AXEM Technology AT880 User manual

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
1/45
AT880
User guide

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
2/45
Table of content
Table of content..................................................................................................................... 2
1Background.................................................................................................................... 4
2Before using AT880........................................................................................................ 5
2.1 Safety information................................................................................................... 5
WARNIING..................................................................................................................... 5
CAUTION....................................................................................................................... 5
NOTICE ......................................................................................................................... 5
3How to use battery correctly........................................................................................... 5
4Caution when using AT880 ............................................................................................ 5
4.1 Caution when using AT880 ..................................................................................... 6
4.2 Product composition................................................................................................ 6
4.3 Name of each part................................................................................................... 7
4.4 Function of each part............................................................................................... 8
5Basic Function................................................................................................................ 9
5.1 Battery..................................................................................................................... 9
5.1.1 Switch On Backup Battery................................................................................ 9
5.1.2 Attaching and Detaching the battery................................................................10
5.1.3 Charging battery..............................................................................................10
5.2 Power On and Off ..................................................................................................11
5.2.1 Power Off:.......................................................................................................12
5.2.2 Power On........................................................................................................12
5.2.3 Automatic Power OFF.....................................................................................12
5.2.4 Battery Discharging.........................................................................................13
5.2.5 Checking Battery Gauge.................................................................................13
5.2.6 Backup Battery................................................................................................13
5.2.7 Battery replacement........................................................................................14
5.3 Soft Reset..............................................................................................................14
5.4 Hard reset..............................................................................................................14
5.5 Initializing System ..................................................................................................15
5.6 Attaching Micro SD card.........................................................................................17
5.7 Attaching SIM Card and SAM Card........................................................................18
5.8 Screen settings ......................................................................................................19
5.8.1 Screen brightness setting................................................................................19
5.8.2 Screen adjustment ..........................................................................................19

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
3/45
5.9 Volume and sounds setting....................................................................................20
5.10 Data and time setting .............................................................................................20
5.11 Using keypad .........................................................................................................22
5.12 Inputting Data.........................................................................................................22
5.13 Using <Fun> Button ...............................................................................................23
5.14 Use of stylus...........................................................................................................23
5.15 Connecting PDA to PC...........................................................................................23
5.16 Data transfer ..........................................................................................................26
5.17 Firmware upgrading ...............................................................................................27
6Optional modules ..........................................................................................................28
6.1 1D or 2D barcode scanner .....................................................................................28
6.2 Barcode emulator setting........................................................................................28
6.2.1 Barcode symbology setting .............................................................................31
6.2.2 Barcode scanning ...........................................................................................32
6.3 WLAN connection and termination.........................................................................34
6.4 Bluetooth connection and termination ....................................................................35
6.4.1 Bluetooth Pairing.............................................................................................36
6.5 GPS demo program execution ...............................................................................38
6.6 Use of camera........................................................................................................40
6.7 HF13.56 demo program execution.........................................................................41
6.8 Mifare tag recognition.............................................................................................41
6.9 ISO15693 tag recognition.......................................................................................42
6.10 UHF 900MHz Program...........................................................................................42
6.11 Modem...................................................................................................................43
6.11.1 Modem ON/OFF..............................................................................................43
6.11.2 Modem Resetting............................................................................................44
7Appendix.......................................................................................................................45

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
4/45
1Background
Description
Date
Version
Author
Auditor
First parution
27/05/2020
V1.0
CLO
ACA

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
5/45
2Before using AT880
2.1 Safety information
Your safety is extremely important. Read and follow all warnings and cautions in this document
before you handle and operate equipment. If you do not follow the safety warnings and
cautions, you might be seriously injured, and the equipment and data also might be damaged.
WARNIING
A warning requires you must pay attention to the operating procedure practice,
condition, and statement strictly, or might be injured seriously.
CAUTION
A caution alerts you that you must observe strictly when you operate procedure,
practice, configure.
NOTICE
A notice provides you the information while using AT880.
3How to use battery correctly
•In case you drop the main body or battery in water, please do not put into the stove or
heater for drying. Just keep it in natural drying or contact purchase place.
•Please note that the battery terminal should not be in contact with metallic object.
•If you do not use the battery for a long time, please keep it at room temperature after
charging.
•Operating time of battery can be shorter than usual in accordance with loss of battery
and use time. In this case, please contact us.
•You have to use provided adaptor when charging the device.
•Turn off the device properly then detach or replace the battery.
4Caution when using AT880
•User careless or products repair would damage the stored data. Manufacturer is not
responsible for this damage, so please do back-up the important data separately.
•If you have a problem on product, do not try to repair or disassemble it by yourself,
please contact our customer service center.
•Do not use your product at the specific places such as hospital, plane and so on where
electromagnetic wave or the risk may occur.
•Please note that using the device in environment of high temperature and humidity for
long hours can make a malfunction of device.
•In case of that noise, smoke and odor occur at the device while using product, please
disconnect the charger with device and off the power immediately, then please contact
our customer service center.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
6/45
•If you have any other questions on use of device, please contact our customer service
center.
4.1 Caution when using AT880
The mobile computer is a small, ergonomically designed PDA, which is built on the Microsoft
window CE 5.0 Operating System.
The PDA can be equipped with Barcode Scanner, RFID Tag Reader, MSR Card Reader,
Printer, Smart Card Reader, Wireless Modem, Camera and other optional items. Thanks to its
various functions it can be used in Industry, Enterprise, Logistics…
4.2 Product composition
Open the packing box and make sure you have all the below items are:
Please contact our customerservice in defect of product composition and need to be changed.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
7/45
4.3 Name of each part

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
8/45
4.4 Function of each part

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
9/45
5Basic Function
PDA battery is composed of a main battery and a backup battery. A main battery supplies the
power to the system and RAM which could keep save the data. A backup battery could keep
save the data of RAM when the main battery discharged completely.
Main Battery: 3.7V 2,970mAh Lithium –polymer
Backup Battery: 3.7V 80mAh Lithium –polymer
Note:
Switch on the backup battery when you use the PDA for the first time and then install the
completely charged main battery.
5.1 Battery
5.1.1 Switch On Backup Battery
The image blow shows the battery compartment.
Slide the lever to right to start supplying power to the system.
To attach main battery to the back-battery compartment of the PDA and to confirm the
battery latch locked firmly refer to “5.2 Battery attaching and detaching”
Connect adaptor to the PDA adaptor connecting jack, and check if the “Power LED” is Red,
and then charge the power completely until it gets into Green.
Note:
If the window wallpaper has shown on the screen, press the <power> button for a couple
of seconds in order to shorten the charging times.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
10/45
5.1.2 Attaching and Detaching the battery
5.1.2.1 Battery detachment
These images show the back bottom of the PDA.
Slide the battery latch to the right (UNLOCK side), and then lift the main battery out of the
compartment along both sides of groove.
5.1.2.2 Battery attachment
Put the top part of battery into the upward groove, and then press down the bottom of battery
into the battery compartment, slide battery latch to the left (LOCK side) to attach battery firrmly.
5.1.3 Charging battery
You have to charge the battery via dedicated adapter, which provided from the factory. “Power
LED” is Red while charging or is Green when charged completely.
Connecting Adapter
1. Plug the adapter cable to 220V socket.
2. Connect adapter DC cable to the “Power connecting jack” of the main body.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
11/45
3. “Power LED” is Red while charging.
Caution:
You must charge the battery by using dedicated adapter, which provided from factory, or your
device might get damage.
5.2 Power On and Off
Press <Power> button one time, the device will enter low-Power mode (Sleep Mode). The
following window is displayed on the desktop or other programs is running in the system.
Press <Power> button once again could activate
the system.
Taskbar: displays the currently running programs.
Start button: activates the start menu and then
execute a program.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
12/45
5.2.1 Power Off:
1. When the system is in booting status, press <Power> button for a couple of seconds,
then the backlight will be turned off and enter the low-power mode (sleep mode).
2. You can also press <Start Button> -> <Suspend> button to turn the device off.
5.2.2 Power On
1. When the system power is in the on status, press <Power> button quickly, then
backlight will be turned on and start the system.
2. Connect to the ActiveSync USB cable; the power will be turned on automatically.
Note
Even though the power is in off state, if there was a tiny battery gauge remained, the data of
RAM will be saved, and those programs which have been running for some time before the
power turned off, will be recover rapidly. If the main battery and backup battery are both in the
discharge state, the RAM data will disappear, and the system will be starting if the power is
charged again.
5.2.3 Automatic Power OFF
If the device has been powered but has not been used for a period, the system will enter low-
power mode (sleep mode) automatically. To set up the sleep mode time:
[Start Button] -> [Setting] -> [Control Panel] -> [Power Management] -> [Power Off]
You can also double click <Power> Icon to enter this interface.
You can also press the <Power> button to activate the system, when the device turned off
cause get into the sleep mode.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
13/45
5.2.4 Battery Discharging
If the main battery discharges completely, the system will not turn on, the device will get into
low-power mode (sleep mode) automatically. Even if you press the <Power> button, the
system will not be turned on. In this case, you should charge the main battery or connect the
adaptor to the adaptor connecting jack of main body, then press the <Power> button to turn
on the system.
5.2.5 Checking Battery Gauge
Note :
Battery life is largely affected from the user using method and
surrounding environments.
A 2,970mAh battery is usually needs 6 ~ 12 hours to get charged
completely.
5.2.5.1 Checking Battery Gauge
[Start Button] -> [Setting] -> [Control Panel] -> [Power Management]
-> [Battery]
5.2.5.2 Low Power Warning
If the remaining battery gauge cannot support the system running
any more, a low power warning message window will be popped up
on the screen.
In this case, you need to press the <Power> button to turn off the
power, and to charge the battery as soon as possible.
5.2.6 Backup Battery
A backup battery could safely keep the RAM data, even the main battery discharged
completely.
Caution
If the main battery and the backup battery are both discharged, the RAM date will disappear.
Among the running programs, the RAM data will disappear in which are using, and the system
will not be restore to previous state, but rebooting system after start charging.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
14/45
5.2.7 Battery replacement
You need to purchase a new one if the battery is damaged or has reached its end of life.
■Warning!
Please dispose the used batteries in a designated place.
If there is no response from the system or an application is locked up and stops responding,
and when you want to upgrade the firmware, reset the system is maybe necessary.
5.3 Soft Reset
When do you need to perform Soft Reset?
If there is no response for your command from the system, it calls (Hang-up). In this case, you
need to perform a soft reset. Soft reset will end programs and the user memory region will be
deleted, but installed programs and data, and so on, are not affected.
[Process of Soft Reset]
Using the stylus pen to press <Reset> button briefly. The system will restart again, after the
screen turns off shortly.
5.4 Hard reset
When do you need to perform Hard Reset?
Hard Reset, which is also called Cold Reset, enables to initialize hardware completely. Users
installed programs, copied files and registry values will keep remained even performed Hard
Reset, but the real time and date will be initialized. So you need to reset the time and date
after performedHard Reset. You need perform Hard Reset when the Soft Reset cannot restore
the system.
[Process of hard reset]
Use stylus pen to press <Power> Button and <Reset> Button simultaneously. The system will
restart again after the screen turns off shortly.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
15/45
[Result of Hard Reset]
•System will restart
•Operating System (Windows CE) will be loading and restarting.
•Desktop will appear in about ten seconds.
•Time and date window will be popped up and need to reset it.
5.5 Initializing System
Enter [Boot Menu] and do what you want, when in the situations as below:
•When you need to restore the
original registry information,
which has been changed.
•When you need to initialize “My
device” storage spaces.
•When you need to initialize
“Flash Disk” storage spaces.
•When you need to initialize
system to factory default
settings.
You can alsopress <Power>button and <Fun> button simultaneously, and then press <Reset>
button to perform Hard Reset.
[Boot Menu] window would appear in a couple of seconds.
Warning!
Except for [Clean System], please do not use other functions.
The system might not work properly if you use other functions on the [Boot Menu].

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
16/45
.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
17/45
The image below is battery compartment, and there are 1EA SIM Card Slot, 1EA SAM Card
Slot and 1EA Micro SD Card Slot.
5.6 Attaching Micro SD card

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
18/45
You can find the Micro SD Memory Card icon when executing the -le explorer, after having
inserted the Micro SD card.
5.7 Attaching SIM Card and SAM Card
SIM Card and SAM Card can easily insert and pull out along arrow direction.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
19/45
5.8 Screen settings
5.8.1 Screen brightness setting
Brightness is already set 80% at the factory, and brightness is the
biggest consume part of the power, so you might need to adjust it to
your actual need.
[Setting the screen brightness]
[Start Button] -> [Setting] -> [Control Panel] -> [Backlight]
[MyDevice] -> [Control Panel] -> [Brightness]
Brightness: enable you to adjust brightness.
Timeout: enable you to adjust the timing of turning off brightness.
Key Light: enable you to adjust the timing of turning off key lamp.
5.8.2 Screen adjustment
When you first use the device or you need to use the device for a long period time, you may
not be able to select the place where you touched with stylus. To solve the problem you have
to reset the coordinate calibration values.
[Start Button] -> [Setting] -> [Control Panel] -> [Stylus] -> [Calibration] -> [Recalibration]
Press and hold stylus pen briefly on the center of cross symbol and repeat 5 times as it moves
around the screen. The screen counts 30 seconds after calibrating, and you can finish the
recalibration to touch screen wherever you want, if you do not any action, the screen will
automatically finish the recalibration of itself.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –[email protected] –[phone] –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : PDAUHF1350-UG-v1.0
Version : V1.0
20/45
5.9 Volume and sounds setting
Volumes is already set 80% at the factory, and you can readjust you need volume at control
panel -> ”Volume and Sounds”
Setting Volume and Sounds
[Start Button] –> [Setting] -> [Control Panel] -> [Volume and Sounds]
5.10 Data and time setting
[Start Button] -> [Setting] -> [Control Panel] -> [Date and Time]