AxcessAbles DOLLY User manual

®
®EXPANDABLE FRAME A/V
PRODUCTION HANDCART DOLLY
DOLLY FALL 2020
®
®
EXPANDABLE
FRAME
A/
V
P
R
O
DU
C
TI
O
N HAND
C
ART D
O
LLY
California Prop 65 Warning
This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

THANK YOU FOR PURCHASING ANOTHER HIGH QUALITY AXCESSABLES PRODUCT.
PLEASE FOLLOW THESE PRODUCT INSTRUCTIONS AND SAFETY TIPS TO ENSURE YEARS
OF USE AND SAFE PRACTICES WHEN USING THIS PRODUCT.
40”
13.5”
2.75”
48”
non-skid
coating
unlock
lock
solid all-metal
construction
wing screw
locking pin
large treaded
rear wheels
p2
front handle
rear handle
handle
locking
foot
lever
#2
handle locking
foot lever #1
locking pivoting
front caster wheels
n
9.5”
quick view
parts
& features
.....
AXCESSABLES DOLLY
wing screw

1
step down
#2
foot lever
to fold
fold
rear handle
down first
how to raise
dolly handles
from folded/closed
position
.....
STEPS MUST BE FOLLOWED IN THIS SEQUENCE
TO PROPERLY OPEN/RAISE AND CLOSE/FOLD
THE DOLLY HANDLES
raise front
handle first
step down
#1
foot lever
to fold
2
how to fold
dolly handles
from upright/open
position
....
Simply raise the Front Handle first and check
that it firmly locks into position.
Raise Rear Handle until it locks into position.
position
....
Step down on front Foot Lever #2 and lower Rear Handle until it locks into its’ closed position.
Step down on rear Foot Lever #1 and lower Front Handle until it locks into its’ closed position.
1
2
*Double check that both handles have securely locked
into position before loading and moving the dolly.
1
2
*Double check that both handles have securely locked
into position before loading and moving the dolly.
AXCESSABLES DOLLY
foot lever #1
location
foot lever #2
location
p3
DOLLY PAYLOAD FRAME MUST BE IN FULLY RETRACTED POSITION IN ORDER TO START HANDLE
FOLD DOWN PROCEDURE

ANY QUESTIONS? VISIT US AT WWW.AXCESSABLES.COM FOR CUSTOMER SUPPORT
a
a
b
lock spot is located
under the middle bar
of the main frame
frame extends
additional two feet
to accommodate more
of your equipment!
regular payload
how to
expand/retract
dolly payload area
.....
TO EXPAND DOLLY
● Loosen the two Wing Screws. (see Fig.1)
● Pull out until the Locking Pin firmly “clicks” into hole (see Fig.2)
● Tighten Wing Screws.
TO RETRACT DOLLY
● Loosen the two Wing Screws. (see Fig.1)
● Push IN the Locking Pin and then pull the Front
and Rear frames of the dolly together. (See Fig. 3)
● Tighten Wing Screws.
a
a
b
a
loosen screws
on both sides
of the frame
& extend.
Fig. 1
b
make sure
locking button
snaps securely
on extension.
Fig. 2
Fig. 3
........................................................................
b
IMPORTANT
Be sure to tighten Wing Screws
to keep payload area securely
in place when DOLLY is in this
smaller payload configuration.
regular and
heavy-duty
configurations
.....
© AxcessAbles 2020
SAFETY INSTRUCTIONS
● Always lock front caster wheels when not in motion, and during loading and unloading.
● Always make sure that the Locking Pin has clicked into place in its’ locking hole before loading dolly with equipment.
● Always tighten Wing Screws after any adjustments to payload capacities.
extended
payload
p4