AV Access 4KIP200 User manual

4K HDMI over IP Decoder
User Manual
4KIP200D

Introduction
Introduction
Overview
This product is an AV decoder adopting the latest compression
technology. It supports resolutions up to 3840x2160p@30Hz and can
be controlled by VDirector App (IOS/Android/Windows version),
allowing users to easily build an IP matrix or a video wall through a
tablet/cellphone/PC. With easy-to-use and plug-and-play features, the
decoder that works with the 4KIP200E encoder can be widely used in
sports bars, conference rooms, digital signage, etc.
Features
Works easily with an Ethernet switch, no configuration is required.
Plug and play.
Supports visual control through a tablet/cellphone/PC.
Supports high-efficiency video codec.
Works with 4KIP200E encoder to build an IP matrix or a video wall
easily.
Built-in scaler allows for fast and seamless switching.
Independent RS232 routing.
Package Contents
Before you start the installation of the product, please check the
package contents:
Decoder x 1
Power Adapter (DC 12V 1A) x 1
Phoenix Male Connectors (3.5 mm, 3 Pins) x 2
Mounting Brackets (with Screws) x 2
User Manual x 1

Application
Panel
Info/Source (2s) Key: Short press to display/stop displaying information
of encoder and decoder on screen; press and hold for 2 seconds to link
the decoder to another encoder.
Application
a. 1 – 1: Extender
b. 1 – n: Splitter
c. m - n: Matrix/Video Wall
Take IOS version for example, to configure matrix and video wall,
perform the following:
1) Scan the QR code on the right or visit Apple App
Store to search, download and install VDirector

Application
App with your iPad. (Note: To get Android version, please visit
Google Play Store; to get Windows version, please visit
www.avaccess.com)
2) Connect all encoders, decoders and the wireless router to the
network switch according to the following diagram shown:
3) Configure the wireless router properly, then connect your iPad
to the Wi-Fi network. Launch VDirector on iPad, it will start
searching for online devices, and the following main screen
will appear:
No.
Name
Description
1
Logo
This logo can be changed to a new one.
2
System
Configuration
Button
Click this button to enter system configuration page for the
functions: 1) Naming and Sequencing; 2) Video Wall
Settings; 3) Advanced Settings; 4) System Information.
3 RX List Shows the list of online RX devices, including single device
and devices for video walls.

Specifications
No.
Name
Description
4 RX Preview Shows the live preview of current RX assignments.
5
TX List
Shows the IP stream's live preview from TX device.
6 To All Screens Drag a TX from TX list over this button means the switching
of this TX to all RX devices in RX list, including video walls.
7 Display On/Off Display On: Turn on all RXs' displays.
Display Off: Set all RXs’ displays to standby state.
Specifications
Video
Input Port
1 x LAN
Input Resolutions
up to 3840x2160p@30Hz
Output Port
1 x HDMI
Output Resolutions
up to 3840x2160p@30Hz
Audio
Input Port
1 x LAN
Output Port
1 x HDMI, 1 x Audio Out
Audio Format
MPEG4-AAC Stereo
Control
Control Method
VDirector App (IOS/Android/Windows Version)
General
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C), 10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C), 10% ~ 90%, non-condensing
Power Supply
DC12V 1A / PoE
Power Consumption
DC12V: 3.6W (Max) | PoE: 4.4W (Max)
ESD Protection
Human body model:
±8kV (air-gap discharge)/±4kV (contact discharge)
Dimensions (W x H x D)
175mm x 25mm x 100.2mm/ 6.9'' x 0.98'' x 3.9''
Net Weight
0.60kg/1.32lbs

Warranty
Warranty
Products are backed by a limited 1-year parts and labor warranty. For the
following cases AV Access shall charge for the service(s) claimed for the
product if the product is still remediable and the warranty card becomes
unenforceable or inapplicable.
1. The original serial number (specified by AV Access) labeled on the
product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired,
dismantled or altered by anyone that is not from an AV Access
authorized service partner. The defects are caused by the fact that the
product is used or handled improperly, roughly or not as instructed in
the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to
accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not
covered by normal contract.
6. AV Access preserves the right for interpretation of these cases above and
to make changes to them at any time without notice.
Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails:
General Enquiry: [e-mail]
Customer/Technical Support: [e-mail]