–24–P
Rated voltage, V
12
24
Fuel
diesel fuel, depending on the ambient temperature
Heating output, kW:
max
min
max
min
6
3,2
7,5
3,2
Hot air flow, m3/h:
max
min
max
min
175
70
235
70
Fuel consumption, l/h:
max
min
max
min
0,76
0,42
0,9
0,42
Power consumption, W:
max
min
max
min
75
8
90
9
Start-up and Shutdown
manual
Mass, kg, max
12
Characteristics
Models
PLANAR-44D-12-GP-P
PLANAR-44D-24-GP-P
Rated voltage, V
12
24
Fuel
diesel fuel, depending on the ambient temperature
Heating output, kW:
max
min
max
min
4
1
4
1
Hot air flow, m3/h:
max
min
max
min
120
70
120
70
Fuel consumption, l/h:
max
min
max
min
0,514
0,12
0,514
0,12
Power consumption, W:
max
min
max
min
57
10
56
10
Start-up and Shutdown
manual
Mass, kg, max
10

10
Technical Data and Specifications .
Characteristics
Models
PLANAR-2D-12
PLANAR-2D-24
Rated voltage, V
12
24
Fuel
diesel fuel, depending on the ambient temperature
Heating output, kW:
max
min
max
min
2
0,8
2
0,8
Hot air flow, m3/h:
max
min
max
min
75
34
75
34
Fuel consumption, l/h:
max
min
max
min
0,24
0,1
0,24
0,1
Power consumption, W:
max
min
max
min
29
10
29
10
Start-up and Shutdown
manual
Mass, kg, max
10
Characteristics
Models
PLANAR-4DM2-12-P
PLANAR-4DM2-12-P
Rated voltage, V
12
24
Fuel
diesel fuel, depending on the ambient temperature
Heating output, kW:
max
min
max
min
3
1
3
1
Hot air flow, m3/h:
max
min
max
min
120
70
120
70
Fuel consumption, l/h:
max
min
max
min
0,37
0,12
0,37
0,12
Power consumption, W:
max
min
max
min
46,5
10
45
9
Start-up and Shutdown
manual
Mass, kg, max
10