Avem quirks Medisafe Plus User manual
Avem Quirks
9 Business Park Drive
Lynbrook VIC 3975
1800 658 120
info@avemquirks.com.au
avemquirks.com.au
Setting up your UPS and external battery box
1. Unpack the UPS and battery pack from their
boxes. Please take care as the units are
extremely heavy.
2. Find a suitable location for the UPS and
battery pack to be placed. If sitting side by
side, please ensure there is ventilation
around the UPS for airflow.
3. You may stack the UPS on top of the battery
pack as shown to the left, but you must not
stack the battery pack on top of the UPS.
4. Please ensure the UPS and battery pack are
installed in a dry, clean location, away from
heat. The ideal temperature to ensure the
longevity of the UPS and battery pack is
20 –25ºC.
5. Do not plug in the UPS or battery pack yet.
2
5. Locate the external battery cover on
the back of the UPS and battery pack.
6. The UPS will only have one external battery
cover, and the battery box will have two. On
the battery box, use the one at the top to
link to the UPS.
If you are linking a second battery box,
please use the port at the bottom to link to
the second battery box.
7. Next, locate the external battery
cable that came with the battery
box.
8. Put the cable in the slot at the
top of the UPS.
The cable can only go in one
way with the release facing up.
3
9. Connect the battery cable to the
top slot on the battery box.
10. If you need to disconnect the battery cable,
press down the release and pull out.
11. Plug in the supplied power cable into the back of the
UPS and switch the power on at the wall socket.
The UPS will come on in standby
mode. There will be an input value,
but no output value.
4
12. Press and hold the ‘power’ button until you
hear a beep.
13. The UPS will now come online, and you should
have both an input and output value. The
output value should be 230v.
Once the set-up is complete, the UPS and
battery box display should look like this.
14. Plug your refrigerator into
one of the outlets on the
back of the UPS.
Your setup is now complete.
Please do not plug anything else into the back of the UPS, and do not plug more
than one refrigerator into each UPS and battery pack, as this will reduce the
protection time offered.
In the event of a power failure, the UPS will revert to battery back-up and there will
be a constant beeping which can only be silenced by pressing the ‘ESC’ button
once.
Please contact us directly on 1 800 658 120 to schedule a Programmed
Maintenance and Calibration service.
Thank you for choosing Medisafe Plus.
