AVIV DESERT EYE User manual

DESERT EYE
ASSEMBLY INSTRUCTIONS

PRESS THREADED INSERTS INTO HOLES USING SOLDERING IRON
1

NOTE: 2 DIFFERENT ROCKER ARM TYPES
THIN FLAT IN SHOWN ORIENTATION TOWARDS
CHASSIS
2

12
ASSEMBLE 4X ROCKER ARMS IN ORIENTATION SHOWN
3
3 4

1
ASSEMBLE 2X BACK ROCKER ARMS IN ORIENTATION SHOWN
4
2

BOLT-IN SHOCK ABSORBERS ON ALL 6 ROCKER ARMS
5

ASSEMBLE 2X SPINNERS
6

ASSEMBLE 2X IDLERS
7

ASSEMBLE 2X MOTORS AND 2X PULLEYS
8

FIT ALUMINUM BAR INTO HOUSING. SECURE WITH RETAINING RINGS
9

12
FIT ALUMINUM BAR INTO HOUSING. SECURE WITH RETAINING RINGS
10

FIT 2X BELTS OVER SUSPENSION SYSTEM
11

12
SLIDE IDLER TO TIGHTEN BELT
TORQUE NUT WHEN DESIRED
BELT TIGHTNESS IS REACHED

13
SCREW RASPBERRY PI INTO MAIN HOUSING
WITH PLASTITE SCREWS

14
ATTACH MOTOR CONTROLLER TO AVIV1 PCB

15
PLUG AVIV1 PCB INTO RASPBERRY PI

16
WIRE PCB TO MOTOR CONTROLLER

17
CONNECT DC MOTORS TO BOARD OUTPUTS
MOTOR 1 MOTOR 2