Aveli XS A4 User manual

0
Laminator
Aveli XS A4
Manual

1
Content
1. Important safety information............................................................................................... 2
2. Exemption from liability..................................................................................................... 2
3. Use...................................................................................................................................... 3
4. Description of the device.................................................................................................... 3
5. Operation............................................................................................................................ 4
6. Cleaning ............................................................................................................................. 5
6.1. Cleaning the outer surface of the device......................................................................... 5
6.2. Cleaning the heating rollers............................................................................................. 5
7. Technical documentation.................................................................................................... 6
8. Disposal.............................................................................................................................. 6
9. Guarantee........................................................................................................................... 6

2
1. Important safety information
•Place the laminator on an easily accessible, level, dry, heat resistant and sufficiently
stable work surface. Do not place the laminator on the edge of the work surface.
•The maximum thickness of the paper and the lamination film is 100 Mic. The thickness
of the laminating film is 80-100 Mic. In case, lower or higher thickness than specified,
the laminating film may be squeezed and bubble formation. If it happens, please turn
off the laminatorand remove the laminating film.
•Never insert metallic objects (e. g. paper elips, staples etc.) or objects other than
laminating pouches which are intended for this laminator into the laminating pouch
infeed slot.
•Never laminate damp documents or organic objects (e.g. flowers, leaves etc.).
•Make sure that children do not insert any objects into the laminator. The device is not a
toy!
•Keep the laminating set away from pets.
•Do not leave the laminator unattended while it is operating and do not perform any other
activities du ring operation.
•Always switch the laminator off and pull the mains plug out of the socket when you are
not using the laminator, cleaning it or in the event of a fault.
•Do not cut the laminating pouches into pieces before laminating and do not in any case
cut off the sealed edges from the laminating sheets.
•DO NOT insert the open end of the film into the machine to prevent it from winding
inside the machine.
•After 30 minutes of lamination, a 30-minute break is recommended.
•The laminator will become hot during operation. You may burn yourself.
•Always let the laminator cool off completely before you clean it.
•If an object (sleeves, tie etc.) is unintentionally taken into the laminating pouch infeed
slot, immediately disconnect the mains plug.
•WARNING: Limitation of the possibility of electric shock:
①Do not use in a humid places. The device is intended for indoor use only.
②Do not remove the outer cover of the device or try to repair the device yourself.
③Avoid contact of the power cord with hot surfaces.
④Unplug the appliance when not in use or before handling.
Due to the constant development of technology, the functions of the product may differ.
The product and all accessories described in this documentation are subject to continuous
improvement and further development. For this reason, we reserve the right to change the
components, accessories, technical specifications and related product documentation
described in this documentation at any time without prior notice.
2.Exemption from liability

3
3. Use
This laminator is designed for hot lamination of paper.
•The thickness of the laminating film is 80-100 Mic
•Suitable for home or small office use.
•Unsuitable for lamination: money, policy cards, receipts, stamps, credit cards,
magnetic stripe cards, and similar items. Also, do not laminate sharp objects, rigid
plastic, historically valuable documents and unique documents.
4. Description of the device
1) Button ON/OFF
2) Ready indicator
3) The laminating pouch infeed slot - on the front of the laminator
4) The laminating pouch output slot - on the back of the laminator.
5) Plastic cover: ABS

4
5. Operation
1) Carefully unpack the laminator and place it on a flat and stable surface.
2) Connect the mains plug to a socket and move the ON/OFF switch „ to ON .
Warning: Connect the mains plug to a properly installed socket with a protective conductor
(AC 220-240 V/ 50 Hz).
3) The ready indicator - will turn from black to red within the next 3-4 minutes.
4) Once the ready indicator is green, place the document between the two sides of a laminating pouch.
5) lnsert the laminating pouch so that it is centred and with the closed-edge first into the laminating
pouch infeed slot- on the front of the laminator. The process starts automatically.
Notes: Make sure that the document is flush with and aligned as close as
possibleto the sealed edge of the laminating pouch.
6) The heating rollers will automatically pull the laminating pouch in and move it to the laminating
pouch output slot„ on the back of the laminator. Do not use force to pull out the laminating pouch!
7) Remove the laminating pouch and let it cool off briefly on a flat surface.
Warning: The laminating pouch will become hot during operation.
You may burn yourself, be carefully!
8) Move the ON/OFF switch - to OFF to switch the laminator off.

5
6. Cleaning
6.1. Cleaning the outer surface of the device
Warning: Always let the laminator cool off completely before you clean it.
The cover can be cleaned with a damp cloth with a small amount of soap.
1. Switch the laminator on by moving the ON/OFF switch - to ON.
2. Once the ready indicator - turns red, fold a sheet of pa per (A4) and insert it,
folded edge first, into the laminating pouch infeed slot -·
3. Keep repeating this process until no more glue deposits cling to the paper.
4. Switch the laminator off by moving the ON/OFF switch to OFF.
Note: Do not use any solvents or aggressive cleaning agents.
6.2. Cleaning the heating rollers

6
7. Technical documentation
Model:
Aveli XS A4
Mains voltage:
AC 220-240 V, 50 HZ
Power consumption:
45 W, 0,63 A
Weight:
cca 0,685 kg
Dimensions cca 330x100x58 mm
Preheating time:
2-4 min
Pouch thickness: 80 mic - 100 mic
Operating speed: 300 mm/min
Laminating
temperature: cca 125 °C
Maximum film
width: A4
Rolling
mechanism: 2 rollers
Lamination: Hot
Ready indicator:yes
Declaration of conformity: the EU declaration of conformity can be requested from the
service.
8. Disposal
Dispose of the packaging divided into different types of materials. Dispose of cardboard and paperboard
as waste paper and foil using recyclable., ..,.,. material collection service.
(Applicable in the European Union and other European states with systems for
the separate collection of reusable waste materials)
Old devices may not be disposed of in the household waste! Should the laminator no longer be capable
of being usedat some point in time dispose of it in accordance with the regulations in force in your state
or country. This ensures that old appliances are recycled in a professional manner and also rules aut
negative consequences for the environment. For this reason, electrical equipment is marked with the
symbol shown here.
9. Guarantee
In the event of a breakdown, return the device together with proof of payment and the original
packaging to the store where you purchased the device.