AVF JAK90 User manual

JAK90 Leaflet No. 463683 rev02
Read through ALL instructions before commencing installation.
If you have any questions about this product or issues with installation
contact the customer services helpline before returning this product to
the store. See jl.avfgroup.com/p/jak90 for more information.
STOP
CUSTOMER SERVICES HELP LINE NUMBER:
01952 670009
AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England
22lbs
10kg

Tools Required
Boxed Parts
AA
B
B
C
C
D
E
D
E

Fx2
J1x2
J6x2
J11 x2
Gx2
J2x2
J7x2
J12 x2
Hx2
J3x2
J8x2
Kx2
I1x6
J4x4
J9x2
Lx4
I2x4
J5x2
J10 x2
Mx2
M5
12mm
M4
12mm
M4
16mm
M5
10mm
M5
16mm
M6
10mm
M6
12mm
M6
16mm
M8
10mm
M8
12mm
M8
16mm
M8
25mm
Nx2

Introduction
Before you begin please take time to read through this introduction and instructions to
familiarise yourself with the product and to also help you select the best way to attach
your Soundbar. This instruction manual covers many different configurations and is very
comprehensive. Please do not be put off by this as you will only need to follow a few steps.
This introduction gives you a basic idea as to what steps are involved in mounting your
Soundbar to your TV.
X1
X2
X3
Measure your TV and Soundbar fixing holes
Prepare the Soundbar Mount Bracket

Before you start to mount your Soundbar to your TV you will need to decide if you are
going to mount your Soundbar above your TV or below your TV
Mounting Above or Below?
Mounting Above
Follow steps 3 to 8
Mounting Below
Please go to step 9
You will then need to attach the Soundbar to your TV. See below for a description of the
different fixing methods available.
Screwing to the Back of the Soundbar
Use this method if you have no clashes with the TV and Soundbar fixing holes.
Screwing to the Bottom of the Soundbar
Use this method if you have no clashes with the TV and Soundbar fixing holes.
Attaching the Soundbar with Hook and Loop
Use this method if your Soundbar has no fixing holes or if there are clashes.
Attaching the Soundbar with Manufacturers Bracket
Use this method if a Bracket is supplied by the Manufacturer. You will also find more
information in the Manufacturers instructions.
Attaching the Soundbar with Keyhole Pin
Use this method if your Soundbar has Keyhole fixing holes.

Measure your TV and Soundbar fixing holes
1
Measure the width of the fixing holes on
the back of your TV (X1) and the
back or bottom of your Soundbar (X2)
or the length of your Soundbar (X3)
if it has no fixing holes.
If your TV fixing holes and
Soundbar fixing holes are equal you
will not be able to screw directly to
the back or bottom of your Soundbar.
In this case you will need to use a
different method for attaching.
X1
X2
X3
Before you attach horizontal bracket B to vertical bracket A use measurements
X1 and X2 or X1 and X3 to decide the best configuration. Please see below for examples.
Examples below show soundbar with fixing holes
Example shows soundbar
with no fixing holes
A A A A
B B B
300mm 200mm
X1X1
700mm
X2
300mm
X2
A A
B B
300mm
X1
800mm
X3

Prepare the Soundbar Mount Bracket
2
Hx2
A
B
B
Before you start to mount your Soundbar to your TV you will need to decide if you are
going to mount your Soundbar above your TV or below your TV
Mounting Above or Below?
Mounting Above
Follow steps 3 to 8
Mounting Below
Please go to step 9
H
Use measurements X1 & X2 or X3 from Step 1
H

Mounting Above
You only need to follow one of steps 3 to 7 if you have chosen to have your Soundbar
mounted above your TV.
Please select your method of attaching your Soundbar to your TV and follow the
appropriate steps.
Screwing to the Back of the Soundbar
3
Screwing to the Back of the Soundbar
Screwing to the Bottom of the Soundbar
Attaching the Soundbar with Hook and Loop
Attaching the Soundbar with Manufacturers Bracket
Attaching the Soundbar with Keyhole Pin
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
J10 x2
J7x2
J4x2
J1x2
I1x2
Fx2
Attach the brackets to the back of your TV using suitable screw and reducer combinations.
I1x2
I2x2
Fx2
I1x2
Fx2 Fx2
I1I2
Screw
diameter
dependant
J1/J4/J7/J10
F
I1I2
Screw
diameter
dependant
J1/J4/J7/J10
F

Free Standing TV
Wall Mounted TV
If you are attaching your Soundbar to a free standing TV
please use this step in conjunction with step 8
If you are attaching your Soundbar to a wall mounted TV
please use this step in conjunction with the instructions
provided with your TV wall mount.
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV
wall mount manufacturer.
J2/J5/J8/J11/J12
I1I2
Screw
diameter
dependant
N

Screwing to the Bottom of the Soundbar
4
J9x2
J6x2
J3x2
J1x2
I1x2
Attach the brackets to the back of your TV using suitable screw and reducer combinations.
I1x2
I2x2
I1x2 Kx2
J4
C
L
I1
iAttaching Shelf Brackets
ii Attaching Soundbar
I1I2
Screw diameter
dependant
J1/J3/J6
J9
K

Free Standing TV
Wall Mounted TV
If you are attaching your Soundbar to a free standing TV
please use this step in conjunction with step 8
If you are attaching your Soundbar to a wall mounted TV
please use this step in conjunction with the instructions
provided with your TV wall mount.
J2/J5/J8/J11/J12
I1I2
Screw
diameter
dependant
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV
wall mount manufacturer.
N

Attaching the Soundbar with Hook and Loop
5
J4
C
L
I1
iAttaching Shelf Brackets and
Hook and Loop Pads
D/E
Free Standing TV If you are attaching your Soundbar to a free standing TV
please use this step in conjunction with step 8
J2/J5/J8/J11/J12
I1I2
Screw
diameter
dependant

Wall Mounted TV
If you are attaching your Soundbar to a wall mounted TV
please use this step in conjunction with the instructions
provided with your TV wall mount.
Free Standing TV or Wall Mounted TV
This step is for Free Standing
or Wall Mounted Method
i
ii
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV
wall mount manufacturer.
N

Attaching the Soundbar with Manufacturers Bracket
Attaching manufacturers bracket. Please note this bracket is not included.
The image below shows an example of a bracket.
I1
J4
L
6
i
Free Standing TV If you are attaching your Soundbar to a free standing TV
please use this step in conjunction with step 8
J2/J5/J8/J11/J12
I1I2
Screw
diameter
dependant

Wall Mounted TV
If you are attaching your Soundbar to a wall mounted TV
please use this step in conjunction with the instructions
provided with your TV wall mount.
Free Standing TV or Wall Mounted TV
This step is for Free Standing or Wall Mounted TV
Attach your Soundbar as per the manufacturers instructions
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV
wall mount manufacturer.
N

Attaching to Soundbar with Keyhole Pin
7
Free Standing TV Wall Mounted TV
If you are attaching your Soundbar to a
free standing TV please use this step in
conjunction with step 8
If you are attaching your Soundbar to a
wall mounted TV please use this step in
conjunction with the instructions provided
with your TV wall mount.
Free Standing TV or Wall Mounted TV
This step is for Free Standing or Wall Mounted TV
Gx2 I1x2 Mx2
I1I2
Screw
diameter
dependant
J2/J5/J8/J11/J12
I1
M
G
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV wall
mount manufacturer.
N

Attaching Soundbar Bracket to TV
8
You will only need to use this step if you are attaching your Soundbar to a free standing TV
J11/J12 x2
J8x2
Attach the brackets to the back of your TV using suitable screw and reducer combinations.
I1x2
J5x2
I1x2
J2x2
I1x2
I2x2
I1I2
Screw
diameter
dependant
J2J5J8J11 J12

Mounting Below
You only need to follow one of steps 9 to 13 if you have chosen to have your Soundbar
mounted below your TV.
Please select your method of attaching your Soundbar to your TV and follow the
appropriate steps.
Screwing to the Back of the Soundbar
9
Screwing to the Back of the Soundbar
Screwing to the Bottom of the Soundbar
Attaching the Soundbar with Hook and Loop
Attaching the Soundbar with Manufacturers Bracket
Attaching the Soundbar with Keyhole Pin
- Step 9
- Step 10
- Step 11
- Step 12
- Step 13
J10 x2
J7x2
J4x2
J1x2
I1x2
Fx2
Attach the brackets to the back of your TV using suitable screw and reducer combinations.
I1x2
I2x2
Fx2
I1x2
Fx2 Fx2
J1/J4/J7/J10
F
I1I2
Screw
diameter
dependant

Free Standing TV
Wall Mounted TV
If you are attaching your Soundbar to a free standing TV
please use this step in conjunction with step 14
If you are attaching your Soundbar to a wall mounted TV
please use this step in conjunction with the instructions
provided with your TV wall mount.
J2/J5/J8/J11/J12
I1I2
Screw
diameter
dependant
The brackets and the screws
shown in grey are only an example.
These are supplied by the TV
wall mount manufacturer.
N

Screwing to the Bottom of the Soundbar
10
J9x2
J6x2
J3x2
J1x2
I1x2
Attach the brackets to the back of your TV using suitable screw and reducer combinations.
I1x2
I2x2
I1x2 Kx2
iAttaching Shelf Brackets
ii Attaching Soundbar
I1I2
Screw diameter
dependant
J1/J3/J6
J9
K
J4
C
L
I1