avertX HD310IR Spectrum Vision User manual

This guide is a quick reference that offers users basic information regarding
installation and operation of the HD310IR Spectrum Vision™ WDR Indoor / Outdoor
High Denition IP Cameras. For further details on installation and operation, please
refer to the User Manual on the included CD and at avertx.com.
Before proceeding, please conrm that the box contains the items listed here. If any
item is missing or has defects, DO NOT install or operate the product and contact
AvertX for assistance.
About this Guide
CONTENTS
HD310IR
Dome Camera
Torx Tool Documents &
Installation CD
HD310IR QUICK START GUIDE
Screws Anchors
The camera can be installed directly onto a
wall or the ceiling. Be sure that the structure
is strong enough to support the camera.
1. Remove the camera dome cover.
2. Use the included mounting template to
pre-drill holes for the mounting screws
and, if passing the cable through the
ceiling or wall, drill a 3/4” hole.
3. Connect the Ethernet cable to the dongle
on the camera.
• Protect the network cable connection
from water damage by running the cord
inside a wall or ceiling, or through conduit.
• For outdoor installations, seal any
holes in the wall or ceiling with silicone
caulk to protect against water intrusion.
4. Afx the base of the camera to the wall
with the included self-tapping screws and
wall anchors.
5. Adjust the position of your camera.
6. Replace the dome cover.
Wall mount and electrical box mounting plate
accessories are available at avertx.com.
INSTALLATION
Remove Dome Cover
Align Holes on Wall
Adjust Aim
32863AA
SPECTRUM VISION™WDR
HD IP DO ME CA MERA
INDOOR/OUTDOOR
Paintable
Dome Cover
Paintable Dome Cover
The dome cover for the HD310IR is paintable, allowing for a
customizable look. Use a paint designed for plastic and paint away
from the camera dome to avoid overspray. To install, rmly press
the cover onto the camera.
WITH NIGHT VISION

MICRO SD CARD
& RESET BUTTON
32863AA
• This camera features an IP66-rated weather resistant connector. For unprotect-
ed outdoor connections, screw the connector on the included ethernet camera
cable onto the camera dongle.
• Protect the network cable connection from damage by running the cord inside a
wall or ceiling, or through conduit.
• If passing the cord through a wall or ceiling, drill a 3/4” hole.
• For outdoor installations, seal any holes in the wall or ceiling with silicone caulk
to protect against water intrusion.
NETWORK CABLE INSTALLATION
When installing your AvertX Night Vision HD Indoor/Outdoor Dome Camera, it is
important to consider how the network cable attached to the camera is arranged.
CONNECTING TO THE CAMERA
If you are using this camera with an AvertX recorder, follow the instructions in the
HDIP recorder user manual to connect to your camera. You can also set up your
camera over your network using an internet browser. Type the IP address of the
camera in the address bar of your internet browser to connect to the camera.
If your internet browser doesn’t install the camera viewer software, check the security
settings or ActiveX controls and plug-in settings. If your internet browser asks for
permission to install the ActiveX control, you must allow the ActiveX control to
continue the installation.
Default IP address:
192.168.0.250
User Name and Password:
The username and password are case sensitive.
Username – admin
Password – 1234
• Your camera includes a microSD card slot (up to
128GB), which can be used for emergency video
backup. The microSD card is not included.
• You can return the camera to factory default
settings if necessary. Press the Reset button for
30 seconds.
• You must remove the cover of the camera to
access the microSD card slot and the Reset button.
Reset button
microSD card slot
1. Remove the dome from the camera.
2. Remove the rubber gasket surrounding the lens.
3. Twist the textured ring at the base of the lens to
focus your camera.
4. Replace the rubber gasket.
5. Replace the dome on the camera.
Remove
gasket Turn ring
to focus
FOCUSING THE CAMERA
For optimal image quality, you may need to manually focus your AvertX camera after
it has been installed.
Copyright © 2015 AvertX. All rights reserved. Information contained in this document is subject to change
without prior notice. AvertX does its best to provide accurate information, but cannot be held responsible for
typos or mistakes.
1-855-2AVERTX (1-855-228-3789)
www.avertx.com