Axler FF-2S-QR User manual

QUICK-START GUIDE
HAMMERHEAD
FF-2S-QR
Follow Focus

Drive gear 43 tooth/0.8 film pitch
Lens gear wrap 152 tooth/0.8 pitch
Rail width 0.5 in. (15 mm)
Lens diameter Max: 100 mm
Min: 20 mm
Dimensions Height: 3.5 in. (8.9 cm)
Max. width: 8 in. (20 cm)
Min. width: 6.5 in. (16.5 cm)
Depth: 3 in. (7.6 cm)
Weight 9.2 oz. (260 g)
SPECIFICATIONS
THANK YOU FOR CHOOSING AXLER.
• Please read and follow these instructions,
and keep this manual in a safe place.
• Make sure that this product is intact and that
there are no missing parts.
• Use only parts provided by the manufacturer.
• Handle the unit with care.
• To avoid damage to this product, be careful
not to overtighten or improperly thread any
of the threaded fittings.
• Clean the unit with a soft, dry cloth.
• Make sure everything is secure before use.
• All images are for illustrative purposes only.
PRECAUTIONS

1. Marking disc: Pull to remove.
2. Focus wheel
3. Stop A: Loosen the screw to adjust.
4. Stop B: Loosen the screw to adjust.
5. Reference marker
6. Stop A/B release:
Lift to release A and B stops.
7. Dual-sided drive
8. Drive gear
9. Drive gear screw: Use a 3 mm hex
wrench to switch the drive gear to the
other side of the dual-sided drive.
10. Width adjustment:
Accommodates lens diameters from
0.78 to 3.9 inches (20 to 100 mm).
11. Width adjustment locking knob
12. Rail mount: Fits most 15 mm
rail systems.
13. Rail mount locking knob
14. Adjustable lens gear: Wraps
around your lens’s focus ring. Make
sure it’s tight to ensure a solid grip.
O V E R V IE W
12
11
1
6
8
9
2
13
10
5
4
3
7
14

ONE-YEAR LIMITED WARRANTY
www.AxlerSupports.com GG1
Axler is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
This Axler product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period
of one (1) year from the original purchase date or thirty (30) days after replace-
ment, whichever occurs later. The warranty provider’s responsibility with
respect to this limited warranty shall be limited solely to repair or replacement,
at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to
replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specific legal rights,
and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Axler Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Axler along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.axlersupports.com or
call Customer Service at 212-594-2353.