AVANTO CLIP-ON LIGHT PRO User manual

CLIP-ON LIGHT PRO
INSTRUCTIONS
Please read these instructions carefully before use. To avoid
damage to the product and to prevent eye injury, the light should be
used according to the following guidelines.
A
C
Magnetic clasp (A)
Power button (B)
Charging socket (C)
B
OPEN THE CLASP
Open the clasp (A) and clip the
light to your pocket, shirt collar,
the waist of your shorts or pants,
or to a reective vest. Note! For
the magnet to attach properly, the
attachment point must be a thin
fabric. Once you have attached
the light, shake it to ensure that
the attachment point is secure
and the light does not come off.
The light can be attached to
any magnetic metal to use as a
convenient task light.
POWER BUTTON
One-touch – light on, 100% power
(battery life approx. 3h)
Second press – light on, 70% power
(battery life approx. 4h)
Third press – light on, 50% power
(battery life approx. 5h)
Fourth press – SOS indicator
Fifth press – light off
CHARGING
The battery is charged at the factory and the
light comes ready to use. Open the protective
cover and connect the supplied USB cable to
the charging socket (C), then connect the other
end to a suitable USB power supply, such as a
phone charger or computer. Avoid high-power
chargers, which may damage the battery!

SAFETY INSTRUCTIONS
Small parts present a choking hazard. Keep in
a safe place, out of the reach of small children.
The product is not suitable for children under 6
years of age. Use the product only in a tempera-
ture range of –20 to 60° C and do not expose it
to direct heat or constant sunlight.
• Avoid exposure to solvents and/or vapors.
• Avoid prolonged exposure to strong vibrations.
• Do not use in areas where ammable gases
may be present.
• Do not look directly at the light. Do not point
the light at humans’ or animals’ faces.
• The front LED unit may become hot during use.
To avoid overheating, do not cover the light.
• The product should not be used for eye
examinations (e.g., a pupil test). This can cause
permanent damage to the eyes.
HANDLING AND USE OF
THE CLIP-ON LIGHT PRO
• Handle the product carefully.
• If you plan to not use the product for an ex-
tended period of time, charge the battery before
storing it. The battery level drops by about 5%
per month when not in use.
• For optimal use and lifespan, use the product
only in a temperature range of –4° to 140° F and do
not expose it to direct heat or constant sunlight.
MAINTENANCE AND REPAIR
• Do not attempt to modify or repair the
product. In the event of a malfunction, please
contact our customer service (avantolifestyle.
com/contact). We will be happy to help you.
• Do not expose the rechargeable battery to
temperatures above 140° F (such as in direct
sunlight) or store it near open ames.
• Dispose of or recycle the product according to
local regulations.
• Do not use cleaning agents that can damage
the product. Clean the light with a soft cloth to
avoid scratching the lens.
TECHNICAL INFORMATION:
• Lumens: 300 / 200 / 150
• Operating time: 3h / 4h / 5h
(frost may shorten battery life)
• Dust and water resistance: IP55 (protected
from dust and rain)
• BATTERY: Li-Polymer 450mAh
• LED: 10w
• Weight: 60g
• Warranty: 5 years
Important! Your light has a lithium polymer-type battery, which drains when the light is left on the
bright setting and does not dim until the power is nearly exhausted. When the light begins to dim
and the charge level indicates one light, the battery is almost fully drained and you should turn off
the unit. Deep battery discharge will damage the battery and shorten battery life. The battery lasts
for about 600 charges when used correctly. If you do not plan to use the light for a long time,
charge it before storage to prevent deep discharge of the battery.
avantolifestyle.com
For more information and videos go to: