Avenview HDM3D-C5SP-4 User manual

www.avenview.com|1
1x4 HDMI Extender / Splitter
Single CAT5 with 3D Support and
Local Output
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com|2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 5
1.6 Before Installation.................................................................................................................. 5
1.7 Panel Description................................................................................................................... 6
1.7.1 Front Panel ............................................................................................................................ 6
1.7.2 Rear Panel ............................................................................................................................. 6
1.7.3 Bottom Panel......................................................................................................................... 6
1.8 EDID Learning......................................................................................................................... 7
1.9 Installation ............................................................................................................................. 7
Section 2: Specifications......................................................................................................................... 8
2.1 HDMI PIN Definition............................................................................................................... 9
2.2 CAT5/6 PIN Definition............................................................................................................ 9

www.avenview.com|3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview HDM3D-C5SP-4 HDMI 1.3 Extender / Splitter over CAT5 with Full 3D Support has been tested
for conformance to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipment’s, the HDM3D-C5SP-4 should be used with care. Read the following
safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

www.avenview.com|4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview HDM3D-C5SP-4 HDMI over Single CAT5 with Full 3D Support Distribution Amplifier with Local
Output provides the most flexible solution by which the high definition video and high quality audio can be
transmitted to different locations over a long distance. These devices can cascade, allowing you to extend
HDMI compliant displays almost anywhere. The input HDMI source can be duplicated and distributed to up to
4 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI mini-extenders
HDM3D-C5-R-M or Long Range HDM-C53X-R. With the built in equalization, the input HDMI cable can be
extended up to 20 meters (66 feet) long under Full HD, and make the overall transmission distance superior
than regular HDMI splitters or matrix switches in the market. With use of Long Range Receiver, HDMI signal
can be extended to 50 meters (165 feet).
-Supports HDMI Deep Color & Full 3D
-HDMI
-HDCP compliant
-Regenerates the HDMI signal
-HDMI local output
-Supports default HDMI EDID and has the ability to learn the EDID of the displays
-Extends up to 20m (66ft) of input HDMI cable with Mini Receiver
-Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable with Long Range Receiver
-Extends up to 40m (130ft) (1080p) of output CAT5/6 cable
-Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
-Allows cascading
-Perfectly integrated with other HDM-C5XD Series products

www.avenview.com|5
1.5 Package Contents
Before you start the installation of the Extender/Splitter, please check the package contents.
-HDM3D-C5SP-4 x 1
-Power Adapter (+5VDC, 4A) x 1
-User’s Manual x 1
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com|6
1.7 Panel Description
1.7.1 Front Panel
1.7.2 Rear Panel
1.7.3 Bottom Panel
1. Power LED
2. Signal LED
3. Power Jack
4. HDMI Input
5. HDMI Local Output
6. CAT 5/6/7 Output 1 –4
7. SW1: EDID Mode
8. SW2: EDID –Full HD Selection
9. SW3: EDID –Audio Selection
10. SW4: 3D/2D Selection
1
2
3
4
5
6
7
8
9
10

www.avenview.com|7
1.8 EDID Learning
1. Power up the HDM3D-C5SP-4. Connect to HDMI OUTPUT with the display you want the HDM3D-C5SP-4 to
learn its EDID.
2. To learn the display's EDID for source device connected to HDMI OUTPUT, Set SW1 to left Position. Power
on and wait for about 2-3 seconds to complete the EDID learning process; the users do not need to power
cycle again or even twice while plugging on different displays.
Left Position
Right Position
SW1
EDID LEARNING
DEFAULT EDID
SW2
HD
FULL HD
SW3
AUDIO –2 CHANNEL
AUDIO-MULTI CHANNEL
SW4
2D
3D
1.9 Installation
To setup Avenview HDM3D-C5SP-4 follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM3D-C5SP-4
3. Connect the receiver HDM-C53X-R or HDM-C5-R-M to HDM3D-C5SP-4 from RJ45 Out with CAT5 /
CAT6 cable
4. Plug in 5V 4A DC Power (supplied).
5. Power on the HDMI display
6. Power on HDMI Sources.
The instant switching is enabled only when the video and audio setting of the source has been adjusted
to “Auto” or “Pass Through”

www.avenview.com|8
Section 2: Specifications
Item
Description
Units
HDM3D-C5SP-4
Unit Description
HDMI 1.3 Transmitter / Splitter over CAT5 / CAT6 with Full 3D Support
HDMI Compliance
HDMI Deep Colour & Full 3D
HDCP Compliance
Yes
Video Bandwidth
Single Link 225 MHz (6.75Gbps)
Supported Resolutions
480i / 480p / 720p / 1080i / 1080p60
Resolution and Distance
Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6)
Audio Support
Surround Sound (up to 7.1 Ch) or Stereo Digital Audio
Equalization
Built-in
Input TMDS Signal
1.2 Volts (peak-to-peak)
Input DDC Signal
5 Volts (peak-to-peak, TTL)
ESD Protection
-Human body model —±15kV (air-gap discharge) & ±8kV (contact discharge)
- Core chipset —±8kV
Input
1 x HDMI
Output
4 x Rj45
HDMI Connector
Type A (19 pin female)
RJ45 Connector
WE/SS 8P8C
Dimensions (L x W x H)
7.6” x 4.3” x 1.1”
Power Supply
5V 4A DC
Power Consumption
13 Watt (max)
Environmental
Operating Temperature
32˚~ 104˚F (0˚to 40˚C)
Storage Temperature
-4˚~ 140˚F (-20˚~ 60˚C)
Relative Humidity
20~90% RH (no condensation)

www.avenview.com|9
2.1 HDMI PIN Definition
Type A (Receptacle) HDMI
Pin 1
TMDS Data2+
Pin 11
TMDS Clock Shield
Pin 2
TMDS Data2 Shield
Pin 12
TMDS Clock–
Pin 3
TMDS Data2–
Pin 13
NC
Pin 4
TMDS Data1+
Pin 14
Reserved (N.C. on device)
Pin 5
TMDS Data1 Shield
Pin 15
SCL
Pin 6
TMDS Data1–
Pin 16
SDA
Pin 7
TMDS Data0+
Pin 17
DDC/CEC Ground
Pin 8
TMDS Data0 Shield
Pin 18
+5V Power
Pin 9
TMDS Data0–
Pin 19
Hot Plug Detect
Pin 10
TMDS Clock+
2.2 CAT5/6 PIN Definition

www.avenview.com|10
Notice
Performance Guide for HDMI over CAT 5/6 Cable Transmission
Performance rating
Type of category cable
Wiring
Shielding
CAT5
CAT5e
CAT6
Solid
Unshielded (UTP)



Shielded (STP)



Stranded
Unshielded (UTP)



Shielded (STP)



Termination
Please use EIA/TIA-568-B termination (T568B) at any time
1. The length depends on the characteristics and quality of the cables. Higher resolutions and longer
transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded
CAT6 with metal RJ-45 connectors is recommended.

www.avenview.com|11
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.