Azden APS 25 User manual

AZDEN Corporation, P.O. Box 10, 147 New Hyde Park Road, Franklin Square, NY 11010-0010
516.328.7500 [vox] • 516.328.7506 [fax] • [email protected] [email] • www.azdencorp.com [on the web]
- Specifications subject to change without notice -
APS 25
Multi-Function / Multi-Purpose
Powered Speaker System
- SPECIFICATIONS -
• High-impact injection-molded ABS case
• 4 inputs w/independent volume control
• Master Volume control
• Anti-feedback tone control
• 2 user-installable wireless module slots
• Signal-sensing auto-on circuit
• Table, stand or wall mountable
• Magnetically shield woofer
• Wide dispersion tweeter
• 115 / 220VAC user-switchable
• Two-year warranty
Rated Power 20 watts continuous
Frequency Response 65Hz – 18kHz
Max SPL @ rated output 101dB @ 1 meter
Woofer 5.25" (133.35mm) high efficiency - magnetically shielded
Tweeter 1" (25mm) dome
Crossover 1st order passive @ 8kHz
Tone Control -6dB/octave sliding lowpass (3kHz to 8kHz)
Wireless inputs 2 user-installable receivers
VHF (169-213MHz), UHF (794-806MHz) and/or Infrared
Wired inputs/output
Mic -81dBV (0.089mVRMS) for 1 watt
100KΩunbalanced, ¼" phone jack, variable
Line -40dBV (10mVRMS) for 1 watt
10KΩunbalanced, RCA jack, variable
Line-Out +15dBV max - RCA jack
Weight 8.25 lb (3.74kg) approx. w/out receivers
Dimensions 12.4"H x 7.09"W x 5.6"D (315 x 180 x 142mm)
Compliance UL, C-UL, and FCC approved
A
C Power Requirements User switchable: 110-125 / 210-240VAC - 50Hz / 60Hz
Included w/speaker Removable wall-mount bracket,
removable right-angle AC cord,
4 anti-skid pads