Aztech ATB6600 Instructions for use

PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE.
ATB6600
Blender
EASY START GUIDE
PACKAGE CONTENTS
ASSEMBLING YOUR BLENDER
STEP 1
Insert the Sealing Ring (4) into the inner rim
of the Blade Holder (5).
STEP 2
Insert the Blade Holder (with Sealing Ring)
into the Jug Base (6).
STEP 3
Mount the Jug (3) on top of the Jug Base
(6), then turn the Jug clockwise until it
securely locks into place.
STEP 4
Place the Jug Cover (2) on top of the Jug,
then insert its Inner Cap (1) in a clockwise
manner until it locks into the Jug Cover.
Blender Easy Start Guide User Manual Warranty Policy
Inner Cap /
Measuring Cup
1. Inner Cap /
Measuring Cup
2. Jug Cover
3. Jug
4. Sealing Ring
5. Blade Holder
6. Jug Base
7. Ice Crushing
Button
8. Blend Button
9. Main Body
10.Pulse Button
11.Speed Selector
1
2
3
4
5
7
8
9
10
11
6

PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE.
USING YOUR BLENDER
TIPS BEFORE USING YOUR BLENDER
• Before use, please check if the power voltage of your Blender correctly
corresponds to your home’s power supply.
• Before plugging in the power adapter to a power outlet, ensure that your
Blender’s Speed Selector is in OFF position.
• Ensure that the amount of ingredients / mixture inside the Jug does not
exceed the max level indicated on the Jug.
• Do not use boiling mixtures and/or run the appliance without any Jug
contents.
• To achieve best results in blending solid ingredients, slice the ingredients
into smaller pieces (2-3cm) and slowly add these into the Jug while using
the Pulse function.
• When mixing solid ingredients start in OFF mode rst with a small amount of
liquid. Gradually add more through the opening provided upon removing
the Inner Cap.
• During use, press the Jug Cover to ensure that the Jug is properly sealed.
• In stirring thick liquid ingredients, you may use the Pulse mode to prevent
the blades from getting stuck in the mixture.
STEP 1
Open the Jug cover and add in the ingredients that you want to blend into the
Jug. We highly recommend peeling and/or removing fruit cores and cutting the
fruits / vegetables into smaller pieces rst. It is also advisable to add a small amount
of water into the mixture to facilitate a smoother blending process.
STEP 2
Securely cover the Jug with the Jug Cover and insert the inner cap (if removed) in
a clockwise manner into the Jug Cover to completely seal the Jug.
STEP 3
Select the preferred function or turn the Speed Selector in a clockwise manner to
gradually increase the blending speed.
OPTIONAL FUNCTION BUTTONS (USE THIS WHILE APPLIANCE IS ON)
Ice
Crushing
If ice is present in your mixture (e.g. smoothies, blended drinks), the
Blender will operate at MAX speed and will stop automatically once
nished.
Blend The Blender will operate for 60 seconds using the maximum speed
and would stop automatically.
Pulse Press and hold to immediately accelerate blending speed.
STEP 4
If you want to add in extra ingredients, insert these through the Jug Cover’s center
opening. You may use the Inner cap to push the ingredients into the jug.
STEP 5
Turn the Speed Selector to OFF position once the desired blending consistency
has been achieved. You may now remove the Jug from the Main body and serve
the blended food.