Avancer AVBUBLVAA User manual

1
AVBUBLVAA
BULLET MINI-BLENDER 350W

2
PACKAGE CONTENTS
In the box
Mini Blender 350W
5 Tall cups
1 Short cup
2 Bases with Flat or Cross Blades
2 Shaker Tops
2 Stay Fresh resealable lids
4 Comfort Lip rings
6 Bonus Gaskets
Instruction Manual
IMPORTANT SAFEGUARDS
Signal Word Definitions
DANGER –Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious
injury. Usage of this signal word is limited to the most extreme situations.
WARNING –Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION –Indicates a potentially hazardous situation, which, if not avoided, may result in minor/moderate
injury or product/property damage. It also alerts against unsafe practices.
For your own safety read the following instructions carefully before attempting to connect this unit to
main power:
You should only plug the appliance into a 220V-240VAC, 50Hz supply. Connecting it to other power sources
will damage the appliance.
Always follow basic safety precautions when using electrical products, especially when children are present.
WARNING: To avoid the risk of electrical shock, always make sure the product is unplugged from the
electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard. Never move the device by pulling on the power cable.
4. This appliance is intended to be used in household and similar applications such as:
–staff kitchen areas in shops, offices and other working environments;
–farm houses;

3
–by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments.
5. For additional protection, we recommend the use of a power outlet with a rated current of 10A. To
avoid circuit overload, do not operate another high wattage appliance on the same circuit
6. Never use the device when it does not function properly, shows damage or in the event it has been
dropped.
7. Only qualified experts may perform repair and maintenance work on the device using original
replacement and accessory parts. Never attempt to repair the device yourself.
8. Do not leave the product unattended while in use. Always unplug the product from the electrical
outlet when not in use.
9. Keep the Power Cord and product away from heated surfaces.
10. Do not place product base in or expose it to water or other liquids.
11. The use of attachments, including canning jars, not recommended by the manufacturer may cause a
risk of injury to persons.
12. Handle the Blades with care as they are extremely sharp. Use caution when attaching or detaching
the Blades.
13. Do not touch moving parts (e.g., the Blades) while the product is in use. Keep hands and utensils
away from the moving blades while operating the product.
14. Before disassembling the product, unplug it from the electrical outlet and ensure the Metal Shaft and
Blades have completely stopped.
15. Do not plug or unplug the product into/from the electrical outlet with a wet hand.
16. Unplug the product from the electrical outlet prior to putting on or removing parts.
17. Never operate this product if it has a damaged Power Cord or plug, is not working properly, has been
dropped or damaged, or if the Base has been exposed to water or other liquids.
18. Check that the control is OFF before plugging cord into wall outlet. To disconnect, turn the control
to OFF, then remove plug from wall outlet
19. Do not place on or near a hot gas or electric burner or in a heated oven.
20. Do not allow the Power Cord to hang (e.g., over the edge of a table or counter) where it may be
tripped over or pulled.
21. Always place the product on a flat, level, stable surface.
22. This product is intended for indoor, non-commercial, non-industrial, household use only. Do not
use outdoors.
23. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
24. Always operate blender with cover in place.
25. Do not blend hot liquids.
26. Be certain cover is securely locked in place before operating appliance.
27. Do not attempt to defeat the cover interlock mechanism.
Unused electrical products should not be disposed of with household waste. Check with your local authority
to find out where you can take your product to be properly recycled.
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
Any servicing should be performed by an authorized service representative.

4
ELECTRIC REQUIREMENTS
Voltage: 220-240V.A.C Hertz: 50Hz Power Output: 350W
PREPARATION
Before connecting your Avancer Bullet Blender to a power point, check that you are connected to 220-240V
AC 50Hz main power, which is the standard in Australian households.
Assembly
Important Notices prior to using
NOTE: Before using the product for the first time, disassemble and thoroughly wash and dry all parts
except the Base (Pitcher, Pitcher Lid, Juice Extractor Screen, Plunger, both sets of Blades, Rubber Gasket,
Mugs, Comfort Rings, Small Cup, Large Cup, and Lids).
WARNING:Ensure the product is unplugged from the electrical outlet before assembling it. Handle the
Blades with care as they are extremely sharp. Use caution when attaching, detaching, cleaning, or storing
the Blades.
CHOPPER:
Attaches to the main body and efficiently chops a variety of fruits, vegetables and meats. If chopping
a large amount of ingredients, divide the food into smaller batches. Chop meat with every piece
weighing not more than 10 gram and overall not more than 100 gram
COFFEE GRINDER
The Blender can be used to grind coffee effectively by using the Flat Blades.
Ensure you do not have more than 100g of Beans. Grinding will take around 15 seconds and may
require a number of cycles to ensure the finest grind.
BLENDER
To operate as a standard blender choose your cup size and appropriate blade for the task.
You can fill the cups up to 300g and it is not recommended to fill completely. Overfilling the Cups
could result in spillage, causing burns and/or property/product damage. Rated capacity not more
than 0.3L is recommended. Blend contents within 30 seconds and stop after 2 minutes. Do not use
continuously for more than 5 seconds at a time.
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a flat, level, stable surface.
3. Fill the Small Cup or the Large Cup with the meat and slice into pieces.
4. Screw the Cross Blades clockwise onto the Small or Large Cup until secure.
NOTE: Ensure that the rubber gasket, located on the inside bottom edge of the blade assembly, is in
place.
5. Turn the Chopper Assembly so that the Blades are on the bottom. Attach the assembled Chopper
by aligning the four tabs on the outside of the Small or Large Cup with the four notches on the top
inner edge of the Base.

5
6. Plug the product into a standard electrical outlet.
7. Press down and turn counterclockwise to begin processing food. To prevent product overheating,
limit continuous operation to five seconds at a time.
8. To stop processing, press down and turn clockwise. Wait until the Blades stop completely before
removing the Cup from the Base or before removing any food contents.
9. Unplug the product from the electrical outlet when it is not in use or is left unattended.
NOTE: This product comes with two Storage Lids to cover the Cups and store any leftovers. This product
comes with a shaker lid to dispense contents such as cheese or bread crumbs and a steamer lid that allows
steam to escape from the contents of the jar.
Cleaning and Maintenance
First read the instructions in the section titled “Important safeguards”
WARNING: To avoid the risk of electrical shock, always ensure the product is unplugged from the
electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it.
WARNING: Handle the Blades with care as they are extremely sharp. Use caution when attaching,
detaching, cleaning, or storing the Blades.
1. Always clean the product immediately after each use.
2. Wash all parts except the Base in warm, soapy water; rinse, and dry thoroughly.
3. Clean the Base by wiping it with a damp cloth. To avoid damage to the product, do not immerse the
Base into water or other liquids or place it in a dishwasher.
4. To avoid damage to the product, do not use abrasive cleaners or scouring pads to clean the product
parts.
5. Reassemble the product before placing it into storage.
6. Store the product in a cool, dry place.
7. Any other servicing should be performed by an authorized service representative.
Warranty
In the event of a problem with your item please contact [e-mail]
This product is guaranteed against manufacturing defects for a period of 1 year.
This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions,
or where the product has been the subject of unauthorised modifications or alterations, or has been the subject
of commercial use.

6
If the Blender is shown to have had an inherent defect present at the time of sale, Avancer will provide you with
a replacement.
According to the Waste Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and
treated. The above symbol on the product or its packaging indicates that this product is not to be handled as normal
household waste but is to be taken to a recycling collection point for electrical and electronic goods. By correctly
disposing of this product you are contributing to the protection of the environment and to the health of your fellow human
beings. Improper disposal endangers health and the environment. Further information about the recycling of the product
may be obtained from your local council, refuse collection department or the store where you purchased the product.