AW AV-ACC-MK Instruction Manual

AIR VISE & WORKHOLDING ACC-MK-ID19
11350 W Executive Dr.
Boise, ID 83713
WWW.AIRVISE.COM
[e-mail]
208-918-8473
AIR VISE & WORKHOLDING
WWW.AIRVISE.COM | [e-mail] | 208-918-8473
Manual Operation Kit - AV-ACC-MK
Operate your vise through the control a one Touch action, a simple push-pull valve
GETTING TO KNOW YOUR OPERATIONS KIT:
One Touch Action - Push/Pull Valve
Hardware
Regulator

AIR VISE & WORKHOLDING ACC-MK-ID19
11350 W Executive Dr.
Boise, ID 83713
WWW.AIRVISE.COM
[e-mail]
208-918-8473
AIR VISE & WORKHOLDING
WWW.AIRVISE.COM | [e-mail] | 208-918-8473
SETTING UP YOUR ONE TOUCH ACTION:
1. Connect Port 1 to regulated air supply.
2. Connect Port 2 to left Port on Vise Base.
3. Connect Port 4 to right Port on Vise Base.
Your operations kit and vise are set
up and connected. You can begin
to actuate the jaws. Make sure the
vise has regulated air supply. Adjust
the regulator’s PSI to the desired
clamping force.
Air flow thru regulator

AIR VISE & WORKHOLDING ACC-MK-ID19
11350 W Executive Dr.
Boise, ID 83713
WWW.AIRVISE.COM
[e-mail]
208-918-8473
AIR VISE & WORKHOLDING
WWW.AIRVISE.COM | [e-mail] | 208-918-8473
OPERATING YOUR VISE:
Utilizing the included Push-Pull valve, depress the button and the jaws will close,
pull up on the button to open the jaws.
When changing your jaws to run different work, place the switch to the open
position. Slide jaws outward to remove. Install your new jaws in the reverse order
and you’re ready to go.
Ensure regulator is supplied with shop air or machine air, set the pressure to the desired clamping force.