Avenview C-HDM-EXD-A User manual

VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
HDMI AUDIO EXTRACTOR
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: C-HDM-EXD-A

Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors

www.avenview.com
TABLE OF CONTENTS
1. GETTING STARTED ............................................................................................................................1
1.1 IMPORTANT SAFEGUARDS .................................................................................................................................1
1.2 SAFETY INSTRUCTIONS .......................................................................................................................................1
1.3 REGULATORY NOTICES FEDERATION COMMUNICATIONS COMISSION (FCC)
.........................................2
2. INTRODUCTION .....................................................................................................................................................3
2.1 PACKAGE CONTENTS ....................................................................................................................................... 3
2.2 BEFORE INSTALLATION ....................................................................................................................................3
2.3 APPLICATION DIAGRAM ....................................................................................................................................4
2.4 PANEL DESCRIPTION ..........................................................................................................................................5
4.
2.4.1 Front/Top Panel .........................................................................................................................................5
2.4.2 Rear Panel.................................................................................................................................................5
3. INSTALLATION ..................................................................................................................................7
SPECIFICATIONS ................................................................................................................................8
2.4.3 Right Panel .................................................................................................................................................6
2.4.4 Left Panel..................................................................................................................................................6

www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•u se of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview C-HDM-EXD-A Audio Extractor function has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the C-HDM-EXD-A
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the
risk of damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERATION COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with part 15 of the f CC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
El ECTRICAl PARTS. THIS MAY RESULTS IN
ELECTRICAL SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WIll
VOID THE WARRANTY AND CONTINUED USE OF
THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE If RACK MOUNTED OR INSTALLED ON
A SURFACE, IT SHOULD BE IN A GROUNDED
ENVIROMENT.

www.avenview.com Page
3
2. INTRODUCTION
Avenview C-HDM-EXD-A Audio Extractor allows you to extract audio signals from your HDMI source. When
connecting to a TV or display you don’t always get the best audio, or in the case of a PC monitor, no audio at all. So with
this Audio Extractor you can take your original HDMI audio signal and convert it to digital optical or analog Stereo (L/R)
audio. This means that you can output your audio signal to external speakers or extend your audio signal pathway.
2.1 PACKAGE CONTENTS
Before you start the installation of the HDMI Extender, please check the package contents.
1C-HDM-EXD-A X 1
2POWER ADAPTER (5V DC 1.2A)
USER MANUAL X 1
2.2 BEFORE INSTALLATION
•Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components
within the casing.
•Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.
•Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this
may result in malfunction of the unit and may cause fire.
•Do not twist or pull by force the ends of the UTP cable. It will cause malfunction.
3
X 1

www.avenview.com Page
4
2.3 APPLICATION DIAGRAM

Page|5
www.av
enview.com
2.4.1 FRONT/TOP PANEL (C-HDM-EXD-A)
PANEL DESCRIPTION2.4
1. 2.
3.
2.4.2 REAR PANEL (C-HDM-EXD-A)
1
HDMI In
Out
HDMI
Optical
LR
HDMI Out: Connect to the display (TV/monitor)
with an HDMI cable for video and audio signal
output. No HDMI output connection is required to
send audio through the analog and optical
outputs.
Optical Out: Connect to audio equipment such
as an amplifier or Hi-Fi system with an optical
cable for digital audio output. Supports up to
bitstream audio 5.1CH and LPCM 2CH.
L/R Out: Connect to audio equipment such as an amplifier or active speakers with a stereo RCA cable
for audio output. Supports analog stereo output only.
23
DC 5V: Connect to the 5V DC power supply
into the unit and plug the adaptor to an AC
wall outlet.
1
HDMI Audio Extractor
Link
Power 2
3
The Power LED will illuminate in blue when the
unit is connected to the power supply and
switched on.
Link LED: The Link LED will illuminate in green when both the source and the display are connected and
have established a link. This LED will also blink once while the power is turned on.
1. 2.
3.

www.avenview.com Page
6
Bitstream
TV 2CH
LPCM
Power
2.4.3RIGHT PANEL (C-HDM-EXD-A)
DC 5V
2.4.4LEFT PANEL (C-HDM-EXD-A)
12
1
TV/Bitstream/2CH LPCM: This switch allows
users to select the source's audio EDID.
TV Mode: Switch to TV mode for the HDMI
source to output audio per the EDID of
connected TV or AV receiver, supports up to
LPCM 7.1 channels.
Bitstream Mode: Switch to Bitstream mode
for the HDMI source to output Bitstream
audio per the built-in EDID, supports up to
compressed audio 5.1 channels.
2CH LPCM Mode: Switch to 2CH LPCM
mode for the HDMI source to output LPCM 2
channels audio per the built-in EDID.
Power: Switches the unit ON or puts the
device into standby mode.
1. 2.
Link LED: The Link LED will illuminate in green when both the source and the display are connected and
have established a link. This LED will also blink once while the power is turned on.
3.

www.avenview.com Page
7
3. INSTALLATION (C-HDM-EXD-A)
To setup Avenview C-HDM-EXD-A please follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV.
2. Connect a HDMI source (such as a Blu-Ray Disc player or PC) to the C-HDM-EXD-A HDMI IN.
9. Plug in 5V/.2 A DC power (supplied).
10. P ower on HDMI Source.
11. Power on the HDMI/OPTICAL/LR out source.
2. Connect a HDMI/OPTICAL/LR source (such as a TV, Speaker, Amplifier) to the HDMI OUT.

www.avenview.com Page 8
Item Description
MODEL C-HDM-EXD-A
UNIT DESCRIPTION HDMI Audio Extractor
HDMI AUDIO SAMPLING RATE Up to 192 kHz
OPTICAL AUDIO SAMPLING RATE
OUTPUT PORTS 1×HDMI, 1×Optical,1×L/R
HDMI AUDIO FORMAT LPCM 2/5.1/7.1CH, Dolby 5.1, DTS 5.1, DD+, D-TrueHD & DTS-HD
OPTICAL AUDIO FORMAT LPCM 2CH, Dolby 5.1 & DTS 5.1
ESD PROTECTION - Human body model — ±8kV (air-gap discharge) &
±6kV (contact discharge) - Core chipset — ±8kV
DIMESNIONS (L X W X H) 3.6"(L)× 3.4" (W)×1.4" (H)
WEIGHT 0.2 lbs
CHASSIS MATERIAL Plastic
POWER SUPPLY5V / 1.2A
POWER CONSUMPTION 2.1 Watt
Environmental
OPERATING TEMPERATURE 32˚ ~ 104˚F (0˚ to 40˚C)
STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C)
RELATIVE HUMIDITy 20~120% RH (no condensation)
Up to 48 kHz
4.SPECIFICATIONS

www.avenview.com
Avenview Warranty Certificate
AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact s[email protected].
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact
[email protected].
To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented
to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.
NOT COVERED BY THIS WARRANTY
This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of Avenview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).
AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
275 Woodward Avenue, Kenmore, NY 14217
1.866.508.0269
99 9
Page 9
9
PagePage

TECHNICAL SUPPORT
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
Control Your Video
USA Head Office
Office Avenview
Corp. 275 Woodward Avenue
kenmore, Ny 14217
phone: [phone] ext223
Fax: +1.866.387-8764
Email: [e-mail]
Canada Sales
Avenview
151 Esna park Drive, u nit 11 & 12
Markham, Ontario, l 3R 3B1
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Avenview Europe
Avenview Europe
Demkaweg 11
3555 HW Utrecht
Netherlands
Phone: [phone]
Email: [e-mail]
Avenview Hong Kong
Unit 8, 6/f., Kwai Cheong Centre,
50 k wai Cheong Road,
Kwai Chung, N.T.
Hong kong
Phone: [phone]
Email: [e-mail]