Avadesign V-Bell DP-104 SIP IP User manual

w w w . a v a d e s i g n . c o m . t w
2014
Installation and User Guide

1
WELCOME
Congratulations on purchasing the V-Bell DP-104 SIP IP Video Door Phone. This door phone
is suitable for all your business, and home, door entry communication needs. The DP-104
SIP IP Video Door Phone connects to your computer network and allows either peer to peer
(P2P) calls (calls direct to an IP address of another VoIP device) or calls to another number
via the SIP server, moreover, it is easily to setup and configuration via a web browser.
Manual version V1.26 25-12-2014
Avadesign Technology Co. Ltd.
4F.-10, No.351, Sec. 2, Zhongshan Rd.,
Zhonghe Dist., New Taipei City 23504,
Taiwan R.O.C.
www.avadesign.com.tw

2
Table of Contents
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .. . . 4
Chapter 2 Quick Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 5
2.1 Open carton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2 What else you need. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.3 Wiring and mounting on the wall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .. . . . . . . . . . . . . . . . . .5
2.4 Plug in. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.5 Access Qualia Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 3 Full web configurations . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .8
3.1 Register to SIP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1.1 Enter web configure page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2.1 Device Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 9
3.2.2 Service Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Service . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 10
3.3.1 PhoneSIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.3.2 PhoneCalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 11
3.3.3 Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3.4 Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4 Devices . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.4.1 Volume Control .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 13
3.4.2 Camera .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . 13
3.4.3 RFID.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 14
3.5 System .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 14
3.5.1 Network .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.5.2 Date & Time .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.5.3 Maintenance .. . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .. . . . . . . . . . . . . . 17
3.5.3.1 Upgrade DP-104 Firmware .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 17
3.5.4 Reset .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 18
3.5.4.1 How to return to default setting for your DP-104 SIP IP video door phone? . . . . . . . .. . . . 18
Chapter 4 How to find the IP address of your DP-104 Door Phone. . . . . .. . . . . . . . . . . 19

3
Chapter 5 DI/DO of DP-104 SIP IP video door phone instruction . . . . . .. . . .. . . . . . . . . . 22
Chapter 6 Mechanical dimensions . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 7 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4
Chapter 1 Introduction
The DP-104 SIP IP Video Door Phone is a new, elegant video door intercom with a compact
shape that has an easy-to-install surface mount. It works with SIP based phone systems and
is compatible with most modern IP-PBX systems supporting both audio and video.
If you want to identify who is at your door before you answer the phone or before letting them
in, then the door phone is available with a built-in IP camera supporting up to 1280 x 720 HD
video. This video can be viewed in a web browser and shows real-time video on a PC or on a
mobile phone/tablet that supports iOS and Android.
The DP-104 SIP Video Door Phone allows entry with the simple press of a key. It is great for
unattended lobbies, front doors, gates, warehouse doors, or anywhere visitors may require
assistance. Therefore, it is equally suited for commercial, residential, or public facilities.
1.1 Features
COMS 1280 x 720 HD Camera Sensor
Support H.264 , Motion-JPEG Video codec
Super High-Performance Echo Cancellation technology
The shortest voice delay (below 1~0.5 second)
Support VoIP technology and SIP (FRC3261) protocol
Support SIP Register mode and Peer to Peer mode
Compatible with most modern IP-PBX systems
Support most SIP Client compatibility
Support RTSP Protocol
Build-in One Relay output port (control door lock or siren)
Build-in One DI port ( for Door sensor, PIR, Emergency button)
COMS 1280 x 720 HD Camera Sensor
Lens : 112 degrees Wide Range Video View angle
Support G711u, AAC voice codec
Build-in Hardware AEC ( Acoustic Echo Cancellation )
Support Auto-answer
Build-in one Call Button
Build-in RFID Card Reader (optional)
Build-in Power over Ethernet (PoE)(IEEE802.3af ) (optional)

5
Chapter 2 Quick Install
The V-Bell DP-104 SIP IP Video Door Phone requires minimal configuration for a typical
installation.
2.1Open carton
Open the carton and take out the DP-104 Door Phone
Your package should include:
One DP-104 SIP IP Video Door Phone
One Roof for surface-mounted
One Panel for surface-mounted
One DI/DO cable
One connector
Three screws
If items are missing or damaged, notify your Avadesign representative. Keep the carton and
packing material.
2.2What else you need
One external power adapter: OUTPUT: DC 12V 1.0A
One RJ-45 cable
p.s. You also can buy the power adapter from Avadesign Technology Co., Ltd. This is an
optional item.
2.3Wiring and mounting on the wall:
Select a location, Surface-mount the DP-104 Door Phone at desired location.
Feed the Ethernet cable through the cable square hole which dimensions 35 x 35mm shown
as below:

6
Fix the door phone on the wall using a roof or a panel and two screws as shown the diagrams
below:
or
Fig. 1 Mounting on the wall with Roof Fig. 2 Mounting on the wall with Panel
You can fix the DP-104 IP video door phone on the roof/panel with a screw.
2.4Plug in
Connect RJ-45 cable and power supply to the DP-104 SIP IP video door phone. Then plug into an
available outlet.
35mm
35mm
DC 12V 2.0A
Power supply
RJ-45 Cable, connect to the DP-104
Screw
One screw

7
Rear view of the DP-104
2.5 Access Qualia service
The V-Bell DP-104 SIP IP Video Door Phone will access the Qualia service directly and start to
work automatically.
Now, you can test the DP-104. The DP-104 SIP IP Video Door Phone allows entry with pressing a
key. Caller at the front door and press “CALL” button, person inside the building can talk to callers,
look at caller, then open the door.
RJ-45 Cable
Apply DC Power
DC 12V 1.0A
The Qualia service
The Qualia Service is the cloud service and free charge that provided byAvadesign Technology
for the DP-104 SIP IP Video Door Phone application.
The polar of power line:
Red line is for positive (+)
Black line is for negative (-)

8
Chapter 3 Full Web Configurations
3.1 Register to SIP server
3.1.1 Enter web configure page
When you register the DP-104 door phone to SIP server, please open your chrome browser and
type an IP address. We suggest user can use IP finder utilities to find out the IP address of your
new DP-104 SIP IP video door phone that described as chapter 4 of this manual at page 18~20.
For example: type http://192.168.1.xx of the DP-104 door phone in the address bar and press
Enter. The screen is shown as follows.
p.s. If DHCP fail, please go to the default IP 192.168.1.100 for advance application.
Please input with username: admin and password: admin then click “Login”button on the
screen. Login Page
Please key in 192.168.1.xx of your DP-104 SIP IP Video Door Phone
User can choose either Qualia service or register to SIP server which is accessed via
a web browser.

9
Web configuration consists of left menu bar for major function categories and displays detailed
setting for each function as clicks.
Status
Service
Device
System
The various configuration menus are explained below.
3.2 Status
3.2.1 Device Info
Then you can see the screen as below which show the device information:
Status —Device Info
3.2.2 Service Status
You also can see the service status as below:

10
Status —Service Status
3.3 Service
3.3.1 Phone SIP
Now you can select “service” in the first level of menu then click on “Phone -> SIP”bar in the
second level of menu to register your DP-104 SIP IP video door phone to SIP server.
Disable Qualia Service. And input your data to each fields.
You can click on “Add”button to add more dial button for use.
When you have finished the input data of each field, clicking on “save” button on the screen to
save your registration data. The screen is shown as follows.
Service —Phone SIP

11
If you would like to make SIP transport, local port…and so on advance setup, please move the
cursor to the arrow sign which at the end of “Advanced Settings” and click the left button of your
mouse. Then you can input data for advance setting as below:
3.3.2 Phone Calls
Next step, you can setup the ring time and call duration for outgoing calls of the DP-104 SIP IP
video door phone by clicking on “Phone->Calls” bar in the second level of menu. You also can
input a DTMF code to unlock the door that shown as follows.
Service —Phone Calls
3.3.3 Streaming
The Real Time Streaming Protocol (RTSP) enables you to watch live video from DP-104 SIP
IP video door phone connected to the RTSP server.

12
Now you can enable RTSP server by clicking on “Streaming” bar in the second level of menu
for real-time watching who is at your door. You also can setup the resolution of image, video
frame rate and video quality for the live video of IP camera of the DP-104 SIP IP video door
phone that shown as follows.
Service —Streaming
3.3.4 Web Server
If you would like to change the account name and password, please click on “web server” bar in
the second level of menu as follows.
Service —Web Server

13
3.4 Devices
3.4.1 Volume Control
If you would like to adjust the volume of speaker and microphone, please select “device” in the
first level of menu and click on “Volume Control”bar in the second level of menu as follows:
Device —Volume Control
3.4.2 Camera
If you would like to adjust the brightness and contrast of IP camera of the DP-104 SIP IP video
door phone, please select “device” in the first level of menu and click on “Camera”bar in the
second level of menu. You also can decide to open or close the light of the camera LED that
shown as follows: Device —Camera

14
3.4.3 RFID
We describe how to do RFID (Radio Frequency Identification) set up here. Please select “device”
in the first level of menu and click on “RFID”bar in the second level of menu as follows:
Device —RFID
Short Event: User place his/her card in the sensor zone of DP-104 IP door phone less than 2
seconds then execution.
Long Event: User place his/her card in the sensor zone of DP-104 IP door phone more than 2
seconds then execution.
API URL (GET): The open door http API of DP-104 IP door phone is
http://127.0.0.1/DP104/doorunlock.ncgi?id=$CARDID
You do NOT need to input card number. And no card number saves in the
DP-104 SIP IP video door phone.
3.5 System
3.5.1 Network
The network settings can be found in the menu “Network“. Depend on different network
environment for each user. You can go to “System” item in the first level of menu and click on
“Network” bar in the second level of menu to define the type of your network.
DP-104 SIP IP video door phone supports Ethernet and PPPoE. Ethernet is the most
widely-installed local area network (LAN) technology. The Point-to-Point Protocol over
Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside Ethernet frames.
If you click Ethernet, please choose DHCP or Static IP that shown as below. The Dynamic Host
Configuration Protocol (DHCP) is a standardized network protocol used on Internet Protocol (IP)
networks for dynamically distributing network configuration parameters, such as IP addresses

15
for interfaces and services.
System —Network —Ethernet —DHCP
System —Network —Ethernet —Static

16
System —Network —PPPoE
3.5.2 Date & Time
You can set up the date and time of the DP-104 SIP IP video door phone by manual or NTP
(Network Time Protocol) server. If you choose to setup the date and time by manual, please
input data for “Date”, “Time”, and “Time-zone”fields then click on the button of “synchronize with
client”.
If you would like to synchronize the time automatically, please enable the NTP server that
shown as below. System —Date & Time

17
3.5.3 Maintenance
3.5.3.1 Upgrade DP-104 Firmware
Before you select “System”in the first level of menu and click on “Maintenance”bar in the
second level of menu to make new configuration, you need to download the firmware file of
the DP-104 SIP IP video door phone. Please visit http:/220.135.186.178/dp104/firmware to
download the firmware file and save in your computer.
During upload the file for configuration, please keep the power supply is connect to plug-in.
After the upgrade is complete, please check and confirm the firmware version has changed.
System —Maintenance

18
3.5.4 Reset
3.5.4.1 How to return to default setting for your DP-104 SIP IP video door phone?
DP-104 SIP IP video door phone provides two different methods to recover the default setting
for user.
(1) For resetting device to default settings plug in and hold CALL button at the front panel of
DP-104 until the camera LED flash quickly about 5 seconds then release the button. The
DP-104 IP video door phone will restart automatically and return to default setting.
(2) For the version of v1.1.1411060 late, you can select “System” in the first level of menu
and click on “Reset” bar in the second level of menu to recover the default setting that
shown as following diagram.
System —Reset
CALL button
Camera LED

19
Chapter 4 How to find the IP address of your DP-104 SIP IP Video Door Phone
If find out the IP address of DP-104 SIP IP video door phone is difficult for you, please open the web
browser and type http:// 220.135.186.178/dp104/utilities/ in the address bar and press Enter. The
screen is shown as below.
AvaCamFinder.zip is used for your computer. Please click on “AvaCamFinder.zip “and download
the file to your PC or Notebook. Then install it. The icon will display on the desk of your PC or
Notebook. Click on this icon , you will find the IP address of your DP-104 SIP IP video door
phone shows on the screen as follows.
Used for PC
Used for iOS devices
Used for Android devices