Avadesign DP-201 User manual

www.avadesign.com.tw
DP-201
Outdoor SIP IP Video Door Phone

1
WELCOME
Congratulations on purchasing the V-Bell DP-201 Outdoor SIP IP Video Door Phone. This
door phone is suitable for all your business, and home, door entry communication needs. The
DP-201 Outdoor SIP IP Video Door Phone connects to your computer network and allows
either peer to peer (P2P) calls (calls direct to an IP address of another VoIP device) or calls to
another number via the SIP server, moreover, it is easily to setup and configuration via a web
browser.
Manual version V1.1 01-09-2016
Avadesign Technology Co. Ltd.
4F.-10, No.351, Sec. 2, Zhongshan Rd.,
Zhonghe Dist., New Taipei City 23504,
Taiwan R.O.C.
www.avadesign.com.tw

2
Table of Contents
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .. . . 4
Chapter 2 Quick Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 5
2.1 Open carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2 What else you need. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.3 Hardware Overview. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.4 Wiring and embedded installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . .. . . . . . . . . . . . . . . . . .6
2.5 Access Cloud Service. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Chapter 3 Full web configurations . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .8
3.1 Enter web configure page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2.1 Device Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 8
3.2.2 Service Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Service . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 9
3.3.1 SIP . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3.2 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 10
3.3.3 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3.4 RTSP Server .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.3.5 Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4 Devices . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.4.1 Volume Control .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 13
3.4.2 Camera .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . 13
3.4.3 RFID.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 14
3.4.4 Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 15
3.4.5 Event. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 15
3.5 System .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 16
3.5.1 Network .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.5.2 Date & Time .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.5.3 Maintenance .. . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .. . . . . . . . . . . . . . 19
3.5.3.1 Upgrade DP-201 Firmware .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 19
3.5.4 Reset .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . .. . 19
3.5.5 Reboot .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 20

3
3.5.6 Language .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 20
Chapter 4 How to find the IP address of your DP-201 Door Phone. . . . . .. . . . . . . . . . . 22

4
Chapter 1 Introduction
DP-201 SIP IP door phone with flush mount and water proof, run on the Internet and provide
more services for access control system, is coming soon. It can be combined with IP Phone
as a tool to open the door. It can also be combined with a smartphone (supported both iOS
and Android system) as a tool to open the door. Let users no longer limited by time and place.
No matter where you are, can talk with visitors who at your door and remote open the door for
visitors.
The DP-201 outdoor SIP IP video door phone adopts VoIP SIP protocol, and supports SIP
register mode and peer to peer mode. It can work with most modern IP-PBX such as
Asterisk...etc. It also allows users make a call by inputting the IP address of the call receiver
directly. No IP-PBX is needed, which saves the cost for the system implementation.
The DP-201 outdoor SIP IP video door phone is a new, elegant video door intercom with a
compact shape and waterproof rain cover that has an easy-to-install embedded mount. There
is a call button to call five numbers of simultaneous calls. It is available with a built-in IP
camera supporting up to 720P high density resolution video, can display clearer image, and
provides card reader function.
1.1 Features
COMS 1280 x 720 HD Camera Sensor
Lens : 112 degrees Wide Range Video View angle
Support VoIP SIP (FRC3261) protocol
Support RTSP Protocol
Supports SIP Registered mode and P2P mode
Support H.264 , Motion-JPEG Video codec
Support G711u, AAC voice codec
By WEB browser to watch the video
Supports Auto-answer
Water proof Level: IP54
Infrared fill light
Embedded mount
Build-in One Relay output ( control door lock or Lighting )
Build-in One DI port ( for Door sensor, PIR, Emergency button )
Build-in RFID MiFare Card Reader
Aluminum brushed metal panel

5
Chapter 2 Quick Install
The V-Bell DP-201 Outdoor SIP IP Video Door Phonerequires minimal configuration for a
typical installation.
2.1Open carton
Open the carton and take out the DP-104 Door Phone. Your package should include:
One DP-201 Outdoor SIP IP Video Door Phone
One DI/DO cable
One fixing screw
One Quick Installation Guide
If items are missing or damaged, notify your Avadesign representative. Keep the carton
and packing material.
2.2 What else you need
One RJ-45 cable
2.3 Hardware Overview
Each part of the V-Bell DP-201 Outdoor SIP IP Video Door Phone is described as
shown below.
Housing
MiFare RFID card reader
Call button
Speaker
Fixing Screw
Infrared ray
lights
Red Light:
Ring and Call
status Indicator
Green Light:
Power and
Network status
Indicator
720P, HD Camera
Metal brushed
aluminum panel

6
2.4 Wiring and embedded installation
Step 1: Select a location; open a rectangular hole with dimensions 80X140mm on the wall
that shown as below. Embed the housing of DP-201 into the rectangular hole on
the wall.
Step 2: Then mount the body of DP-201 into the housing.
Step 3: Connect RJ-45 cable and power supply to DP-201.
Step 4: Fix the DP-201 door phone on the wall using a fixing screw.
140mm
80mm
Housing
For Power cable
DI/DO Cable
Fixed Screw
RJ-45 port

7
2.5 Access Cloud Service
The DP-201 will access the cloud service directly and start to work automatically.
Now, you can test the DP-201. The DP-201 allows entry with the simple press of a key.
Caller at the front door and press “CALL” button, person inside the building can talk to
callers, look at caller, then open the door.
VBell Service
The VBell Service is the cloud service and free charge that provided byAvadesign
Technology for the DP-201 application.

8
Chapter 3 Full Web Configurations
You can login the web configure page of DP-201 to set up your DP-201 Outdoor SIP IP video
door phone.
3.1. Enter web configure page
Default network settings of the DP-201 is DHCP, when unable to obtain an IP, the IP will
be temporarily fixed at 192.168.1.100, type http://192.168.1.100 in the address bar and
press Enter. The screen is shown as follows.
Login page
Please input with username: admin and password: admin then click “Login”button on
the screen.
Web configuration consists of left menu bar for major function categories and displays
detailed setting for each function as clicks.
Status
Service
Device
System
The various configuration menus are explained below.
3.2 Status
3.2.1 Device Info
Then you can see the screen as below which show the device information:
Status —Device Info
DP201

9
Firmware version of the above screen will be updated with change over time, please go to
http://220.135.186.178/dp201/firmware/download.html to download the latest version and
read its content. You also can refer to this manual about firmware upgrade described in
Section 3.5.3.1.
3.2.2 Service Status
You also can see the service status as below:
Status —Service Status
3.3 Service
3.3.1 SIP
Now you can select “service” in the first level of menu then click on “SIP”bar in the
second level of menu to register your DP-201 Outdoor SIP IP video door phone to SIP
server.
Disable Cloud Service. And input your data to each fields.
When you have finished the input data of each field, clicking on “save” button on the

10
screen to save your registration data. The screen is shown as follows.
Service —SIP
If you would like to make SIP transport, local port…and so on advance setup, please
move the cursor to the arrow sign which at the end of “Advanced Settings” and click the
left button of your mouse. Then you can input data for advance setting as above.
3.3.2 Calls
Next step, you can setup the ring time and call duration for outgoing calls of the DP-201
Outdoor SIP IP video door phone by clicking on “Phone→Calls” bar in the second level
of menu. You also can input a DTMF code to unlock the door that shown as follows.

11
Service —Calls
3.3.3 Video
You can setup the resolution of image, video frame rate and video quality for the live
video of IP camera of the DP-201 Outdoor SIP IP video door phone that shown as
follows. Please remember that after you change its data, the system need to reboot.
Service —Video

12
3.3.4 RTSP Server
The Real Time Streaming Protocol (RTSP) enables you to watch live video from
DP-201 Outdoor SIP IP video door phone connected to the RTSP server.
Now you can enable RTSP server by clicking on “RTSP Server” bar in the second level
of menu for real-time watching who is at your door. Please remember that after you
change its data, the system need to reboot.
Service —RTSP Server
3.3.5 Web Server
If you would like to change the account name and password, please click on “web server”
bar in the second level of menu as follows.
Service —Web Server

13
3.4 Devices
3.4.1 Volume Control
If you would like to adjust the volume of speaker and microphone, please select “device”
in the first level of menu and click on “Volume Control”bar in the second level of menu
as follows: Device —Volume Control
3.4.2 Camera
If you would like to adjust the brightness and contrast of IP camera of the DP-201
Outdoor SIP IP video door phone, please select “device” in the first level of menu and
click on “Camera”bar in the second level of menu. You also can decide to open or close
the light of the camera LED that shown as follows:
Device —Camera

14
3.4.3 RFID
DP-201 supports RFID reader for MiFare. Therefore the MiFare card can connect to
DP-201 device. There is a unique ID for RFID card and can NOT be revised and copied.
Because of this characteristic, user can apply it as a recognizable identify.
Users can input 100 ID into the memory of DP-201 on web configure page. When the
read ID number and the ID number which in the memory match, user can open the door.
Now we describe how to do RFID (Radio Frequency Identification) set up here. Please
select “device” in the first level of menu and click on “RFID”bar in the second level of
menu as follows:
Device —RFID (For RFID Setting)
Step 1: You can set up the RFID device through Web Configure which provides by Avadesign.
Step 2: After log in Web Configure page, you will see the interface as above diagram and you
can place your card on the sensor area of DP-201 more than 2 seconds and the card
number will be shown on A zone and B zone after device read card. If you would like
A zone
B zone
C zone
Select “RFID Authentication” for step 2.

15
to set up ID identified, choose the card number from B zone and transfer to C zone.
Also you need to select RFIDAuthentication. Then the card owner which is in C zone
can open the door. Now, you finish the setting procedure.
Step 3: You also can check history to realize which card pass in RFID log because it could
recode last 100 unit data
3.4.4 Relay
This feature allows you to set relay timer as shown below:
Device —Relay
3.4.5 Event
This feature allows you to set up event as shown below:

16
DP-201 can be used to integrate other applications, you can also specify the card
ID transmitted to a remote server by key in your service IP to API URL (GET): http:// via
HTTP protocol and response data by the server to determine whether open the door or
not.In this step, please don’t select RFID Authentication.
3.5 System
3.5.1 Network
The network settings can be found in the menu “Network“. Depend on different network
environment for each user. You can go to “System” item in the first level of menu and
click on “Network” bar in the second level of menu to define the type of your network.
DP-201 Outdoor SIP IP video door phone supports Ethernet and PPPoE. Ethernet is the
most widely-installed local area network (LAN) technology. The Point-to-Point Protocol
over Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside
Ethernet frames.

17
If you click Ethernet, please choose DHCP or Static IP that shown as below. The
Dynamic Host Configuration Protocol (DHCP) is a standardized network protocol used
on Internet Protocol (IP) networks for dynamically distributing network configuration
parameters, such as IP addresses for interfaces and services.
System —Network —Ethernet —DHCP
System —Network —Ethernet —Static

18
System —Network —PPPoE
3.5.2 Date & Time
You can set up the date and time of the DP-201 Outdoor SIP IP video door phone by
manual or NTP (Network Time Protocol) server. If you choose to setup the date and
time by manual, please input data for “Date”, “Time”, and “Time-zone”fields then click
on the button of “synchronize with client”.
If you would like to synchronize the time automatically, please enable the NTP server
that shown as below.
System —Date & Time

19
3.5.3 Maintenance
3.5.3.1 Upgrade DP-201 Firmware
Before you select “System”in the first level of menu and click on “Maintenance”bar in
the second level of menu to make new configuration, you need to download the
firmware file of the DP-201 Outdoor SIP IP video door phone. Please visit
http:/220.135.186.178/dp201/firmware to download the firmware file and save in your
computer.
During upload the file for configuration, please keep the power supply is connect to
plug-in. After the upgrade is complete, please check and confirm the firmware version
has changed. System —Maintenance
3.5.4 Reset
You can select “System”in the first level of menu and click on “Reset”bar in the second
level of menu to recover the default setting. Please refer to the following diagram.
p.s. This operation will reboot the system after resetting.