Aztech WIPC409HD Instructions for use

MODEL
WIPC409HD
This Easy Start Guide will help you setup your Aztech WIPC409HD to connect to your network for the first time.
Before you continue with the installation ensure that your modem’s Internet connection is UP. This Easy Start
Guide, along with the User Manual which provides a more advanced guide to this product, is included in the
Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).
APACKAGE CONTENTS
The following items below are included in your WIPC409HD package.
CINSTALLATION STEPS
Connect your Aztech WIPC409HD to your router’s Ethernet LAN port using an Ethernet
cable.
NOTE: Ensure that your router’s internet connection is UP, for you to access your
WIPC409HD via the Internet.
Connect the power adapter to your WIPC409HD camera and plug it into a power outlet
to switch it ON.
You can either set it up using your mobile phone or your Computer / Laptop. If you are
using a mobile phone, it is recommended to connect over the same Local Area Network
where your WIPC409HD is connected.
For Android Users, please go to 3A (see Page 3).
For Apple Users, please go to 3B (see on Page 5).
For Desktop / PC Users, please go to 3C (see Page 6).
•
•
•
Download and Install the Aztech IP Cam App on
Google Play. You may also scan the QR Code found
at the packaging box to automatically search for the
application.
Launch the Aztech IP Cam App then tap the Click
here to add camera button.
Scan or Search the UID*.
NOTE: This 20-digit information is found at the
bottom label of your Camera. The UID is unique for
every device.
*(Sample QR Code Only)
Enter your camera’s Security Code (password).
NOTE: The Default Password for all Cameras is
admin.
Enter the camera’s Name. (e.g. Cherry’s Camera)
then press OK to apply changes.
You may now start viewing with your WIPC409HD.
BDEVICE OVERVIEW
PAGE 4
STEP 1
STEP 2
STEP 4
3A FOR ANDROID USERS
Select your WIPC409HD Camera by clicking the arrow
key beside the camera that you wish to connect.
Tap Edit Camera.
On the Advance Setting section, tap the Advanced
button.
Wait for the Aztech IP Cam App to finish retrieving all
the Wireless Networks within range.
After retrieving the Wireless Networks, tap on the
Manage Wi-fi Networks button. A dropdown selection
list would appear.
On the dropdown selection list, tap on the dropdown
arrow to select an SSID (wireless network name).
NOTE: For a more detailed guide of the WIPC409HD IP
Camera, you may refer to the User Manual.
PAGE 1
PAGE 2
PAGE 3
Connecting your Camera to your Wi-Fi
1
2
3
4
5
1
2
3
4
To connect your camera via Wireless Settings simply follow
the instructions below:
5
1
2
34
5
12
34
56
Connect your router to your computer’s Ethernet LAN port using an Ethernet
cable.
Connect the power adapter to your router and plug it into a power outlet and turn
it ON.
1
2
STEP 3
3.
3.
WIPC409HD
Tablets / Smartphones
Computer / Desktop
Power
Adapter
Power
Adapter
Power Outlets
1
2
3.1
3.2
4
Router
6
Ethernet Cable
Resource CD
Wireless AntennaPower Adapter
Easy Start Guide Warranty Policy
WIPC409HD
Mounting Bracket
BACK PANEL
Wireless Antenna
Photo Resistance
Infrared LEDs
Lens
Built-in Speaker
External Speaker
LAN Port
External Mic
Micro SD Card Slot
WPS Button
DC Jack
78After selecting the correct SSID, enter the wireless
network’s password.
Wait for the camera to successfully connect with your
router.
After the Camera successfully connects with your
router, simply tap the OK button to finish the setup.
7
8
A. Using the Aztech IP Cam App
Built-in Mic

MODEL
WIPC409HD
This Easy Start Guide will help you setup your Aztech WIPC409HD to connect to your network for the first time.
Before you continue with the installation ensure that your modem’s Internet connection is UP. This Easy Start
Guide, along with the User Manual which provides a more advanced guide to this product, is included in the
Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).
PAGE 6
3B FOR APPLE USERS
Download and install the Aztech IP Cam App on
AppStore or you may also scan the QR Code found
at the Packaging Box to automatically search for
the application.
Launch the Aztech IP Cam App.
Click Add Camera. You may also use the QR Code
tab to scan the UID found at the bottom label of the
camera.
(Sample QR Code Only)
The 20-digit UID is unique for every device. You
may also edit the Camera Name (e.g. Cherry’s
Camera).
1
2
3
If you are connecting via Wireless, disconnect the Ethernet cable ONLY after you have completed
the setup. Your IP Camera will automatically connect to your Access Point within 2 minutes.
Disconnect and reconnect the power adapter to perform device reboot. After reconnecting, it
will take about 10 seconds before the camera will auto-pan and tilt. After the boot up process,
use the WIPC409HD Utility to launch the IP Camera’s WEB User Interface.
In using a Third Party DDNS, it is required to have an active DDNS Account. You may refer to the
Third Party DDNS Server on how to register and create an account.
Ensure that you have set the Port Forwarding feature of your router to access the IP Camera via
PC remotely. Refer to the User Manual of your router on how to enable this function.
After setting the Port Forwarding on your router, launch the IP Camera’s Web User Interface
again and uncheck the DHCP / Static box then click Submit to save the current IP Address of
the IP Camera.
It is important to ensure that the Default Device Password is changed during the Initial Set up
for User Security Purposes.
On Proper SD Card Placement, its metal contacts must be faced down. Insert the SD Card first
before turning ON the device.
Ensure to insert SD Card first before enabling the alarm notification through the FTP server.
•
•
•
•
•
•
•
Enter the Camera’s default Password.
NOTE: The Default Password for all Cameras is
admin.
Press Save. You may now start viewing with the
camera.
Select your WIPC409HD Camera to edit your
Camera. Choose Advanced Setting then tap on
Security Code.
On the Security Code setting, type the Old
Password and enter the New Password. Press OK
to save and apply settings.
4
5
6
7
PAGE 8
PAGE 5
PAGE 7
3C FOR DESKTOP/PC USERS
Insert the WIPC409HD Resource CD into the CD-
ROM drive.
On your desktop, click the My Computer icon.
Right click on the D drive (where D: is your CD-
ROM drive) then select Explore.
Copy and save the WIPC409HD Utility.exe on your
computer’s desktop for easier access.
Launch the WIPC409HD Utility and then click the
Find button to search for all available WIPC409HD
IP Cameras on your network.
Select your WIPC409HD device.
NOTE: Ensure that Auto is ticked then click the
Open button (beside the Internal Access field) to
launch the Web User Interface.
The SEClientOCX_setup.exe Message will pop up.
Click Run to install the application.
This will launch the IP camera’s web user
interface.
Input admin for both Username and Password.
For First time Use, the OCX Plug-in is needed.
Click Download and Install Player to view camera
videos smoothly.
Click the Network Tab, and select WiFi on the
submenu.
On the Enable Wireless settings, select ON.
Search for the SSID or the Wireless Network you
want to connect your WIPC409HD Camera to.
1
2
3
4
Input the password and click the Apply button to
save changes.
On the Check Wireless Set settings, click the
Check button to verify if the Wireless Setting is
successful.
Click the Apply button.
Disconnect the Ethernet cable from the Camera
and perform device reboot.
6
7
DNOTES
Connecting your Camera to Wi
1
4
1
23
45
67
6
75
2
6
5
4
5
3
.
B. Using the WPS Button of the Camera
If your router has a Wi-Fi Protected Setup (WPS) feature, you may use the WPS button
of the WIPC409HD to easily connect to your router. To do this process, you must first
check your router’s User Manual for the NUMBER OF SECONDS required in activating
its WPS feature.
1 2 1
2
Press the WPS button of
your WIPC409HD for two
(2) seconds.
Press the WPS button of
your router as seen on its
user manual (number of
seconds may vary).
NOTE: Ensure to do STEP
2 within TWO MINUTES
after pressing the WPS
button of your camera.
WIPC409HD Router