Axis T99 User manual
AXIS T99 Illuminator Bracket Kit A
Repainting Instructions
Available from A1 Security Cameras
AXIS T99 Illuminator Bracket Kit A
Impact on warranty
Impact on warranty
This product is approved for repaint by Axis, provided that you follow the instructions in this document and at
www.axis.com/warranty-implication-when-repainting
Risks with repainting
There are several risks when disassembling or assembling an Axis product. There is always acertain yield loss during assembly. Training
of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include:
ESD Damage -Always handle the product in an ESD safe environment. Even if precautions are taken there is always arisk of ESD
damage. The damage can remain undetected and cause problems during the lifetime of the e uipment.
Dust contamination -Opening acamera may expose the lens and sensor to dust or paint. Dust will affect the optical performance.
Lenses need to be disassembled in adust-free environment, preferably acleanroom.
Paint overspray -Masking the different components of the e uipment is critical. Failure to mask sensitive areas can cause problems
with assembling the e uipment. Any areas that are not painted at factory or have adifferent surface treatment than the rest of the
parts (threads, ground and electrical contact surfaces) must also be masked to ensure function.
2
Available from A1 Security Cameras
AXIS T99 Illuminator Bracket Kit A
How to repaint the product
How to repaint the product
Preparations
• If applicable, disassemble the e uipment according to the instructions in this document.
• Remove gaskets, screws, electrical components, connectors and plugs, windows, and domes from the parts to be repainted.
• Clean all parts to be repainted thoroughly to remove grease, dust or oil.
• To ensure reassembly and functionality of the product, mask openings for screws, LED indicators, or microphones before
painting.
Pretreatment of parts
Depending on the part material and type of paint applied at factory, different pretreatments should be done for the new paint to
adhere as well as possible. For all variants though, proper cleaning to remove oil, grease and dust is strongly recommended.
For more information on the materials used in the product, see its datasheet at www.axis.com
Powder coated parts -Using ne sandpaper, remove the original powder coating down to the base material and clean the parts
before painting, or use aprimer.
Anodised and chromated parts -Use aprimer.
Uncoated stainless steel -No special pretreatment is needed, but make sure that the surface is clean before painting.
Plastic -Use aprimer.
Disassembl
3
Available from A1 Security Cameras
AXIS T99 Illuminator Bracket Kit A
How to repaint the product
Masking
Repainting
4
Available from A1 Security Cameras
Repainting Instructions Ver. M1.6
AXIS T99 Illuminator Bracket Kit ADate: April 2018
©Axis Communications AB, 2018 Part No. T10124862
Available from A1 Security Cameras
This manual suits for next models
1
Table of contents
Other Axis TV Mount manuals
