Aztech technologies pte ltd. Kyla am68 User manual

User Guide

Thanks for using Aztech Kyla product

If you need support or help, please visit www.kyla.aztech.com

Smart Curtain Motion

Features

· Bi-Voltage Power Supply: AC100~240V, available for global countries

· Multiple Connection: Use RJ12 port for several motors online control, and external switch operate each motor

· Stop On Block: Motor stop automatically to protect the whole system when meeting resistance

· Light Touch Function: After power on, pull the curtain slightly about 15cm, curtain will open/close automatically

· Third Limits: Except for the end limits, you can have the extra third limit in the middle to get the most comfortable indoor light

· Flexible Quiet Design: High-precision drive, leading intelligent design, beside, slow open and close make it light and smooth moving

· Various Control: According to the application, with option of RF control, hard wire, RS232/485 bus line control etc.

· Remember Limits: Motor remember the rst open and close stop, and keep no hit on the parts for longer life usage, even the power o and on again

track length track length track length track length track lengthsingle retract single retract single retractsingle retract

track & retract

curtain weight

Load Parameters

12m

90kg

82.5kg

75kg

67.5kg

60kg

67.5kg

60kg

52.5kg

60kg

52.5kg

45kg

52.5kg

45kg

37.5kg

45kg

37.5kg

30kg

46.5kg

31.5kg

24kg

Parameter 03

Model Rated Torque Work Speed Size Rated Voltage Power IP Rating

AM68 1N.m 16cm/s 310x68x50mm 80W IP20AC100~240V, 50/60Hz

Lock

Track

Belt

Sub box

Hook

HangerPulley

Hanger

Pulley

Splice Connector Single track bracket Double track bracket

Ceiling bracket

Hook

Master box

Curtain motor

Structure and Accessories 04

Single track Double track(two curtains)

Duel tracks

(fabric+silk curtain)

Distance between

two brackets ≤500mm Ceiling bracket

Installation and Wiring 05

≥10mm ≥36mm ≥56mm ≥56mm ≥56mm≥36mm

≥60mm ≥10mm

≥36mm

≥10mm

Insert the motor to main box Slide the lock bar and make sure

it is in the limit hole on the right

Check and LockedPlease check and keep the

lock bar at te left side as the image

Lock bar

Install Motor 06

1 2 3 4

Slide to the left Removing motorPull the lock bar and make

it slide out of the limit hole

Caution

Please follow the installation drawing above

Make sure the lock bar in the correct position

as image

Ceiling must be stong enough to hold the

track, motor and curtain

Remove Motor

1 2 3

Motor A Motor B

LED Indicator

AC 100V~240V

Available for more motors

Series port B

Series port A

Manual COM line

Manual UP line

Manual STOP line

Manual DOWN line

Power Cable

WiFi Antenna

433 MHZ Antenna

Program Button

LED Indicator

(WiFi)

LED Indicator (Motor)

Caution

External manual switch is dry contact mode,

function keep the same.

Wiring

Smart Wireless Control Operation Instruction

1. Download the Aztech Kyla App

Download the free Aztech Kyla App from the App Store / Google Play

to get the app on your smartphone or tablet.

2. LED Light Status

Working: OFF

Reset Network: Flashes in red & green

Network conguration:Green lights ashes 3 times

Aztech Kyla App

3. Operation

APP control: Control the curtain motor via Aztech Kyla APP. Scene control: You could preset the motor and our other devices into one scene and control them

at the same time. Automation control: You could control the motor automatically when the sensor was triggered. Such as close the curtain motor when

someone open the door.

4. Factory Reset

Power on the motor, press the reset hole button for four times and long press the button more than 3 seconds at the fth time until it ash RED & BLUE light to

reset it. Press the reset hole button again enter the conguration state. Then you cloud connect the motor to smart hub.

5. Network Conguration

Power on the motor, the motor will enter conguration state.

Go to Aztech Kyla APP, press “+” button to add the motor. If the smart hub can’t discover motor, please reset the motor and try again.

Warranty Range and Duration

One year warranty applies to most Aztech Kyla product unless other wise specied at the time of purchase. Accessories included with the main device and

batteries have a warranty of six months when buying used in Aztech Kyla products, the product warranty remains measured from the time it was bought by the

original owner.

Any other promises made by dealers beyond the guarantee of Aztech Kyla, Aztech Kyla will not assume any liability. The following cases do not belong to free

repair scope and Aztech Kyla will provide paid services. Please note.

Fill to provide warranty card and related sales invoices. Cleaning of product and wear loss under normal circumstances (such as natural loss of casing, inserting

components, aging and wear). Any product failure or damage caused by installation, usage maintenance, and storage that are not in accordance with usage

instructions. Alter or tear up barcode on products or warranty card without authorization. For those beyond change or warranty period. Product serial number or

type on warranty card does not match the product itself.

Without getting the permission of Aztech Kyla, change its inherent structure circuit privately, or dismantling or modifying without authorization.

31 Ubi Road 1, #01-05, Singapore 408694

www.aztech.com 丨[email protected]

Aztech Technologies Pte Ltd.

Product damage caused by accident, human abuse/misuse, such as output short circuit, high-voltage input, overload work, high temperature, water inow,

mechanical damage, broken serious oxidation or rusty and etc. Damage caused by transportation loading and unloading on the way of return for repair.

Product failure or damages caused by force majeure such as earthquake, re, ood lightning and so on. Product failure or damaged caused by any problem other

than product design, technology, manufacturing, quality and others.