Avanti IM320299 User manual

ICE MAKER COMBO / MAQUINA DE HACER HIELO CON REFRIGERADOR
INSTRUCTION MANUAL / MANUAL DE INSTRUCCIONES
MODEL NUMBER/NUMERODE MODELO: IM3202SS
BEFOREUSE, PLEASE READ AND FOLLOW ALL SAFETYRULES ANDOPERATING
INSTRUCTIONS.
LASECCION EN ESPAÑOLEMPIEZA ENLA PAGINA 17.
AVANTI HAS APOLICY OFCONTINUOUS IMPROVEMENT ONITSPRODUCTSAND RESERVES THE RIGHT TOCHANGE
MATERIALSAND SPECIFICATIONS WITHOUT NOTICE.
AVANTI PRODUCTS,ADIVISION OFTHE MACKLE CO., INC.
P.O. BOX520604 -MIAMI, FLORIDA 33152
WWW.AVANTIPRODUCTS.COM

2
ICE MAKERSAFETY
YOUR SAFETY AND THE SAFETY OF OTHERS AREVERY IMPORTANT.
WE HAVE PROVIDED MANY IMPORTANT SAFETY MESSAGES IN THIS MANUAL AND ON YOUR
APPLIANCE. ALWAYS READ AND OBEY ALL SAFETY MESSAGES.
THIS IS THE SAFETY ALERT SYMBOL. THIS SYMBOL ALERTS YOU TO
POTENTIAL HAZARDS THAT CAN KILL OR INJURE YOU AND OTHERS.
ALL SAFETY MESSAGES WILL FOLLOW THE SAFETY ALERT SYMBOL
AND EITHER THE WARDS”DANGER”, “WARNING”OR “CAUTION”.
DANGER MEANS THAT FAILURE TO
HEED THIS SAFETY STATEMENT MAY
RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
WARNING MEANS THAT FAILURE TO
HEED THIS SAFETY STATEMENT MAY
RESULT IN EXTENSIVE PRODUCT
DAMAGE, SERIOUS PERSONAL INJURY,
ORDEATH.
CAUTION MEANS THAT FAILURETO
HEED THIS SAFETY STATEMENT MAY
RESULT IN MINOR OR MODERATE
PERSONAL INJURY, OR PROPERTY OR
EQUIPMENT DAMAGE.
ALL SAFETY MESSAGESWILL ALERT YOU DO WHAT THE POTENTIAL HAZARD IS, TELL YOU
HOW TO REDUCE THE CHANCE OF INJURY, ANDLET YOU KNOW WHAT CAN HAPPEN IF THE
INSTRUCTIONS ARE NOT FOLLOWED.

3
IMPORTANT SAFEGUIDES
BEFORE THE APPLIANCE IS USED, IT MUST BEPROPERLYPOSITIONED AND
INSTALLED AS DESCRIBED IN THIS MANUAL,SO READ THE MANUAL
CAREFULLY.TOREDUCETHE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY
WHEN USING THE APPLIANCE, FOLLOW BASIC PRECAUTION, INCLUDING
THE FOLLOWING:
?PLUG INTO A GROUNDED 3-PRONG OUTLET, DO NOT REMOVE GROUNDING PRONG, DONOT USE
AN ADAPTER, AND DO NOT USEAN EXTENSION CORD.
?REPLACEALL PANELS BEFORE OPERATING.
?ITISRECOMMENDED THAT A SEPARATE CIRCUIT, SERVING ONLY YOUR APPLIANCEBE PROVIDED.
USE RECEPTACLES THATCANNOTBE TURNED OFF BY A SWITCH OR PULL CHAIN.
?NEVER CLEANAPPLIANCE PARTS WITH FLAMMABLE FLUIDS. THESE FUMES CAN CREATE A FIRE
HAZARD OREXPLOSION. AND DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPO RS
AND LIQUIDS IN THE VICINITYOF THISOR A NY OTHER APPLIANCE.THE FUMES CAN CREATE A FIRE
HAZARD OR EXPLOSION.
?BEFORE PROCEEDING WITH CLEANING AND MAINTENANCE OPERATIONS, MAKE SURE THE
POWER LINEOF THE UNIT IS DISCONNECTED.
?DO NOT CONNECT OR DISCONNECT THE ELECTRIC PLUG WHEN YOUR HANDS ARE WET.
?UNPLUG THE APPLIANCEOR DISCONNECT POWERBEFORE CLEANING OR SERVICING. FAILURE
TO DO SO CAN RESULT IN ELECTRICAL SHOCK OR DEATH.
?DONOT ATTEMPT TO REPAIR OR REPLACE ANY PART OF YOUR APPLIANCE UNLESS IT IS
SPECIFICALLY RECOMMENDED IN THIS MATERIAL. ALL OTHER SERVICING SHOULD BE REFERRED
TO A QUALIFIED TECHNICIAN.
?USE TWO OR MORE PEOPLE TO MOVE AND INSTALL APPLIANCE. FAILURE TO DO SO CAN RESULT
IN BACK OR OTHER INJURY.
?TO ENSURE PROPER VENTILATION FOR YOUR APPLIANCE, THE FRONT OF THE UNIT MUST BE
COMPLETELY UNOBSTRUCTED. CHOOSE A WELL-VENTILATED AREA WITH TEMPERATURES
ABOVE 55?(13?)ANDBELOW 90?(32?). THIS UNIT MUST BEINSTALLED IN AN AREA PROTECTED
FROM THE ELEMENT, SUCH AS WIND, RAIN, WATER SPRAY OR DRIPS.
?THE APPLIANCE SHOULD NOT BE LOCATED NEXT TO OVENS, GRILLS OR OTHER SOURCES OF
HIGH HEAT.
?THE APPLIANCEMUST BE INSTALLED WITH ALL ELECTRICAL, WATER AND DRAIN CONNECTIONS IN
ACCORDANCE WITH STATE AND LOCAL CODES. A STANDARD ELECTRICAL SUPPLY (115 V AC
ONLY, 60 HZ), PROPERLY GROUNDED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE
AND LOCAL CODES AND ORDINANCES IS REQUIRED.
?DO NOT KINK OR PINCH THE POWER SUPPLY CORDOF APPLIANCE.
?THE FUSE (OR CIRCUIT BREAKER) SIZE SHOULD BE 15 AMPERES.
?IT IS IMPORTANT FOR THE APPLIANCETO BE LEVELED IN ORDER TO WORK PROPERLY. YOU MAY
NEED TO MAKE SEVERALADJUSTMENTS TO LEVEL IT.
?ALL INSTALLA TION MUST BE IN ACCORDANCE WITH LOCAL PLUMBING CODE REQUIREMENTS.
?MAKE CERTAIN THAT THE PIPES ARE NOT PINCHED OR KINKED OR DAMAGED DURING
INSTALLATIONS.
?CHECK FOR LEAKS AFTER CONNECTION.
?NEVER ALLOW CHILDREN TO OPERATE, PLAY WITH OR CRAWL INSIDE THE ICE MA KER.
?IF YOU USE THE DRAINAGE CONTAINER, YOU MUST SET THE DRAIN SELECT SWITCH TO OFF OR
THE WATER CAN OVERFLOW FROM THE DRAINAGECONTAINER
?ALTHOUGH THE UNIT HAS BEEN TESTED AT THEFACTORY, DUE TO LONG-TERM TRANSIT AND
STORAGE, THE FIRST BATCH OF CUBES MUST BE DISCARDED.
?DO NOT USE SOLVENT-BASED CLEANING AGENTS OF ABRASIVES ON THE INTERIOR. THESE
CLEANERS MAY DAMAGE OR DISCOLOR THE INTERIOR.
?DO NOT USE THIS APPA RATUS FOR OTHER THAN ITS INTENDED PURPOSE.

4
REGISTRATION INFORMATION
THANK YOU FOR PURCHASING THIS FINE AVANTI PRODUCT. PLEASE FILL OUTTHIS CARD
AND RETURN IT WITHIN100 DAYS OF PURCHASE TO RECEIVE THESE IMPORTANT BENEFITS
AND RECEIVE THESE IMPORTANT BENEFITS TO THE FOLLOWING ADDRESS:
AVANTI PRODUCTS, A DIVISION OF THE MACKLE CO., INC.
P.O. BOX 520604 -MIAMI, FLORIDA 33152 USA
?PROTECT YOUR PRODUCT:
WE WILL KEEP THEMODEL NUMBERAND DATE OF PURCHASE OF YOUR NEW AVANTI
PRODUCTON FILETOHELPYOU REFER TO THISINFORMATION IN THE EVENTOFAN
INSURANCE CLAIMSUCHAS FIREOR THEFT.
?PROMOTEBETTER PRODUCTS:
WE VALUEYOURINPUT. YOURRESPONSES WILL HELPUS DEVELOP PRODUCTS
DESIGNEDTOBEST MEET YOUR FUTURE NEEDS.
-----------------------------------------------------(DETACH HERE)--------------------------------------------------------
AVANTI REGISTRATION CARD
__________________________________ ___________________________________________
NAME MODEL#SERIAL #
______________________________________ ________________________________________________
ADDRESS DATE PURCHASED STORE/DEALERNAME
______________________________________ ________________________________________________
CITY STATE ZIP OCCUPATION
______________________________________ AS YOUR PRIMARY RESIDENCE,DOYOU:
AREA CODE PHONE NUMBER ?OWN ?RENT
DIDYOU PURCHASE AN ADDITIONAL WARRANTY: YOURAGE:
?EXTENDED ?FOOD LOSS ?NONE ?UNDER 18 ?18-25 ?26-30
REASON FORCHOOSING THIS AVANTI PRODUCT: ?31-35 ?36-50 ?OVER50
PLEASEINDICATETHE MOST IMPORTANT FACTORS MARITAL STATUS:
THAT INFLUENCEDYOURDECISIONTOPURCHASE ?MARRIED ?SINGLE
THIS PRODUCT. IS THISPRODUCTUSEDINTHE:
?PRICE ?HOME ?BUSINESS
?PRODUCT FEATURES HOWDIDYOULEARNABOUTTHIS PRODUCT:
?AVANTIREPUTATION ?ADVERTISING
?PRODUCT QUALITY ?INSTORE DEMO ?PERSONALDEMO
?SALESPERSONRECOMMENDATION ?OTHER___________________________________
?FRIEND/RELATIVE RECOMMENDATION COMMENTS________________________________
?WARRANTY ___________________________________________
?OTHER_______________________ ___________________________________________

5

6
HELP US HELP YOU …
READTHISGUIDECAREFULLY.
ITIS INTENDEDTOHELP YOU OPERATE
AND MAINTAIN YOURNEW APPLIANCE
PROPERLY.
KEEPIT HANDYTO ANSWER YOUR
QUESTIONS.
IFYOU DON'T UNDERSTAND SOMETHING
OR YOU NEEDMORE ASSISTANCE,
PLEASE CALL:
AVANTI CUSTOMERSERVICE
800-220-5570
KEEPPROOF OF ORIGINAL PURCHASE
DATE(SUCHAS YOUR SALESSLIP) WITH
THIS GUIDETOESTABLISH THE
WARRANTYPERIOD.
WRITEDOWNTHEMODEL AND SERIAL
NUMBERS.
YOU'LL FIND THEMON APLATE LOCATED
ON THE REAR WALLOFTHE APPLIANCE.
PLEASE WRITETHESE NUMBERSHERE:
____________________________________
DATE OFPURCHASE
____________________________________
MODEL NUMBER
____________________________________
SERIAL NUMBER
USE THESENUMBERS IN ANY
CORRESPONDENCEOR SERVICECALLS
CONCERNINGYOUR APPLIANCE.
IF YOU RECEIVEDADAMAGEDAPPLIANCE,
IMMEDIATELY CONTACTTHEDEALER (OR
BUILDER) THAT SOLD YOU THE
APPLIANCE.
SAVE TIME AND MONEY. BEFOREYOU
CALL FOR SERVICE,CHECK THE
TROUBLESHOOTINGGUIDE. IT LISTS
CAUSESOFMINOR OPERATING
PROBLEMS THAT YOU CAN CORRECT
YOURSELF.
IFYOU NEEDSERVICE
WE'REPROUDOFOUR SERVICEAND
WANTYOU TO BE PLEASED.IFFOR SOME
REASON YOU ARENOTHAPPYWITH THE
SERVICE YOU RECEIVE, HEREARESOME
STEPS TO FOLLOW FOR FURTHER
ASSISTANCE.
FIRST, CONTACT THEPEOPLEWHO
SERVICED YOUR APPLIANCE.EXPLAIN
WHY YOU ARENOT PLEASED.IN MOST
CASES, THIS WILL SOLVE THE PROBLEM.
NEXT,IFYOU ARESTILL NOT PLEASED,
WRITEALL THEDETAILS, INCLUDINGYOUR
TELEPHONENUMBER, ANDSEND ITTO:
CUSTOMER SERVICE
AVANTI PRODUCTS
10880 NW 30TH STREET
MIAMI,FL 33172 USA
CAUTION
:
THIS APPLIANCE IS NOT DESIGNED
FOR THE STORAGE OF MEDICINE
OR OTHER MEDICAL PRODUCTS.

7
PARTS AND FEATURES
1. ICE BUCKET
2. WINE BOTTLE SHELF
3. STRAIGHT SHELF
4. BOTTOM RACK
5. TEMPERATURE CONTROL
6. ON/OFF POWER SWITCH
7. BOTTOM GRILLE
8. DOOR BINS

8
TABLE OF CONTENTS
ICE MAKER SAFETY 2
IMPORTANT SAFEGUIDES 3
REGISTRATION INFORMATION 4
HELP US AND HELP YOU … 6
PARTS AND FEATURES 7
IMPORTANT SAFETY INSTRUCTIONS 9
INSTALLATION INSTRUCTIONS 9
BEFORE USING YOUR APPLIANCE 9
INSTALLATION OF YOUR APPLIANCE 9
ELECTRICAL CONNECTION 10
EXTENSION CORD 10
CONNECTING THE WATER SUPPLY 10
REVERSING THE DOOR SWING OF YOUR APPLIANCE 11
OPERATING YOUR ICE MAKER 11
INTIAL START-UP ICE MAKING OPERATION 11
CARE AND MAINTENANCE 12
CLEANING YOUR APPLIANCE 12
POWER FAILURE 12
VACATION TIME/STORAGE 12
MOVING YOUR APPLIANCE 12
ENERGY SAVING TIPS 12
TROUBLE SHOOTING GUIDE 13
SERVICE FOR YOUR APPLIANCE 14
YOUR AVANTI PRODUCTS WARRANTY 15
WIRING DIAGRAM 16
INSTRUCCIONES EN ESPAÑOL 17~20

9
IMPORTANT SAFETY INSTRUCTIONS
?WARNING?TO REDUCE THE RISKOFFIRE,
ELECTRICAL SHOCK, OR INJURY WHEN
USING YOUR APPLIANCE, FOLLOW THESE
BASIC PRECAUTIONS:
?READ ALL INSTRUCTIONSBEFOREUSINGTHE APPLIANCE.
?DANGEROR WARNING:RISKOF CHILD ENTRAPMENT.
CHILD ENTRAPMENT ANDSUFFOCATION ARENOT PROBLEMS OF THEPAST.
JUNKED OR ABANDONEDAPPLIANCES ARESTILL DANGEROUS...EVEN IF THEY
WILL “JUSTSIT IN THEGARAGE AFEW DAYS.”
?BEFOREYOU THROW AWAYYOURAPPLIANCE: TAKE OFF THE DOORS. LEAVE THE
SHELVES IN PLACE SO THAT CHILDREN MAY NOT EASILY CLIMB INSIDE.
?NEVER ALLOWCHILDRENTOOPERATE, PLAY WITH,OR CRAWL INSIDETHE
APPLIANCE.
?NEVER CLEAN APPLIANCEPARTS WITH FLAMMABLEFLUIDS. THE FUMESCAN
CREATE AFIRE HAZARD OR EXPLOSION.
?DONOTSTORE OR USEGASOLINE OR ANY OTHER FLAMMABLE VAPORS ANDLIQUIDS
IN THE VICINITY OF THIS OR ANYOTHER APPLIANCE. THE FUMESCAN CREATEAFIRE
HAZARDOR EXPLOSION.
-SAVE THESE INSTRUCTIONS-
INSTALLATION INSTRUCTIONS
?BEFORE USING YOUR APPLIANCE
?REMOVE THE EXTERIOR ANDINTERIOR PACKING.
?CHECK TOBESUREYOU HAVE ALLOFTHE FOLLOWINGPARTS:
?1ICE BUCKET
?1WINEBOTTLESHELF
?1STRAIGHTSHELF
?1BOTTOMRACK
?1PLASTIC SCOOP
?25 FEET HOSE
?1INSTRUCTION MANUAL
?BEFORECONNECTINGTHE APPLIANCE TO THEPOWERSOURCE, LETIT STANDUPRIGHT
FOR APPROXIMATELY2HOURS. THISWILL REDUCE THEPOSSIBILITY OF AMALFUNCTION
IN THE COOLINGSYSTEMFROMHANDLINGDURINGTRANSPORTATION.
?CLEAN THEINTERIOR SURFACEWITHLUKEWARMWATERUSINGASOFTCLOTH.
?INSTALLATION OF YOUR APPLIANCE
?THIS APPLIANCE IS DESIGNED TO BE RECESSED OR BUILT-IN (FULLY RECESSED).
?PLACE YOUR APPLIANCE ON AFLOOR THAT IS STRONG ENOUGH TO SUPPORT THE
APPLIANCE WHEN IT IS FULLY LOADED. REMEMBER THAT THE UNIT WILL BE
SIGNIFICANTLY HEAVIERONCEITIS FULLY LOADED.TOLEVELYOURAPPLIANCE, ADJUST
THE LEGS AT THEFRONTOFTHE APPLIANCE.
?LOCATE THE APPLIANCE AWAY FROM DIRECT SUNLIGHT AND SOURCES OF HEAT
(STOVE, HEATER, RADIATOR, ETC.). DIRECT SUNLIGHT MAY AFFECT THE ACRYLIC
COATING AND HEAT SOURCES MAY INCREASE ELECTRICAL CONSUMPTION. EXTREME
COLD AMBIENT TEMPERATURES MAY ALSO CAUSE THE APPLIANCE NOT TO PERFORM
PROPERLY.
?AVOID LOCATING THE APPLIANCE IN MOIST AREAS. TOO MUCH MOISTURE IN THE AIR
WILL CAUSE FROST TO FORM QUICKLY ON THE EVAPORATOR REQUIRING MORE
FREQUENTDEFROSTING OFTHE APPLIANCE.

10
?PLUG THE APPLIANCE INTO AN EXCLUSIVE PROPERLY INSTALLED-GROUNDED WALL
OUTLET. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD. ANY QUESTIONS CONCERNING POWER AND OR
GROUNDING SHOULD BE DIRECTED TOWARD ACERTIFIED ELECTRICIAN OR AN
AUTHORIZEDAVANTI PRODUCTS SERVICE CENTER.
?ELECTRICAL CONNECTION
?THIS APPLIANCE SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER
CORD OF THISAPPLIANCEISEQUIPPED WITH ATHREE-PRONGPLUGWHICHMATES WITH
STANDARDTHREE PRONGWALL OUTLETS TO MINIMIZETHE POSSIBILITYOFELECTRICAL
SHOCK.
?DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG
FROMTHEPOWER CORDSUPPLIED.
?NEVER USEAN EXTENSION CORD TOCONNECT POWERTO THEUNIT.
?NEVER USEATWO-PRONG GROUNDINGADAPTER.
?WHERE ATWO-PRONG WALL RECEPTACLE IS ENCOUNTERED, CONTACT AQUALIFIED
ELECTRICIAN TO HAVE IT REPLACED WITH A3-PRONG RECEPTACLE IN ACCORDANCE
WITH APPLICABLE ELECTRICALCODES.
?THISAPPLIANCEREQUIRES ASTANDARD115/120 VOLTSA.C.~/60HZELECTRICAL OUTLET
WITH THREE-PRONG GROUND.
?THE CORD SHOULD BE SECURED BEHIND THE APPLIANCE AND NOT LEFT EXPOSED OR
DANGLINGTOPREVENT ACCIDENTAL INJURY.
?THE APPLIANCE SHOULD ALWAYS BE PLUGGED INTO ITS OWN INDIVIDUAL ELECTRICAL
OUTLET WHICH HAS A VOLTAGE RATING THAT MATCHES THE RATING LABEL ON THE
APPLIANCE. THIS PROVIDES THE BEST PERFORMANCE AND ALSO PREVENT
OVERLOADING HOUSE WIRING CIRCUITS THAT COULD CAUSE A FIRE HAZARD FROM
OVERHEATED. NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD.
ALWAYS GRIP THE PLUG FIRMLY AND PULL STRAIGHT OUT FROM THE RECEPTACLE.
REPAIR OR REPLACE IMMEDIATELY ALL POWER CORDS THAT HAVE BECOME FRAYED
OR OTHERWISE DAMAGED. DO NOT USE A CORD THAT SHOWS CRACKS OR ABRASION
DAMAGE ALONG ITS LENGTH OR AT EITHER END. WHEN MOVING THE APPLIANCE, BE
CAREFUL NOT TO DAMAGE THE POWER CORD.
?EXTENSION CORD
BECAUSE OF POTENTIAL SAFETY HAZARDS UNDER CERTAIN CONDITIONS, IT IS STRONGLY
RECOMMENDED THAT YOU DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
HOWEVER, IF YOU MUST USE AN EXTENSION CORD IT IS ABSOLUTELY NECESSARY THAT IT
BE A UL/CUL-LISTED, 3-WIRE GROUNDING TYPE APPLIANCE EXTENSION CORD HAVING A
GROUNDING TYPE PLUG AND OUTLET AND THAT THE ELECTRICAL RATING OF THE CORD BE
115 VOLTS AND AT LEAST 10 AMPERES.
?CONNECTING THE WATER SUPPLY
?
WARNING
?
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL
SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED
AVANTI PRODUCTS SERVICE CENTER.
?
WARNING
?
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING
YOU MUST USE A LICENSED PLUMBER
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION

11
?ALL THE NECESSARY HARDWARE IS NOT PROVIDED FOR INSTALLATION SO IT IS
NECESSARY TO HIRE APROFESSIONAL LICENSED PLUMBER TO COMPLETE THE
INSTALLATION.
?CONNECT TUBING (SUPPLIED WITH UNIT) TO THE NEAREST COLD WATER SOURCE.
CONNECT SUFFICIENT TUBING TO THE UNIT TO ALLOW THE APPLIANCE TO BE MOVED
FREELY FOR CLEANING AND SERVICE. ALSO MAKE SURE THAT THE TUBING IS NOT
PINCHED OR DAMAGEDDURINGTRANSPORTATION.
POSITION UNIT TO ALLOW FREE AIRFLOW THROUGH THE FRONTGRILL
(SEESKETCH 1). WIPEOUTINSIDEOFUNITAND ICEBUCKETWITH ADAMP
CLOTH.
?REVERSING THE DOOR SWING OF YOUR APPLIANCE
THIS APPLIANCE HAS THE CAPABILITY OF THE DOOR OPENING FROM EITHER THE LEFT OR
RIGHT SIDE. THE UNIT IS DELIVERED TO YOU WITH THE DOOR OPENING FROM THE LEFT
SIDE. SHOULD YOU DESIRE TO REVERSE THE OPENING DIRECTION, PLEASE CALL
CUSTOMER SERVICE FOR REVERSAL INSTRUCTIONS.
OPERATING YOUR ICE MAKER
?INITIAL START-UP ICE MAKING OPERATION
1. PLUGTHE APPLIANCE INTO A115/120V POLARIZED AND GROUNDED WALL ELECTRICAL
OUTLET.
2. TO PRODUCE ICE, PLACE THE ON-OFF SWITCH, LOCATED ON THE FRONTGRILLE,IN THE
“ON”POSITION.
3. SET THECONTROL TEMPERATUREDIAL TO POSITION 5OR6(MARKEDICE MAKING).
IN THIS UNIT,THECONTROLDIAL ISALSOUSEDFOR SETTINGTHE TEMPERATUREIN THE
ICE MAKERREFRIGERATOR SECTIONUSING POSITIONS1TO4(4 BEING THECOLDEST).
4. MAKE SURE THE WATER SUPPLY IS ON.AS SOON AS THEINNER MECHANISM REACHES
THE PROPER TEMPERATURE, THE ICEMAKER MECHANISM WILL FILL THE MOLD WITH
WATER.
5. THE FIRST CUBES MAY BE SMALL BECAUSE OF AIR IN THE WATER LINE. LATER CUBES
WILL BEOFSTANDARDCRESCENTMOON TYPE SIZE.
6. APPROXIMATE TIME FOR THE FIRST CYCLEIS BETWEEN 30-40 MINUTES.
7. EACH CYCLE APPROXIMATELYWILL TAKE 140 ML OF WATER SO YOU SHOULD HAVE A
FULLTRAY, AFTER 11 HOURS.
IMPORTANT: THROW AWAY ALL ICE CUBES MADE DURING THE FIRST 3HOURS OF
OPERATION.
?WHEN THE ICE BUCKET IS FULL, THE ICE MAKING MECHANISM WILL
AUTOMATICALLY SHUT OFF. HOWEVER THE REFRIGERATION SYSTEM
WILL CONTINUE TOCOOL AND MAINTAIN THE CUBES SUPPLY.
?ICE DELIVERYMAY BEINTERRUPTEDBYRAISINGTHE METAL ARMINTO
AN UPRIGHT POSITION (SEE SKETCH 2)
?IFTHE ICEMAKER ISNOT USED REGULARLY, ITISRECOMMENDED THAT
THE ICEBUCKETBEEMPTIEDPERIODICALLY TO INSURE FRESHICE.
?SOMETIMES THECUBES MAYAPPEAR CLOUDY. THISISCAUSE OF NOCONCERNANDHAS
NOTHING TO DOWITH THE TASTE ORCHEMICAL MAKE-UPOF THE WATER.
?THE FRONTGRILL SHOULD BE KEPT FREE OF DUST ANDLINTTOPERMITFREEAIRFLOW.
?THISUNIT SHOULD BEDEFROSTEDAPPROXIMATELYEVERY 4-6WEEKS OR WHENFROST
ON THE APPLIANCE WALLS IS EXCESSIVE OR ¼” THICK. TO DEFROST, TURN THE UNIT
OFF,REMOVE CUBESANDKEEPDOOR OPEN AT LEAST TWO INCHES.
SKETCH 1
SKETCH 2

12
CARE AND MAINTENANCE
?CLEANING YOUR APPLIANCE
?TURNTHE SWITCH CONTROL TO "OFF",UNPLUG THEAPPLIANCEAND REMOVE BUCKET.
?WASH THEINSIDE WITH AWARMWATERAND BAKINGSODA SOLUTION. THESOLUTION
SHOULDBEABOUT2TABLESPOONS OFBAKING SODA TOAQUARTOFWATER.
?WASH THEBUCKETWITH AMILD DETERGENTSOLUTION.
?THE OUTSIDEOFTHE APPLIANCE SHOULD BECLEANEDWITH MILDDETERGENT AND
WARM WATER.
?THE CONDENSERCOILS SHOULD BE VACUUMED WHEN THEYARE DUSTYOR DIRTY.
CAUTION
FAILURETOUNPLUGTHEAPPLIANCECOULD RESULT IN ELECTRICAL SHOCK OR
PERSONAL INJURY.
?POWER FAILURE
MOSTPOWERFAILURES ARECORRECTED WITHIN AFEW HOURSAND SHOULD NOT AFFECT
THE TEMPERATUREOFYOURAPPLIANCEIFYOU MINIMIZE THENUMBEROF TIMES THEDOOR
ISOPENED.IFTHE POWERIS GOING TO BE OFF FOR ALONGER PERIOD OF TIME, YOU NEED
TOTAKETHE PROPER STEPSTODISCONNECTYOURAPPLIANCE.
?VACATION TIME/STORAGE
1. SHUTOFF WATER SUPPLY AT THEMAIN WATER VALVE.
2. DISCONNECTTHE WATER SUPPLYLINE FROM VALVE.
3. ALLOW UNIT TO RUNFOR ANHOUROR TWOUNTILALL REMAININGICECUBES HAVE BEEN
EJECTED.
4. DISCONNECTUNIT FROMMAIN POWER SOURCE.
5. DRY OUT EXCESS WATERFROMAPPLIANCE ASSEMBLY
6. LEAVE THEDOOR OPEN AT LEAST TWO INCHES.
?MOVING YOUR APPLIANCE
?SECURELYTAPEDOWN ALLLOOSE ITEMS INSIDEYOURAPPLIANCE.
?TURNTHELEVELING SCREWUPTOTHEBASE TOAVOID DAMAGE.
?TAPE THE DOOR SHUT.
?BESURE THE APPLIANCESTAYS IN THE UPRIGHTPOSITION DURING TRANSPORTATION.
?ENERGY SAVING TIPS
?THE APPLIANCE SHOULDBELOCATEDINTHE COOLESTAREAOFTHE ROOM, AWAYFROM
HEAT PRODUCING APPLIANCES OR HEATING DUCTS, AND OUT OF THE DIRECT
SUNLIGHT.

13
PROBLEMSWITH YOUR APPLIANCE?
YOU CAN SOLVE MANYCOMMON APPLIANCEPROBLEMS EASILY, SAVING YOU THE COSTOF
APOSSIBLESERVICE CALL. TRYTHE SUGGESTIONS BELOW TO SEEIFYOU CAN SOLVE THE
PROBLEM BEFORE CALLING THESERVICER.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLECAUSE
APPLIANCEDOESNOT OPERATE. NOT PLUGGEDIN.
THE CIRCUIT BREAKERTRIPPED OR A
BLOWN FUSE.
THE APPLIANCE POWERSWITCH ISSET AT
"0FF".
NOWATER TO THE UNIT.
NOT PRODUCINGICE, UNITNOT COLD
ENOUGH AIRFLOW TO FRONTGRILLE BLOCKED.
THE APPLIANCE ARMISSET TO THEOFF
POSITION.
WATER SUPPLY ISTURNEDOFF.
WATER LINE IS CRIMPED.
TEMPERATURE CONTROL IS NOT SET
PROPERLY (POSITION 5 OR 6).
COMPRESSOR TURNS ON AND OFF
FREQUENTLY. THE ROOMTEMPERATUREIS HOTTERTHAN NORMAL.
THE DOOR IS OPENED TOOOFTEN.
THE DOOR IS NOTCLOSEDCOMPLETELY.
THE DOOR GASKET DOESNOT SEAL
PROPERLY.
THE APPLIANCE DOES NOT HAVE THE
CORRECT CLEARANCES.
VIBRATIONS. CHECK TO ASSURE THAT THE APPLIANCEIS
LEVEL.
THE APPLIANCE SEEMS TO MAKETOO MUCH
NOISE. THE RATTLINGNOISE MAYCOME FROM THE
FLOW OFTHEREFRIGERANT, WHICH IS
NORMAL.
AS EACHCYCLE ENDS,YOU MAYHEAR
GURGLINGSOUNDSCAUSEDBYTHE FLOW
OFREFRIGERANTIN YOURAPPLIANCE.
CONTRACTION AND EXPANSION OFTHE
INSIDE WALLSMAY CAUSEPOPPING AND
CRACKLINGNOISES.
THE APPLIANCE IS NOTLEVEL.
THE DOOR WILL NOTCLOSE PROPERLY. THE APPLIANCE IS NOTLEVEL.
THE DOOR IS REVERSED ANDNOT
PROPERLYINSTALLED.
THE GASKET ISDIRTY.
THE BUCKET ISOUTOF POSITION.
ICECUBES ARE MELTED TOGETHER APPLIANCEDOOR IS OPENEDTOO OFTEN.

14
SERVICE FOR YOUR APPLIANCE
WE ARE PROUD OF OUR CUSTOMER SERVICE ORGANIZATION AND THE NETWORK OF
PROFESSIONAL SERVICE TECHNICIANS THAT PROVIDE SERVICE ON YOUR AVANTI
APPLIANCE. WITH THE PURCHASE OF YOUR AVANTI APPLIANCE, YOU CAN BE CONFIDENT
THAT IF YOU EVER NEED ADDITIONAL INFORMATION OR ASSISTANCE, THE AVANTI
PRODUCTSCUSTOMERSERVICE TEAM WILLBEHERE FOR YOU.JUST CALL US TOLL-FREE.
AVANTI PRODUCTSCUSTOMERSERVICES
PRODUCT INFORMATION
800-323-5029 WHATEVER YOURQUESTIONS AREABOUT OUR PRODUCTS,HELPISAVAILABLE.
PARTORDERS
800-220-5570 YOU MAYORDERPARTS ANDACCESSORIES THAT WILL BEDELIVEREDDIRECTLY TO
YOURHOME, BY PERSONAL CHECK, MONEY
ORDER,MASTERCARD, OR VISA.
IN-HOME REPAIR SERVICE
800-220-5570 AN AVANTI PRODUCTSAUTHORIZED SERVICECENTER WILL PROVIDEEXPERT
REPAIR SERVICE, SCHEDULED AT ATIME
THAT IS CONVENIENT FOR YOU.OUR
TRAINEDSERVICERS KNOW YOUR
APPLIANCEINSIDE ANDOUT.

15
YOUR AVANTI PRODUCTS
WARRANTY STAPLEYOURSALES RECEIPT HERE.
PROOF OFORIGINAL PURCHASEDATE IS
NEEDEDTOOBTAIN SERVICEUNDER
WARRANTY.
WHATISCOVERED
LIMITED ONE-YEAR
WARRANTY
FOR ONE YEAR FROM THE DATE OF
PURCHASE BY THE ORIGINAL OWNER,
AVANTI PRODUCTS WILL, AT ITS OPTION,
REPAIR OR REPLACE ANY PART OF THE
APPLIANCE WHICH PROVES TO BE
DEFECTIVE IN MATERIAL OR
WORKMANSHIP UNDER NORMAL USE.
DURING THIS PERIODAVANTI PRODUCTS
WILL PROVIDE ALL PARTS AND LABOR
NECESSARY TO CORRECT SUCH
DEFECTS FREE OF CHARGE, SO LONG AS
THE APPLIANCE HAS BEEN INSTALLED
AND OPERATED IN ACCORDANCE WITH
THE WRITTEN INSTRUCTIONS IN THIS
MANUAL. IN RENTAL OR COMMERCIAL
USE, THE WARRANTY PERIOD IS 90 DAYS.
ALL AVANTI APPLIANCES OF 3.5 CUBIC
FEET CAPACITY OR LESS MUST BE
BROUGHT/SENT TO THE APPLIANCE
SERVICE SHOPFOR REPAIR.
LIMITED SECONDTHROUGH
FIFTHYEAR WARRANTY
FOR THE SECOND THROUGH THE FIFTH YEAR
FROM DATEOF ORIGINAL PURCHASE, AVANTI
PRODUCTS WILL PROVIDE AREPLACEMENT
COMPRESSOR FREE OF CHARGE DUE TO A
FAILURE. YOU ARE RESPONSIBLE FOR THE
SERVICE LABOR AND FREIGHT CHARGES. IN
RENTAL OR COMMERCIAL USE, THE LIMITED
COMPRESSOR WARRANTY IS ONE YEARAND
NINE MONTHS. COST TO MOVE THEAPPLIANCE
TO THE SERVICERS’ SHOP AND BACK TO THE
USER'S HOME, AS MAY BEREQUIRED, ARETHE
USER'SRESPONSIBILITY.
WHAT IS NOT COVERED
?INCIDENTALOR CONSEQUENTIAL
DAMAGES.
?PARTS ANDLABOR COSTS FOR THE
FOLLOWINGWILL NOTBECONSIDERED
AS WARRANTY:
?DOORSPRINGSAND/OR FRAMES.
?INNER DOORPANELSAND/OR DOOR
SUPPORTS.
?CHESTAPPLIANCELIDLINERS.
?PLASTIC CABINETLINERS.
?REPAIRS PERFORMED BY UNAUTHORIZED
SERVICERS.
?SERVICE CALLS THAT DO NOTINVOLVE
DEFECTS IN MATERIAL OR WORKMANSHIP SUCH
AS CUSTOMER EDUCATION, DOOR REVERSAL,
OR PROPER INSTALLATION.
?SERVICE CALLS THATARERELATEDTO
EXTERNALPROBLEMS,SUCHASABUSE,
MISUSE, INADEQUATE ELECTRICAL POWER,
ACCIDENTS, FIRE, FLOODS, ORACTSOFGOD.
?REPLACEMENT OF HOUSEFUSES OR
RESETTINGCIRCUIT BREAKERS.
?FAILURE OF THEPRODUCTIF IT IS USEDFOR
OTHERTHANITSINTENDEDPURPOSE.
?THIS WARRANTY DOES NOTAPPLY OUTSIDETHE
CONTINENTALU.S.A.

16
WIRINGDIAGRAM

17
INSTRUCCIONES EN ESPAÑOL
PRECAUCION
PARA REDUCIR EL RIESGO DE INCENDIO,
DESCARGA ELECTRICA, ODAÑO CUANDO
USE SU ELECTRODOMESTICO, SIGA LAS
SIGUIENTES PRECAUCIONES.
?LEATODAS LAS INSTRUCCIONESANTESDE USAR SU ELECTRODOMESTICO.
?PELIGRO OPRECAUCION: EXISTE EL RIESGO QUE LOS NIÑOS QUEDEN
ATRAPADOS.
?NIÑOS ATRAPADOS OSOFOCAMIENTO NOSON UN PROBLEMA DELPASADO. LOS
ELECTRODOMESTICOS SON PELIGROSOS AUN SI SOLO LOSDEJAENELGARAJE
PORUN PAR DEDIAS.
?ANTES DEDESECHAR SU MAQUINA DE HACER HIELO OREFRIGERADOR USADO:
QUITELE LAS PUERTAS. DEJELAS REPISAS EN SU LUGAR PARAEVITAR QUE LOS
NIÑOS SEQUEDENATRAPADOS.
?NO PERMITA QUE LOS NIÑOS MANEJEN, JUEGUEN OENTREN DENTRO DEL
ELECTRODOMESTICO.
?NO LIMPIE SU ELECTRODOMESTICO CON LIQUIDOS INFLAMABLES. LOS GASES
PUEDEN OCASIONAR FUEGO OUNAEXPLOSION.
?NO GUARDE NIUSEGASOLINAUOTROSLIQUIDOS INFLAMABLES CERCADEESTE
ODE CUALQUIER OTRO ELECTRODOMESTICO. LOS VAPORES PUEDEN
OCASIONAR FUEGOOEXPLOSION.
-GUARDE ESTAS INSTRUCCIONES.-
INSTRUCCIONES PARA LA INSTALACION
?ANTES DE USAR SU EQUIPO
?RETIRELAENVOLTURAINTERNA YEXTERNA.
?VERIFIQUE QUE TENGA LAS SIGUIENTES PARTES: 1CANASTA DE HIELO, 2PARRILLAS,
UNA CANASTA DE METAL, 1MANUAL DEINSTRUCCIONES, 1RECOJEDOR DE HIELO
PLASTICO Y8METROS DELINEADE AGUA.
?ANTES DECONECTAR SUELECTRODOMESTICO ALACORRIENTE ELECTRICA, UBIQUELO
EN UNA SUPERFICIE PLANA POR LO MENOS POR 2HORAS. ESTO REDUCIRA LA
POSIBILIDAD DE MALFUNCIONAMIENTO EN EL SISTEMA DE ENFRIAMIENTO POR LA
MANIPULACION DURANTE EL TRANSPORTE.
?LIMPIE LA SUPERFICIEINTERIOR CON AGUATIBIAUSANDOUN PAÑO SUAVE.
?INSTALACION DESUMAQUINA DE HACER HIELO
?UBIQUE SU MAQUINA DE HACER HIELO EN UN PISO QUE SEA LO SUFICIENTEMENTE
FUERTE, PARA SOPORTAR SU PESO CUANDO ESTE TOTALMENTE LLENO OCARGADO.
PARANIVELAR LA MAQUINADEHACER HIELO,AJUSTE LAS PATAS DELANTERAS.
?NOES NECESARIO DEJAR ESPACIO ENTRELAPARTE TRASERAYLOSCOSTADOS DESU
ELECTRODOMESTICO SI LOQUIERE EMPOTRAR EN UNGABINETE.
?MANTENGA SU MAQUINA DE HACER HIELO ALEJADO DEL AIRE CALIENTE, VAPOR O
LIQUIDOS QUE PUEDAN SALPICARLO, YA QUE LAUNIDAD PODRIA AVERIARSE.
?LOS RAYOSSOLARES DIRECTOS PUEDEN DAÑAR LACAPAACRILICA, YLAS FUENTESDE
CALOR PUEDEN OCASIONAR UN AUMENTO ENELCONSUMO ELECTRICO. MANTENGALO
LO MAS ALEJADO POSIBLE DEL AGUA PARA PREVENIR ALGUN CHOQUE ELECTRICO.
EVITELOSSITIOSHUMEDOS YLOSAMBIENTES EXTREMADAMENTEFRIOS YA QUE ESTO
PUEDE AFECTAR LAEFICIENCIADEL ENFRIAMIENTO DE SUMAQUINA DEHACER HIELO.
?EVITEUBICAR SU MAQUINA DE HACER HIELO EN AREAS MOJADAS OMUY HUMEDAS.
MUCHA HUMEDAD EN EL AIRE PUEDE CAUSAR LA FORMACION DE ESCARCHA
RAPIDAMENTE YNECESITARA DESCONGELAR SU MAQUINA DE HACER HIELO MAS
FRECUENTEMENTE.

18
?CONECTE LA MAQUINADEHACER HIELOAUN ENCHUFEDEPARED EXCLUSIVO EINSTALE
EL CABLE DE TIERRA. BAJO NINGUNARAZON SE DEBERETIRARLATERCERA PUNTADEL
ENCHUFE. CUALQUIERCONSULTACON RESPECTO ALA ENERGIAY/O CABLE DE TIERRA
DEBESERDIRIGIDAAUN ELECTRICISTACERTIFICADO OAUTORIZADOPOR ELSERVICIO
TECNICO DE AVANTI PRODUCTS.
?CONEXION ELECTRICA-
ESTEELECTRODOMESTICO DEBE SER CONECTADO ATIERRA. EN EL CASO QUE OCURRA
UN CORTO CIRCUITO, LA CONEXION ATIERRA REDUCE EL RIESGO DE RECIBIR UNCHOQUE
ELECTRICO YA QUE CUENTA CON UN ALAMBRE PARA EL ESCAPE DE LA CORRIENTE
ELECTRICA. ESTE ELECTRODOMESTICO ESTAEQUIPADOCON UN ENCHUFE QUE CONSTA
DETRES PUNTAS, LA TERCERAPUNTA ES LA CONEXION ATIERRA. ESTE ENCHUFE DEBE
SER INSERTADO AUN ENCHUFE DE PARED QUE ESTECORRECTAMENTE INSTALADO CON
LA CONEXION ATIERRA.
ADVERTENCIA
?EL USO INAPROPIADO DEL ENCHUFE ATIERRA PUEDE DESENCADENAR UN CHOQUE
ELECTRICO. CONSULTE EL PERSONAL AUTORIZADO DE AVANTI PRODUCTS SI TIENE
ALGUNA DUDA SOBRE LAS INSTRUCCIONES OSI TIENE ALGUNA CONSULTA SI EL
ELECTRODOMESTICO ESTACORRECTAMENTE INSTALADOALACORRIENTE ELECTRICA
YATIERRA. SI EL CORDON DEL ENCHUFE DEL ELECTRODOMESTICO SE ENCUENTRA
DAÑADO, DEBE SER REEMPLAZADO POR EL SERVICIO TECNICODEAVANTI PRODUCTS.
?EL CORDON DEL ENCHUFE ESTA EQUIPADOCON TRESPUNTAS QUE ENCAJAN
PERFECTAMENTE EN UNENCHUFEDE PAREDSTANDARD PARAREDUCIR EL RIESGO DE
UN CHOQUE ELECTRICO.
?BAJONINGUNA CIRCUNSTANCIA CORTEOSAQUELATERCERA PUNTADEL ENCHUFE, YA
QUE ESTEES PARAQUE VAYA CONECTADOATIERRA.
?NOUSE UNA EXTENSION.
?EL VOLTATE DE ESTE ELECTRODOMESTICOES DE 120VOLTIOSAC, TIENE UNASALIDA
ELECTRICADE60 HZ. YCONSTADE UN ENCHUFEDETRESPUNTAS QUE VACONECTADO
AL ENCHUFE DE PARED.
?EL CORDON DEL ENCHUFE DEBE SERASEGURADO ATRAS DEL ELECTRODOMESTICOY
NODEJARLOEXPUESTO PARA EVITAR ACCIDENTES.
CONEXION A FUENTE DE AGUA
?ANTES DE INSTALAR LA UNIDAD VERIFIQUE LOS CODIGOS DE PLOMERIA EN SU ESTADO.
RECOMENDAMOS QUE PARA LA INSTALACION USE UN PLOMERO PROFESIONAL Y CON
LICENCIA.
?CONECTE EL TUBO (INCLUIDO) A LA FUENTE DE AGUA FRIA MAS CERCANA . INSTALE
SUFICIENTE TUBERIA A LA UNIDAD PARA PERMITIRLE MOVIMIENTO LIBRE DURANTE LA
LIMPIEZA Y EL SERVICIO. ASEGURESE QUE LA TUBERIA NO SEA APLASTADA O DAÑADA
DURANTE EL TRANSPORTE.
?COLOQUE LA UNIDAD DE MANERA QUE PERMITA LA CIRCULACION DEL AIRE A TRAVES
DE LA REJILLA DELANTERA (DIBUJO 1). CON UN TRAPO LIMPIO Y HUMEDO LIMPIE LA
UNIDAD POR DENTRO Y EL DEPOSITO DE HIELO.
DIBUJO 1
?
ADVERTENCIA
?
PARA LA CONEXION A LA FUENTE DE AGUA
SE REQUIERE UTILIZAR UN
PLOMERO PROFESIONAL Y ACREDITADO (CON LICENCIA),
ASI COMO VERIFI
C
AR LOS CODIGOS LOCALES Y ESTATALES

19
OPERACION INICIAL
1. CONECTE EL APARATO A UN ENCHUFE DE PARED DE 120V AC, POLARIZADO Y CON
SALIDA A TIERRA.
2. PARA PRODUCIR HIELO, ENCIENDA LA UNIDAD COLOCANDO EL INTERRUPTOR EN LA
POSICION“ON”.
3. COLOQUE EL CONTROL DE TEMPERATURAS EN LA POSICION 5 ó 6 (MARCADO ICE
MAKING).
EN ESTE ELECTRODOMESTICO, EL CONTROL DE TEMPERATURAS TAMBIEN SE USA
PARA OPERAR LA SECCION DE REFRIGERACION. MUEVA EL DIAL A LA POSICION 1 A 4 (4
ES LA MAS FRIA).
4. VERIFIQUE QUE LA FUENTE DE AGUA ESTE ABIERTA. EL AGUA ENTRARA AL MECANISMO
DE HACER HIELO CUANDO LA UNIDAD ALCANCE LA TEMPERATURA APROPIADA.
5. LOS PRIMEROS CUBOS DE HIELO PODRIAN SALIR PEQUEÑOS DEBIDO AL AIRE EN LA
ENTRADA DEL AGUA. LOS SIGUIENTES CUBOS TENDRAN EL TAMAÑO NORMAL EN
FORMA DE MEDIA LUNA.
6. EL PRIMER CICLO TOMARA APROXIMADAMENTE 30-40 MINUTOS.
7. PARA LLENAR EL DEPOSITO SE REQUIEREN 140 ML DE AGUA Y APROXIMADAMENTE 11
HORAS.
IMPORTANTE: DESHAGASE DE LOS CUBOS DE HIELO HECHOS DURANTE LAS 3 PRIMERAS
HORAS DE OPERACION.
?CUANDO EL DEPOSITO DE HIELO ESTE LLENO, EL MECANISMO PARA
HACER HIELO SE DETIENE AUTOMATICAMENTE. SIN EMBARGO EL
MOTOR CONTINUA ENFRIANDO Y MANTIENE LOS CUBOS DE HIELO
CONGELADOS.
?PARA DETENER LA CAIDA DE CUBOS AL DEPOSITO, LEVANTE EL
BRAZO DE METAL (DIBUJO 2).
?SI LA MAQUINA DE HACER HIELO NO ES USADA REGULARMENTE,
RECOMENDAMOS QUE VACIE EL DEPOSITO DEL HIELO
PERIODICAMENTE PARA ASEGURAR QUE TENGA HIELO FRESCO.
?A VECES LOS CUBOS PUEDEN SALIR BLANCOS O NUBOSOS, ESTO ES NORMAL Y NO
AFECTA EL SABOR O COMPOSICION DEL AGUA.
?LA REJILLA DELANTERA DEBE ESTAR LIBRE DE POLVO O PELUSAS PARA PERMITIR LA
LIBRE CIRCULACION DEL AIRE.
?LA UNIDAD DEBE SER DESCONGELADA APROXIMADAMENTE CADA 4-6 SEMANAS O
CUANDO VEA ESCARCHA DE MAS DE ¼” (7 MM) DE ESPESOR EN LAS PAREDES. PARA
DESCONGELAR, APAGUE LA UNIDAD, VACIE EL DEPOSITO DE HIELO Y MANTENGA LA
PUERTA ABIERTA POR LO MENOS 2” (5 CM).
COMOCAMBIAR LA DIRECCION DEAPERTURADE LA PUERTA
ENCASO DEQUENECESITE CAMBIAR EL LADODEAPERTURADELAPUERTA, POR FAVOR
CONSULTEAL SERVICIOPOS-VENTADE SULOCALIDAD.
USANDOSUMAQUINA DE HACERHIELO
ADVERTENCIA
NO USE AGUA HIRVIENDO PORQUE DAÑARA LAS PARTES DE PLASTICO. TAMPOCO USE
PUNTAS OINSTRUMENTOS METALICOS PARA RETIRAR LA ESCARCHA YA QUEDAÑARA EL
ESPIRAL DEENFRIAMIENTO YCANCELARALA GARANTIA. LERECOMENDAMOS USAR UNA
ESPATULA DE PLASTICO.
DIBUJO 2

20
CUIDADO YMANTENIMIENTO
?LIMPIANDOSUMAQUINA DEHACER HIELO
?EMPUJEEL CONTROL A“0FF”.DESCONECTE EL APARATO YRETIRELOS HIELOS.
?LAVE EL INTERIOR CON AGUA TIBIAYUNPAÑOSUAVE REMOJADO EN UNA SOLUCION DE
BICARBONATODE SODIO. LASOLUCION CONSISTE EN2CUCHARADAS DEBICARBONATO
DESODIO EN UN LITRODEAGUA.
?LAVE LACANASTA DE ALMACENAJE CON UNDETERGENTESUAVE.
?LAS PARTES EXTERNAS DE SU MAQUINA DEBEN SER LIMPIADAS CON UN DETERGENTE
SUAVE YAGUA TIBIA.
?EL ESPIRAL DEL CONDENSADOR DEBE SER LIMPIADO CUANDO ESTE SUCIO OTENGA
POLVO.
ADVERTENCIA
ASEGURESE DE DESCONECTAR LA MAQUINA DE HACER HIELO DE LA CORRIENTE
ELECTRICA. SI NO LO HACE, PUEDE OCASIONAR UN CHOQUEELECTRICOOHERIRSE.
SIFALLA EL SUMINISTRO ELECTRICO
USUALMENTE LA ELECTRICIDAD REGRESA EN UNAS POCAS HORAS SIN AFECTAR LA
TEMPERATURA DE SU MAQUINA DE HACER HIELO, SIEMPRE QUE LA PUERTA NO SE ABRA
MUYFRECUENTEMENTE. SI LE VA FALTAR ELECTRICIDAD POR UN PERIODODETIEMPO MAS
LARGO, USTED DEBE TOMAR LOS PASOS APROPIADOS PARA PROTEGER SU
ELECTRODOMESTICO.
GUIA PARASOLUCIONAR PROBLEMAS
PROBLEMA SOLUCION
SUELECTRODOMESTICO NO
FUNCIONA NO ESTACONECTADOALACORRIENTEELECTRICA. EL INTERRUPTOR SALTO OSE QUEMO UN FUSIBLE
EL CONTROL ESTAEN“OFF”
NOHACEHIELO EL CONTROL DETEMPERATURA NO ESTAENLA
POSICION 5Ó 6.
EL COMPRESOR SE ENCIENDE YSE
APAGA FRECUENTEMENTE LA TEMPERATURA DELAHABITACION ES MAS CALIENTE DE LO NORMAL.
LA PUERTA PERMANECEABIERTAMUCHOTIEMPO.
LA PUERTA NO QUEDOCOMPLETAMENTE CERRADA.
LA EMPAQUETADURADELAPUERTANOESTASELLADA
ADECUADAMENTE.
LA MAQUINADEHACER HIELONOTIENEEL SUFICIENTE
ESPACIO LIBRE.
HAY MUCHA ESCARCHA.
DESCONGELAR INMEDIATAMENTE.
VIBRACION. ASEGURESEQUE LA MAQUINADEHACER HIELOESTE
UBICADA ENUNLUGAR TOTALMENTEPLANO.
SONIDODEBURBUJEO,GOTEO,
COMO AGUA QUEHIERVE O
CRUJIDOS.
ESTO ES NORMAL. ESELREFRIGERANTE (USADO PARA
ENFRIAR LA MAQUINADEHACER HIELO) QUEESTA
CIRCULANDOATRAVES DEL SISTEMA.
LA CONTRACCION YEXPANSION DE LAS PAREDES
INTERNAS PUEDE OCASIONAR SONIDOSCOMO
CRUJIDOS.
LAPUERTANOCIERRA
COMPLETAMENTE LA MAQUINADEHACER HIELONOESTATOTALMENTE NIVELADA.
LA DIRECCION DE APERTURA DE LA PUERTA FUE
INVERTIDAPERO INSTALADA INCORRECTAMENTE.
EL SELLADOR DE LA PUERTA ESTA SUCIO.
LA CANASTADEALMACENAJE ESTAFUERADE SU SITIO
OBSTACULIZANDOELCIERRE DE LAPUERTA.
PRINTED IN CHINA