Axial RR10 Bomber User manual

COVER
INSTRUCTION MANUAL
AX90048-I001
AX90048-I001
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates

4
4
4
4
2

4
4
4
4
3

4 Close the battery tray and hood.
1 Turn on the transmitter. 2 Connect the battery.
3 Install the battery
Note:
Power to the vehicle is controlled
by connecting / disconnecting the
battery.
4
Make sure charger is correct for battery type selected for use.
Examples: Do NOT charge Lipo batteries with Nickel Metal Hydride
charger. Do NOT charge Nickel Cadmium batteries Lipo charger.
Stellen Sie sicher, Ladegerät ist korrekt für Batterietyp zur Verwendung ausgewählt.
Beispiele: Laden Sie keine Lipo-Akkus mit Nickel-Metall-Hydrid-Ladegerät. Laden Sie
keine Nickel-Cadmium-Akkus Lipo Ladegerät.
Assurez-vous que le chargeur est correcte pour le type de batterie sélectionné
à l'emploi. Exemples: Ne pas charger les batteries Lipo avec chargeur hydrure
métallique de nickel. Ne chargez pas les batteries au nickel-cadmium Lipo chargeur.

Steering Servo
C-Hub
Receiver Box
Steering
Transmission
Upper 4-link Bar
Shock Absorber
Spur/Pinion/Slipper
(Under Cover)
Motor 35T
Steering Knuckle
Driveshaft
Lower 4-link Bar
Battery Tray
Spare Tire Carrier
Differential
(inside axle housing)
Top View Parts
5

Getting-Started Checklist
The following checklist is a guide for getting you vehicle running for the first time.
Read ‘Cautions’ in Manual. (Page 2) Familiarize yourself with vehicle and
its components.
Even though the vehicle is new check
driveshaft setscrews and other screws to
make sure they are tight from the factory.
Charge battery pack. (Page 4) Install 4X AA batteries into Transmitter.
(Page 7)
Install battery pack in vehicle. (Page 4)
Check to make sure steering and throttle
operation work correctly. (Page 7)
Range check radio system. (Next Page)
Drive vehicle, challenge yourself and
have fun!
Maintain vehicle. (Next Page)
Turn on transmitter first,
then plug in battery
(power ESC) (Page 4)
6

6
KEEP CHASSIS FREE OF DIRT
OR DEBRIS
CHECK FOR LOOSE SCREWS
ON CHASSIS ESPECIALLY
THE KNUCKLE, C-HUB AND
AXLE LOCKOUT SCREWS
CHECK FOR WEAR ON
THE BALL JOINTS IN THE
STEERING AND SUSPENSION
LINKS
(REPLACE IF NECESSARY)
CHECK DRIVESHAFT SET
SCREWS AND RE-THREAD
LOCK IF NECESSARY
CHECK WHEEL NUTS MAKING
SURE THEY’RE SNUG
CHECK TIRES MAKING SURE
THE BEADS ARE STILL FIRMLY
BONDED TO THE ENTIRE
CIRCUMFERENCE OF THE RIM
REPLACE TRANSMITTER
AA’S IF THE GREEN LIGHT IS
BLINKING
INSPECT THE SPUR AND
PINION GEARS FOR DAMAGE
CHECK SLIPPER CLUTCH IF
APPLICABLE, FOR PROPER
OPERATION (SEE PAGE 25 STEP
23 FOR SETUP INSTRUCTIONS)
CHECK DRIVELINE FOR
SMOOTH BIND-FREE
OPERATION
CHECK FOR ANY LOOSE
CONNECTIONS OR FRAYED
WIRING
INSPECT SHOCK
ABSORBERS FOR SMOOTH
DAMPENED OPERATION
CHECK RECEIVER ANTENNA
TO CONFIRM IT’S NOT
DAMAGED
CHECK STEERING
OPERATION FOR ANY BINDS
REPLACE ANY NOTICEABLE
BENT OR BROKEN PARTS
Maintaining Your Vehicle
Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak running performance. Preventative
maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain
your vehicle.
Range-Checking Your Radio System
The radio system should be checked before operating the vehicle to ensure it’s operating properly and has adequate range.
1. Turn on the transmitter first and then the vehicle.
2. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.
3. Walk away until you are at the farthest distance you plan to operate the vehicle.
4. Steer the vehicle back and forth and throttle both forward and reverse making sure there is no erratic behavior.
5. If any erratic behavior is exhibited do not operate the vehicle,call customer service for further assistance.
RANGE-CHECKING FOR DISTANCE
7

AE-5 Forward/Reverse ESC w/ Drag Brake
Roll Cage Removal
Mount the ESC in an area that is well ventilated and isolated from vibration and shock.
Connect the ESC motor wires to the motor red-red & black-black.
Plug the receiver with into the throttle channel on the receiver. The black negative wire should be
towards the outside of the receiver.
Before plugging the battery into the ESC, make sure your transmitter is on and the throttle trim is set at
zero.
Connect the battery to the ESC, this will turn on the ESC.
Test forward and reverse control using the transmitter.
To calibrate the ESC, make sure the transmitter is on and the throttle control is at neutral.
Connect the battery to the ESC and wait 3 seconds to let the ESC initiate a self-test and automatic
throttle calibration.
When the ESC is ready to run a long beep sound will be emitted from the motor.
Always disconnect the battery when the vehicle is not in use.
8

Pinion 56 60 64 68
11
28.85 30.91 32.97 35.03
12 26.44 28.33 30.22 32.11
13 24.41 26.15 27.90 29.64
14 22.67 24.88 25.90 27.52
21.15 22.67 24.18 25.69
19.83 21.25 22.67 24.08
18.67 20.00 21.33 22.67
15
16
17
Spur Gear
32 Pitch 38T/13T (Stock Gearing AX30392 or HD AX30395)
Pinion 56 60 64 68
11
32.64 34.97 37.31 39.64
12 29.92 32.06 34.20 36.33
13 27.62 29.59 31.57 33.54
14 25.65 27.48 29.31 31.14
23.94 25.65 27.36 29.07
22.44 24.04 25.65 27.25
21.12 22.63 24.14 25.65
15
16
17
Spur Gear
32 Pitch 43T/13T (Underdrive HD Gearing AX30402)
Pinion 56 60 64 68
11
25.38 27.19 29.00 30.81
12 23.26 24.92 26.58 28.25
13 21.47 23.01 24.54 26.07
14 19.94 21.36 21.94 22.60
19.61 19.94 21.27 22.60
17.45 18.69 19.94 21.18
16.42 17.59 18.77 19.94
15
16
17
Spur Gear
32 Pitch 36T/14T (Overdrive HD Gearing AX30401)
Final Drive Gear Ratio = (Spur/Pinion)x5.67
Gesamtubersetzung = (Spur/Pinion)x5.67
39.64:1
16.42:1
9
NOTES

Gear Mesh Adjustment
Suspension Tuning - Upper Link Adjustments
•Moving the upper links at the chassis
will change the anti-squat characteris-
tics of the vehicle under power.
•RTR Stock: Front upper hole, rear
middle hole.
•Optional holes, will create more or less
Anti-Squat for the rear traction under
power.
•Remove X2 M2.6x8mm AXA0413
Flatheads from AX31107 Spur Cover to
gain access to spur and pinion
•Loosen X2 M4x12mm AX31121
Capheads from AX31106 Motor Mount
Clamp
•Rotate the motor and motor mount
assembly to fine tune gear mesh
AXA0413
AXA0413
AX31121
AX31121
Rotate to adjust mesh
RTR
Option
Option
RTR
Option
Front
Rear
10

AXIAL LIMITED WARRANTY
Your Axial product is warranted to be free of defects in materials and workmanship when new in the factory sealed box. This warranty does not cover damages due to normal wear and tear,
users' failure to perform routine maintenance, error of assembly or installation, modications or addition of aftermarket parts or option parts. This warranty lasts as long as the original
purchaser owns the product and is not transferable (verified by dated itemized sales receipt accompanied with product). In the event of a defect under this warranty, Axial will, at
our discretion, repair or replace the product, provided our inspection indicates that an original defect exists. Axial provides a 10-day warranty from the date of purchase on electronics
(i.e. servo, esc, radio). Axial reserves the right to replace any product which is no longer available with a product of comparable value and function. If Axial determines the repair is not
covered under warranty guidelines, there could be a charge applied for the repair and return shipping charges. Note: Purchasing products from unauthorized distributors may void warranty
and prevent support and service.
INTERNATIONAL CUSTOMER WARRANTY
Please return product to the dealer where the purchase was made. If your Axial product purchase was made through an on-line retailer, any warranty issues must be taken care of by that
retailer. Axial assumes no responsibility for Axial products sold internationally by on-line retailers.
REPAIR
For warranty repair, please contact Axial Customer Service at (877) 64-AXIAL (877-642-9425).
HOURS AVAILABLE:
8:00 am - 5:00 pm Monday through Friday, Central Time.
11
Warranty Info
Gear Mesh Adjustment
Suspension Tuning - Upper Link Adjustments
•Moving the upper links at the chassis
will change the anti-squat characteris-
tics of the vehicle under power.
•RTR Stock: Front upper hole, rear
middle hole.
•Optional holes, will create more or less
Anti-Squat for the rear traction under
power.
•Remove X2 M2.6x8mm AXA0413
Flatheads from AX31107 Spur Cover to
gain access to spur and pinion
•Loosen X2 M4x12mm AX31121
Capheads from AX31106 Motor Mount
Clamp
•Rotate the motor and motor mount
assembly to fine tune gear mesh
AXA0413
AXA0413
AX31121
AX31121
Rotate to adjust mesh
RTR
Option
Option
RTR
Option
Front
Rear

12
AX80073 x1
AX31300
10mm Shock Parts Tree 2 (Blue) x2
AX80072 x1
AX80006
Servo Set x1
AX80069
x2
AX31301
10mm Shock Caps Parts Tree (Blue) x2
AX80071
Straight Axle Adapter Rear x1
AX80083
Rock Buggy Links Set x1
AX80062
XR10 C Hub Carrier Set
x1
AX31108
2-Speed Hi/Lo Transmission Case x1
AX31114
WB8 Driveshaft x2
AX31323
RR10 Electronics Box Mold x1
AX31316
AR60 Dual Shear Steering Knuckle Set x1
AX31318
RR10 Battery Tray Chassis Components
x1
AX31332
RR10 Battery Tray Chassis Components 2
x1
AX31317
x1
AX31333
RR10 Skid Plate x1
AX31049
Helmet Mold (Black)
x2
AX80018
Hardware Parts Tree x3
AX80002
x 2
AX80033
10mm Shock Set 1 x2
AX31106
2-Speed Hi/Lo Transmission Motor Mount
x1
AX31125
Yeti™ Fuel Cell x1
AX31065
Spur Gear 32P 64T
x1
AX31324
RR10 Transfer Case Mold x1
AX31109
Yeti™ Rear 4 Link Set x1
AX31326
22.2 Walker Evans Wheels
x5
AX31107
Shifter Spur Cover x1

13
AX31322
RR10 Cage Sides x1 AX31321
RR10 Cage Lower Rails x1
AX31320
RR10 Rear Cage Components Mold x1
AX31319
RR10 Center Cage Mold x1

14
AX31131
T-Case Gear Set x1
A
X31130
H
igh Speed Transmission
G
ear Set x1
AX31130
High Speed Transmission
Gear Set x1
AX31131
T-Case Gear Set x1 AX31131 T-Case Gear Set x1
AX30463
4.5x6.5mm Join Pin x4
AX30385
x2
AX30500
Heavy Duty Locker x2
AX30113
Rubber Bump Stop 3.6x7x4 x4
AX30413
Slipper spring x1
AXA0286
M4x12mm x1
AX30392
38T Bevel Gear x2
A
Pad
X31068
Slipper x2
AX31059
Slipper Plate x2
AX30429
12mm Aluminum Hub x1
AX31314
Aluminum Shock Body 12x47.5mm
x4
AX31131
T-Case Gear Set x1
AX30408
Input Shaft 5x29mm x2
AX31148
WB8-HD Joint 10X15mm x4
AX31148
WB8-HD Joint Male Universal x4
AX30392
13T Bevel Gear x2
AX30112
Shock Diaphragm 13x4.5mm x4
AX31315
Spring 14x70mm 1.43 lbs/in - Purple (2pcs) (Blue Springs) x2
AX31336
Spring 14x70mm 3.27 lbs/in - Yellow (2pcs) (Blue Springs) x2
AX30723
Pinion 32DP 12T
x1
AX31083
Radio Box Seals x1
AX31067
Slipper Plate x1
x1
AX30419
Solid Axle Dogbone 7x69mm
x1
AX30419
Solid Axle Dogbone 7x125mm
AX30776
Straight Axle Shaft 6x160.2mm x1
AX30776
Straight Axle Shaft 6x104.2mm
x1
AX31127
2-Speed Hi/Lo Transmission Top Shaft
5x91mm
x1
AX31129
2-Speed Hi/Lo Transmission Bottom Shaft
5x75mm
x1
AX31313
Transfer Case Output Shaft 5x68mm x1
AX30155
Shock Shaft 3x59.5 x4
AX30368
Axle 6x39mm x2

15
AXA0439
M3x20mm x1
AXA436
M3x12mm x1
AXA441 x4
AXA0422
M2.6x6mm x16
AXA115
M3x10mm x14
AXA087
M3x16mm x8
AXA091
M3x30mm x2
AXA015
M2x10mm x16
AX31250
M4 Serrated Nylon Locking Nut (Black) x4
AXA144
M3x8mm x10
AXA0113
M3x6mm x9
AXA117
M3x15mm x19
AXA118
M3x18mm x46
AXA0023
M2.6X8mm x4
AXA116
M3x12mm x12
AXA114
M3x8mm x6
AXA1059
6mm Body Clip x2
AXA0147
M3x16mm x1
AXA148
M3x18mm x8
AXA150
M3x25mm x3
AXA119
M3x20mm x1
AXA121
M3x30mm x4
AXA413
M2.6x8mm x2
AXA1045
M4 Nylon Lock Nut x1
AXA0109
M3x10mm
Oversize Flat Hex Socket x4
AX31028
PIN 2.0 x11 x8
AXA1071
Washer 4x8x0.5mm x2
AXA1070
Washer 3x6x0.5 mm x1
AXA1052
M3 Thin Nylon Locking Hex Nut x13
AXA1053
M3 Nylon Locking Hex Nut x4
AXA1041
M2.5 Nylon Lock Nut x4
AXA1230
Bearing 10x15x4mm x6
AXA1221
Bearing 5x11x4mm x21
AXA1202
O-Ring 3.5x2mm x8
AXA1184
O-Ring 7.5x1.5mm x4
AXA1069
Washer 2.7x6.7x0.5 mm x8
AXA146
M3x12mm x17
AXA1393
E2.5 e-clip x2
AXA1391
E4 e-clip x2
AX30163
Pin 2x10mm x5
AXA180
M3x3mm x12
AXA0187
Set Screw M3x20mm x4
AXA291
M4x4mm x1
AXA31121
M4x12mm Cap Head x2
AXA186
Set Screw M3x16mm x8
AX30450
Flange Pipe 3x4.5x5.5 x4
AXA31185
M3x10mm x2

16
Body Assembly
AX31321
AX31049
AX31320
AX31320
AX31320
AX31320
AXA1095
AXA1095
AXA115
AXA117
AXA117
AXA117
AXA117
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118 AXA118
AXA118
AXA118
AXA118
AXA118
AXA116
AXA116
AXA118
AXA118
AXA118
AXA118
AXA145
AXA114
AXA114
AXA145
AXA118
AXA118AXA118 AXA116
AXA116
AXA116
AXA121
AXA121
AXA441
AXA441
AXA118
AXA118
AXA146
AXA118
AXA115
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AXA0422
AX31320
AX31320
AX31320
AX31320
AX31320
AX31320
AX31320
AX31320
AX31125
AX31125
AX31319
AX31319
AX31321
AX31322
AX31322
AX31319
AX31332
AX31332
AX31318
AX31318 AX31318
AX31318
AX31318
AX31319
AXA180
AXA180
AX31323
AXA0422
AXA0422
AXA0422
AXA0422
AXA118
AXA118
AXA118
AXA118
AXA118
AXA441
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA118
AXA121
AXA121
AXA441
AXA116
AXA116
AXA116
AXA118
AXA116
AXA0023
AXA0023
AXA0023
AXA0023
AXA116
AXA116
AXA116
AXA114
AXA114
AXA114
AXA114
AXA150
AXA146
AXA118
AXA118
AXA115
AXA1052
AXA1053
AXA115
AX31327
AX31327
AX31327
AX31327
AX31328

17
AX31114
AX31148
AX31148
AX31148
AXA0286
AXA0286
AX31114
AX31114
AX80072
AX80062
AX31316
AX31316
AX80062
AX31317
AX31317
AX31317
AX30500
AX80002
AX80073
AX80073
AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AXA117
AXA118
AXA118
AX80018
AXA117
AXA117
AX80018 AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AX80006
AX30392
AX30392
AX30385
AXA1230
AXA015
AXA015
AXA015
AXA015
AXA015
AXA015
AXA015
AXA015
AXA115
AXA115
AXA144
AXA113
AXA113
AXA113
AXA113
AXA113
AXA117
AXA0109
AXA1070
AXA0109
AXA0109
AXA0109 AXA144
AXA087
AXA087
AXA087
AXA087
AXA115
AXA115
AXA1230
AXA1221
AXA180
AXA180
AXA144
AXA144
AXA187
AXA186
AXA117
AXA091
AXA187
AXA180
AXA1221
AXA1221
AXA1393
AXA1221
AXA1221
AXA1052
AXA118
AXA118
AXA1052
AXA1053 AXA1230
AXA1230
AX30408
AX30163
AX31028
AX31028
AX30419
AXA436
AX30419
AX30368
AX30368
AX30450
AX30450
AX30450
AX30450
AX31114
AX31114
AX31148
AXA1221
AXA115
AX80083
AX80083
AX80083
AX80083
AX31317
AXA144
AXA144
AXA1053
AXA115 AXA115
AXA115
AXA439

18
AX31114
AX31148
AX31148
AX31148
AX31148
AX31148
AX31148
AX80071
AX80071
AX80018
AX80018
AX80018 AX1052
AX1052
AX1053
AX1052
AX1052
AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AX80018
AX31109
AX80018
AX80018
AXA144
AXA144
AX80069
AX80072
AX80002
AX30385
AX30392
AXA1230
AXA1230
AXA1221
AXA087
AXA087
AXA087
AXA087
AXA1221
AXA1221
AXA1221
AX30419
AX30419
AXA180
AXA180
AXA180
AXA015
AXA015
AXA015
AXA115
AXA146
AXA119
AXA115
AXA115
AXA115
AXA015
AXA015
AXA015
AXA015
AXA015
AX80002
AX31114
AX31114
AXA144
AXA091
AXA187
AXA187
AXA117
AXA117
AXA117 AXA117
AXA186
AXA186
AXA118
AXA118
AX31028
AX31028
AXA0286
AXA0286
AX31114
AX31114
AX31109
AX31109
AX31109
AX30392
AX30163
AX30408
AX31317
AX80070
AX80070
AX31317
AX31317
AXA113
AXA113
AXA113
AXA113
AX1052
AX1052
AX80018
AX1052
AXA117
AX80018
AX1052
AXA117
AXA1393

19
AXA1221
AXA1391
AX30163
AX30163
AX30163
AXA1221
AXA1221
AXA1221
AXA1221
AXA1221
AXA1221
AXA1221
AX31131
AX31324
AX31324
AX31324
AX31108
AX31108
AX31324
AX31131
AX31107
AX31107
AX31106
AX31106
AX31106
AX1071
AX1071
AX31065
AX31068
AX31068
AX31108
AX31067 AX31059
AX30413
AXA1045
AXA146
AXA146
AXA148
AXA196
AXA0413
AXA0413
AXA196
AXA148
AXA146
AXA146
AXA146
AXA147
AXA148
AXA148
AXA148
AXA148
AXA144
AXA150
AXA150
AXA146
AXA146
AXA146
AXA146
AXA146
AXA146
AXA146
AXA148
AXA148
AXA291
AX31059
AX31106
AX30723
AX31131
AX31130
AX31129
AX31313
AX3133
AX31323
AX31323
AX31323
AX31083
AX31083
AX31127
AX31130
AX31131
AXA1221
AXA1221
AXA146
AXA146
AXA1391

20
AX31250
AX31028
AX30249
AX31326
AX31326
AX31325
AX31320
AX31325
AX31325
AX31325
AX31325
AX31325
AX31326
AX30249
AX180
AX180
AX31028
AX31250
AX31301
AX31301
AX31301
AXA1202
AXA1202
AXA1184
AXA1184
AX31300
AX30113
AX31336 /AX31315
AX30112
AXA1041
AXA1069
AXA1069
AX31055
AX31314
AX80033
AX31301
AX31300