Axminster Craft AC370WL User manual

AC370WL
Woodturning Lathe
Code 105116
Original Instructions
AT&M: 06/07/2018
BOOK REF : 105185

Index of Contents
2
EU Declaration of Conformity
Specification
Model AC370WL
Rating Craft
Power 750W
Speed 500-2,000rpm
Spindle Taper 2MT
Spindle Thread 1”x 8tpi (ref T04M)
Taper Tailstock 2MT
Distance Between Centres 1,100mm (43.3”)
Max Diameter over Bed 370mm
Tool Rest Stem Diameter 25mm
Overall L x W x H 1,680 x 470 x 1,155mm
Weight 97kg
The symbols below advise the correct safety procedures when using this machine.
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Dust mask
should be worn
Cert No: MC1100
Axminster Tools & Machinery Ltd
Axminster Devon
EX13 5PH UK
axminster.co.uk
Type Lathe (Wood Lathe)
Model AC370WL conforms to the machinery example for which the
EC Type-Examination Certificate No AE 50390140, AE 50398334, AM 50307837, AN 50170711
has been issued by Laizhou Planet Machinery Co., Ltd.
at:Yutai West Street Laizhou, Shandong 261400 China
and complies with the relevant essential health and safety requirements.
2006/42/EC
2006/95/EC - Annex I
EN 55014-1:2017
EN 55014-2:2015
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
Signed
Andrew Parkhouse
Operations Director Date: 22/01/2018
EU Declaration of Conformity 02
Specification 02
General Safety Rules 03-04
Specific Safety Rules for Wood Lathes 05-06
Electrical Information 06-07
Know your Wood Lathe 08
Unpacking Contents 9
Assembly 10-11
Adjustments 12
Operation 13-14
Maintenance 14
Exploded Diagrams/Lists 15-16
Notes 17-18-19

General Safety Rules
3

General Safety Rules
4

Specific Safety Rules for Wood Lathes
5

Specific Safety Rules for Wood Lathes
6
Electrical Information

Electrical Information
7

Know your Wood Lathe
8

Unpacking Contents
9

Assembly
10

Assembly
11

Adjustments
12

Operation
13

Operation
14
Maintenance

Exploded Diagrams/Lists
15

Exploded Diagrams/Lists
16
NO. DESCRIPTION Q’TY
1 HEADSTOCK 1
2 FACEPLATE 1
3 HEADSTOCK SPUR 1
4 SPINDLE 1
5 KEY 1
6 BEARING 2
7 “C”RING 2
8 SPRING 1
9 BRACKET-SHIFTING LEVER 1
10 “CRING 1
11 “C”RING 1
12 “CRING 1
13 MOTOR 1
14 KEY 1
15 SCREW 1
16 COVER-MOTOR 1
17 PULLEY-MOTOR(RIGHT) 1
18 PULLEY-MOTOR(LEFT) 1
19 SPRING 1
20 SLEEVE 1
21 “CRING 2
22 PUSH-OUT ROD 1
23 LEVER 1
24 “CRING 3
25 ECCENTRIC ROD 1
26 SCREW 1
27 “CRING 1
28 PULLEY-SPINDLE(LEFT) 1
29 V-BELT 1
30 PULLEY-SPINDLE(RIGHT) 1
31 BEARING 1
32 NUT-LOCK 1
33 NUT 9
34 CLAMP 2
35 NUTM4 2
36 “CRING 1
37 TURNING BASE 1
38 BED 1
39 BAFFLE 2
40 SCREW 4
41 HEX WRENCH 4
42 BOLT-A 1
43 CLAMP-A 1
44 HEX NUT 3
45 ANGULAR SETTING ASSEMBLY 1
46 SCREW 2
47 SPRING WASHER 2
48 GEAR ASSEMBLY 1
49 SPEED LABLE 1
51 HEX SCREW 3
52 BACK 1
53 BOLT-B 2
54 CLAMP-B 2
55 ECCENTRIC ROD 1
56 TOOL REST BODY 1
57 HANDLE ASSEMBLY 2
58 EXTENSION TOOL REST 1
59 LOCK HANDLE-TAILSTOCK 1
60 TOOL REST 1
61 TAILSTOCK SPUR 1
62 TAIL SPINDLE 1
63 TAIL STOCK SCREW 1
64 HANDLE ASSEMBLY 1
65 TAILSTOCK 1
66 WASHER 1
67 HANDLE WHEEL 1
68 SCREW 1
69 SCREW 1
70 SWITCH BOX 1
71 SWITCH 1
72 SWITCH BOX PLATE 1
73 SCREW 2
74 COVER 1
75 SPRING WASHER 8
76 POWER CORD 1
77 MOTOR POWER WIRE 1
78 NUT 20
79 WASHER 20
80 CARRIAGE BOLT STAND 20
81 STAND UPPER COVER 2
82 STAND LEG--I 2
83 STAND LEG--II 2
84 TOOL TABLE 1

Notes
17

Notes
18

Notes
19

Axminster Tools & Machinery Ltd
Axminster Devon EX13 5PH
axminster.co.uk
The packaging is suitable for recycling.
Please dispose of it in a responsible manner.
Do not dispose of electric tools together with household waste material.
By law they must be collected and recycled separately.
EU Countries Only
The Axminster guarantee is available on
Craft,Trade, Engineer, Air Tools & CNC Technology Series machines
Buy with confidence from Axminster!
So sure are we of the quality, we cover all parts and labour free of charge for three years!
For more information visit axminster.co.uk/3years