Avid Technology KeyRig 25 User manual

PROCEDURE
Procedure P/N:
1069-65018-00
Title:
KeyRig 25 Testing Procedure
Revision: A Page 1 of 4
UNCONTROLLED DOCUMENT when printed or copied
Date Printed: 3/16/2010
Form: 0150-30027-01 Rev C
1.0 Scope
This procedure defines the method required to test:
•9900-52477-00 KeyRig 25
2.0 Reference Documents
2.1 M-Audio Dealer Check in sheet
2.2 M-Audio Scrap log
2.3 M-Audio RTV Log
3.0 Equipment
3.1 Software (Midi OX)
3.2 Midi cable x2
3.3 Oxygen 8v2
3.4 MIDISPORT 2x2
3.5 SP-2 sustain pedal
4.0 Process Description
4.1 The KeyRig 25 needs to be in the “like new” state: all buttons
released, in the up position, all knobs turned to the left, and the
product turned OFF.
4.2 The KeyRig 25 is OFF.

PROCEDURE
Procedure P/N:
1069-65018-00
Title:
KeyRig 25 Testing Procedure
Revision: A Page 2 of 4
UNCONTROLLED DOCUMENT when printed or copied
Date Printed: 3/16/2010
Form: 0150-30027-01 Rev C
4.3 The computer is ON.
4.4 Connect the KeyRig 25 to the computer with a USB cable.
4.5 Press and hold the Recall – and +buttons beneath the LCD screen
while powering on the unit to reset the KeyRig 25.
4.6 Launch the MIDI OX program on the
computer.
4.7 In the top Nav bar select OPTIONS – MIDI Devices.

PROCEDURE
Procedure P/N:
1069-65018-00
Title:
KeyRig 25 Testing Procedure
Revision: A Page 3 of 4
UNCONTROLLED DOCUMENT when printed or copied
Date Printed: 3/16/2010
Form: 0150-30027-01 Rev C
4.8 In MIDI Devices – in the MIDI Inputs field, select 1) USB 02 In.
4.9 In the MIDI Outputs field, select 2) Microsoft GS Wavetable SW
Synth.
4.10 In the Port Mapping field, it should display Microsoft GS Wavetable
SW Synth.
4.11 Click OK.
4.12 Test each key on the keyboard with multiple taps. Check for sound
and corresponding data output in MIDI OX on the computer.
4.13 Test Modulation buttons: hold down a key and simultaneously
alternate buttons. The sound should modulate. Check for data output
in MIDI OX.
4.14 Test Pitch Bend buttons: hold down a key and simultaneously
alternate buttons. The sound should vary in pitch. Check for data
output in MIDI OX.
4.15 Test the Octave buttons: tap a key simultaneously with buttons to
hear the note ascend and descend in its. Check for data output in
MIDI OX.
4.16 Test the Volume slider for sound response.
4.17 Test knobs C1 – C8 for response in MIDI OX.
4.18 Test buttons C12 – C19 below the knobs for response in MIDI OX.
4.19 Test each button below the LCD screen – check for a response in the
LCD screen display.
4.20 On the computer, close MIDI OX.
4.21 Unplug the USB cable.
4.22 Turn off the KeyRig 25.
5.0 Revision History
Rev Change Description Created/ Revised By Date

PROCEDURE
Procedure P/N:
1069-65018-00
Title:
KeyRig 25 Testing Procedure
Revision: A Page 4 of 4
UNCONTROLLED DOCUMENT when printed or copied
Date Printed: 3/16/2010
Form: 0150-30027-01 Rev C