Aztech AEK3630 User manual

AEK3630
Temperature Controlled
Electric Kettle
USER MANUAL
PLEASE KEEP THIS USER MANUAL FOR FUTURE USE.

3
USER MANUAL CONTENTS
SAFETY INSTRUCTIONS.............................................................3
PACKAGECONTENTS..............................................................5
APPLIANCE OVERVIEW...........................................................5
BEFORE USE..............................................................................6
USING THE ELECTRIC KETTLE....................................................6
KETTLECAREANDCLEANING..................................................9
TROUBLESHOOTING.......................................................10
SAFETY INSTRUCTIONS
• Should damages be found on the appliance, its power cord and/or
its other components – do not use the appliance and immediately
bring it to the Aztech Service Center for repair or replacement.
• Before use, please check if the power voltage of your Electric Kettle
correctly corresponds to your home’s power supply.
• Do not, in any kind of manner, disassemble, dismantle, and/or perform
appliance repair on your own and/or replace its components using
non-Aztech approved components and/or attachments.
• Do not use the appliance and/or its components for anything other
than its intended purpose. The appliance is intended for household use
only, commercial usage would void the warranty of the appliance.
• Do not use wet hands in inserting or removing its power adapter to
prevent electrical shocks. It is recommended to thoroughly dry your
hands rst before every use.
• Ensure to ALWAYS position your Electric Kettle on a smooth, dry, and
stable ground. Placing the appliance on unstable surfaces such as
cushioned carpets and/or uneven surfaces may cause the appliance
to lose its balance during operation.
• Do not position the appliance in a humid environment and/
or in places exposed to multiple sources of heat such as stoves,
refrigerators, or ovens. It is also important to keep it away from
ammable/combustible materials such as electric burners, curtains
and/or cloths especially during use.
• Always unplug the unit before cleaning, whenever lling it with water,
and/or even after usage.
NOTE: It is STRONGLY ADVISED to ensure that you have read all provided safety
guides and operating instructions in this user manual rst before proceeding.

4
• Keep the appliance out of reach of children. If children are within
the area during use, ensure to operate the appliance with extra care
for safety purposes. Keep its power cord safely kept away and out of
reach during use to avoid unwanted accidents.
• When lling the Electric Kettle with water, ensure that the water
content does not exceed its spout. In addition, ensure that the water
to be heated is sufcient enough for boiling without drying its contents.
• Ensure that the electric kettle’s bottom and base are completely dry
before use to avoid risks of electric shock.
• Before and during heating, ensure that the lid is properly closed. In
addition, do not open its and/or even move the kettle during use.
• Always unplug the power adapter if you are done using your
Electric Kettle and allow it to cool down before doing any cleaning,
relocation, and/or appliance maintenance.
• When unplugging its power adapter, do not pull or tug its cord. Hold
the power adapter rmly on its base when unplugging it from the
power outlet. Also, ensure that its power cord is kept away from any
source of heat and/or sharp edges that may cause external damage
to the cord.
• During use, it is highly recommended to shorten the distance between
the power outlet and gyral base to reduce and/or avoid hazards
resulting from entanglement and/or tripping.
• Do not immerse or expose your Electric Kettle’s base and/or its power
cord to water or any kind of liquid substance.
• This product can only be used to heat water. Other soluble drinks
(e.g. coffee, soup, milk, etc.) should not be heated in the kettle.
• When pouring boiling water, ensure to handle the kettle carefully.
• Your Aztech Electric Kettle is not intended for people with reduced
physical, sensory or mental capabilities, and/or lack of experience
or knowledge. Constant supervision (from a person responsible for
their safety) should be provided if such individuals would be using,
cleaning, or operating, the appliance.

5
PACKAGE CONTENTS
• AEK3630 Electric Kettle
• 360OGyral Base
• Easy Start Guide
ELECTRIC KETTLE COMPONENTS
APPLIANCE OVERVIEW
• User Manual
• Warranty Policy
1
2
5
3
4
6
7
8
9 10
1. Spout and Filter
2. Lid Release Button
3. Control Panel with LCD
4. Handle
5. 360OGyral Base
6. Power Adapter
7. Control Panel LCD
8. Temperature
Adjustment Buttons
(+,-)
9. ON/OFF Button
10. Keep Warm Button

6
BEFORE USE
TIPS IN USING YOUR ELECTRIC KETTLE
• Before use, please check if the power voltage of your Electric Kettle
correctly corresponds to your home’s power supply.
• Ensure to position your Electric Kettle on a smooth, dry, and
stable ground. Placing the appliance on unstable surfaces such
as cushioned carpets and/or uneven surfaces may cause the
appliance to lose its balance during operation.
• Do not position the appliance in a humid environment and/
or in places exposed to multiple sources of heat such as stoves,
refrigerators, or ovens. It is also important to keep it away from
ammable/combustible materials such as electric burners, curtains
and/or cloths especially during use.
STEP 1: Position your
Kettle
USING THE ELECTRIC KETTLE
Before rst use, ll the kettle with the right amount of water (just below spout),
bring to boil then discard boiled water. Do this process TWICE. This will ensure that
residues left from the manufacturing process are completely removed before
using it for boiling water.
a. Position the base on a smooth, at and
dry surface.
b. The underside of the base is tted with a
cable storage feature. Unwind the length
of the cord required to reach the power
outlet and plug its power adapter to a
power outlet.
STEP 2: Fill Kettle
a. Lift the kettle from the base and press the
lid release button to open the lid.
b. Fill the kettle with cold water just below
the spout.
c. Close the kettle’s lid and place the kettle
back to its base. Ensure that the lid is
securely closed.

7
STEP 3: Select
Function
You can do any of the provided methods below
in heating your water:
• Option A. Press the ON/OFF (O/I) button, by
default this will boil the water up to 100 °C.
• Option B. Press the + (LCD will display 100°C)
or - (LCD will display 40°C) button, and adjust
until the preferred boiling temperature is
set, press ON/OFF to conrm.
During the boiling process, pressing the + or -
button will reset the selected/targeted water
temperature. However, please take note of the
following :
• If the new temperature selected is HIGHER
than the current water temperature, the
appliance would continue boiling the
water.
• If the selected temperature is LOWER
than the current water temperature, the
appliance would stop heating the water.
BOIL WATER
KEEP HOT WATER WARM
You can use the Keep Warm button to heat up
your hot water (up to 2 Hours) according to your
preferred water heat.
NOTE: If the selected KEEP WARM temperature is
LOWER than the current water temperature, the
KEEP WARM feature will not work.
You can do any of the provided options below in
keeping your water warm:
• Option A. Press the ON/OFF (O/I) button,
press the + or - buttons until the preferred
keep warm temperature is set then press
the Keep Warm button.
OPTION A SEQUENCE
OPTION B SEQUENCE
OPTION A SEQUENCE
NOTES:
• The LCD will display a blinking
100°C to indicate that the
water is already boiling.
• Temperature adjustment
is done in 5 increments/
decrements (100, 95, 90..)
NOTE: The Keep Warm function
will only work if the water inside
the kettle is below 90°C.

8
• Option B. Press the + (LCD will display 100°C)
or - (LCD will display 40°C) button and adjust
until the preferred boiling temperature is set.
Press the Keep Warm button, then press
the ON/OFF button to conrm.
ADDITIONAL NOTES:
• After using any of the provided options,
check the LCD. It should show beside
the selected temperature to indicate that
you are using the Keep Warm function.
• The Keep Warm function will not work if
the selected temperature is lower than the
water’s current temperature.
• The Keep Warm function will only work for a
maximum of 2 hours.
OPTION B SEQUENCE.
NOTE: The Keep Warm function
will only work if the water inside
the kettle is below 90°C.

9
KETTLE CARE AND CLEANING
CLEANING THE KETTLE
REMOVING LIMESCALES
1. Please unplug the power adapter and allow the kettle to cool down.
2. Using a damp cloth, wipe off its external surface to remove dirt and/
or other particles. Please do not abrasive products since these may
damage the appliance’s surface.
NOTE: Do not immerse the kettle, its power cord, including its base in
water and/or in any kind of liquid substance.
1. Pour sufcient amount of vinegar into the Electric Kettle. Ensure that the
limescaled areas are soaked in vinegar. Let the limescale get soaked in
the vinegar for 15 minutes.
2. Drain the vinegar then rinse the inner kettle thoroughly for ve (5) times
using clean water.
3. Add in 0.5L water to the pot, allow it to boil, then add 25g of citric acid.
Allow it to soak the limescale for 15 minutes before draining it again.
4. Using clean water, rinse the inner kettle thoroughly again for ve (5) times
Limescale removal is essential to help keep your Electric Kettle maintain its
heating performance. This can be done through the following steps below:

10
TROUBLESHOOTING
PROBLEM POSSIBLE REASON
1
The Electric
Kettle turns OFF
automatically
even before
boiling
Limescale buildup. Remove limescales as needed. Please
refer to the Kettle Care and Cleaning section in page 9.
There is an inadequate amount of water in the kettle.
This activates the dry-boil protection of your device. Add
more water into the kettle, and wait for two (2) minutes
for the protection feature to reset.
2The Electric Kettle
does not work
Check if its power adapter is plugged into a power outlet.
If the dry-boil protection is activated, the appliance will
stop any operation.
3
The boiled
water has a
peculiar smell
For rst time use, this is normal.
Boil a mixture of two tablespoons of Baking Soda with
water. Allow it to cool down and rinse as necessary.
4
The boiled
water seems
dirty
Limescale buildup. This kind of water is caused by calcium
carbonate and magnesium carbonate. Please refer to
the Kettle Care and Cleaning section in page 9.

Copyright © 2016 Aztech Technologies Pte Ltd (CRN:199800635M ). All rights reserved.